My 5920g (NO problems for TWO years!) deserves an upgraded hd.
What would you recommend? I currently have the WD 5400 RPM 160GB. 500GB is what I'd like.
Should I stick with WD? I'll sound like a noob saying this, but SATA2 ain't a problem for me?
the 8600M GT is getting a bit dated now and I'd like to upgrade it to something friendlier if possible. where would I look for an MXM II GPU that would work with the current cooling solution that the 5920G has? I know the same thermal specs are necessary cause it can't do better...and with just the 8600M GT, playing COD4 multiplayer gets it so hot I have to stop cause the keyboard is too hot to touch!
I've got 2x2GB SODIMM"s to drop in to it...easy access to a the new Penryn series CPU's...just want a better GPU. something NOT DDR2.
I recentely purchased a 9500M GS for my Acer 5920G to upgrade from my 8600M GS. Now I have read the sticky regarding what cards can go in the 5920G and the 9500M GS is listed as one of them. The problem I am having though is that when I plug the card in and boot my machine, I get no display.
Now, this is what I have tried. I have tried to get a backup of the BIOS on the 9500M GS so i can use Nibitor to identify what it is. I followed the VGA flashing guide to where it says about restoring the BIOS blind but my laptop doesnt seem to boot at all i.e. setting the first drive to USB Key does nothing as the light doesn't blink.
I have tried putting my system BIOS back from the latest version (3813) to previous ones (3811, 3805) and even the default one my laptop came with (3708). Again this was to no avail. My 9500M GS still wont boot.
So this leaves me to this conclusion. The cards BIOS must be from a different vendor, and I imagine it would be ASUS. Is there any possible way I could get this card working in my system.
Is this (Acer 5920g) upgradeable to 9600M GT? AFAIK, i can't find any success case over from the internet.
View 7 Replies View Relatedi'm a 3D artist and i have a pretty good workstation for doing all my projects, however, lately i've been meeting with clients at their offices and need to bring whats now MY notebook (it used to belong to my wife, hehehehe) but i definitely need to upgrade it to do on-location updates to my 3D scenes and shaders..
I know that this notebook is x64 so i need to upgrade my 32-bit vista. Wich is the fastest GPU that this machine will support? (Current: Core2 Duo CPU T5550 @ 1.83GHz)Can it support MXM II Graphics Card Nvidia Quadro FX 770M 512MB DDR3 or wich is the fastest gforce? (Current: nV. 8600m GS 256mb)Whats the max and fastest ram that it supports on x64? (Current: 3GB Sync DDR2 667mhz)Fastest hardrive supported! (Current: WD 5400rpm 320gb)
My laptop is a 1.5ghz C2D, 8600M GT DDR2 256mb (ARGH no ddr3), 160gb 5400RPM 8mb cache, with 2gb DDR2 667mhz...
yesterday, I got a 2GB Stick, (meaning I will have 3GB under Windows Vista 32-bit), and a 7200RPM 16mb cache harddrive (320gb fujitsu) to be exact.
I saw the processor upgrades, and I kept hearing it's fine for gaming unless I'm going to do heavy video editing, photoshopping do it, but do memory upgrade first, and I kept hearing HDD upgrade helps with everyday flow of operation (faster overall, meaning load up, booting, etc).
Will I see a decent performance/noticeable amount?
So now, it's 1.5GHZ C2D (T5250), 8600M GT DDR2 256MB, 320GB 7200RPM 16MB CACHE, HD-DVD/DVD-/+RW, 3GB DDR2 667MZ.
My next on the lsit is upgrade CPU to T7300, and if I can, upgrade the graphics card.
Maybe Bluetooth add-on since my phone can support syncing with that junk.
So yea, T7300, and maybe Radeon 3650 ddr3 or 8600 ddr3
I am kind of frustrated with the DDR2 Performance that this machine pulls.
I might upgrade my Laptop to 3GB DDR2 RAM, and a different MXM Graphics card. (Type II)
Where can I get an MXM II card that will work on my laptop? I heard you need to flash, but I hear some models you don't and I have to take in the thermal into account.
I am looking to play Call of Duty 4, and so on.
is the X1900 compatible? I would rather get 8600M GT DDR3, but that might be too expensive.
I have a problem with the bios upgrade on my Aspire 5920G.
I have downloaded from Acer's site the 3813 version and i try to use it with winphlash, the program that is in the folder when i unzip.
I have always an error message, the one in the printscreen.
Yes, i have opened the program with administrator privileges, the same message pops out.
I think that the problem is that i have Windows 7 Ultimate x64.
I have an Acer Aspire 5920G running Vista Home Premium that it came with preinstalled.
Now I'm itching to make the switch to Windows 7, but apparently the 5920G isn't on Acer's list of compatible computers, which has me a bit apprehensive... However, I've run the upgrade advisor and it gave me just a few minor concerns, which leads me to my question:
If I upgrade to Windows 7, will my recovery partition still be intact, enabling me to revert back to the factory defaults with Windows Vista if need be?
I already upped the RAM to 3GB but it doens't seem to do all THAT much.
The computer feels rather sluggish under Vista. I've taken down A LOT of software, services etc... but to no avail. That and it's pretty established that Vista's just not great.
I have the version with the 8600GT GPU, stock 2GB RAM (now 3) and the T7300 Core2Duo CPU.
I'm looking to get rid of the some of the lag, get a smoother system... I may need more power and therefore to upgrade the CPU but that may be expensive... :/?
Just found this and was wondering if it can be used in a regular minipcie slot. With every connector of course.
Or something like letting the X-FI chip doing all the work , processing etc. and lead the output through existing onboard audio.
[url]
There is a REAL X-Fi chip on board not those lower end ones used in usb and pcmcia solutions.
I think I am finally going to replace my Inspiron 6000 with a Studio 15. I haven't really kept up on the new technology, so I'd like to know what I should look for and what would be the best bang for my buck. I will be using it for web and school/word processing and no gaming whatsoever. I spend a lot of time on the web with multiple windows open and I do watch a good amount of video.
View 15 Replies View RelatedDoes anyone have any nice bag recommendations for the m1730? My bag that I used for my 9300 is a little too tight now
View 14 Replies View RelatedI am upgrading my video card on my C2D 2.4 Ghz M1530. I currently have a Geforce 8600m GT and was wondering which one I should get next
View 5 Replies View RelatedWondering if anyone has some recommendations on what drivers to use with this configuration. I have the Dell 5530 Broadband modem and the broadcom swipe sensor without drivers.
I can't seem to get the Vista x64 versions to install.
Is dell control point recommended or not? I have the beta versions of the nVidia drivers and they seem OK. Are there any other Dell drivers that are recommended that work in Win7 x64 or should I just wait for Dell to put some up on the support site?
i have laptop Acer 5920G
VGA card NVIDIA GeForce 8600 GT
but its performance very bad and i cant believe its up 2 1024
i barely can play FIFA 2007 and its slow!
is it up 2 VGA driver?
setup icon details say it's version is 9.1.0.429
is their any new drivers 4 it .........
My 5920G which I got for Christmas is giving me some problems.
I have gone to power options and and changed the settings so when I close the lid, nothing must happen. But when I come back in about 20 minutes after leaving the lid closed, there is no way of me getting the LCD to start up. The only way I can get past this is by pressing the power button in for a few seconds forcing it to shut down. Obviously this is bad for my notebook. How do I get this sorted out? The same thing happens if I leave the lid open and come back in a while.
well i have decided to replace the stock thermal paste on my 5920g, however, i was suprised to see that acer used therma pads intead of thermal paste
im even more suprised to see that there are thermal pads all over my gpu and cpu
heres a rough picture of how it looks like
silver color denotes where thermal pads where installed
the weird thing is that the copper plate of the heat sink only touches the parts of the picture with the orange circle
should i put AC MX-2 on the areas where i found thermal pads or just on the areas where the copper plates of the heat sink touches the core
I have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
View 8 Replies View RelatedI have had a 5920G for nearly a year and it runs great when it is plugged in. As soon as I unplug it when it is 100% charged, the battery runs out in like 30 seconds.
View 7 Replies View RelatedAcer 5920G won't charge. When I plug in the charger the light that normally comes on to indicate that it is charging does not light up and in windows the icon that indicates that it is charging does not come up either.
My PC is the Acer 5920G best buy configuration, about two years old and no components are overclocked.
I was using it when this happened, I just noticed that the light went off and then it wouldn't charge when I plugged in the charger. As far as I know all the other components work correctly though it does have poor battery life. I was downloading a large file so I had it running for about six hours straight if that makes any difference.
I've checked the charger itself and nothing came loose. The green light on the charger also lights up when I plug it in so it is probably not the outlet that is the problem plus I've tried it in multiple outlets.
I'm pretty sure its either the battery or the charger, but I would like to know for sure and get advice from anyone else who may have had this problem.
Past few days I got my 8600M GT 256MB DDR2 GPU overheated and it is broken now. Sigh!! The system was still bootable and I did even hear the login sound not until today when I just unplugged the HDD and GPU myself. When I put them back together, I won't boot as usual. It stops loading a while after I turned it on and stays freeze until I shut it off.
FYI, I removed the HDD to copy a backup of my content into another PC. While connecting to other PC, I did change some setting on the Ownership of some folder to get it accessible. As for the GPU, I just simply removed it to take a look myself and snap some photo of it, then inserted it back as before.
So, I wonder will these techies stuff I did awhile back could corrupted the bios that would make the system halted halfway.
Additional information that I would like to share is that I have decided to replace my GPU with ATi Mobility Radeon HD3650 512MB DDR2 instead of the original and did learn the method to do so. Read on some info regarding flashing the GPU, but was not sure bout it.
I tried installing Service Pack 1 and it won't boot. Microsoft has just sent me a Vista Home Premium Repair CD that will hopefully fix it. I have Recovery Discs, but then I'll lose all my data. This is the 2nd time that my 5920G has broke like this, is there a huge design flaw with this laptop?
Is Acer always like this? It was such a high end laptop for its price (8600M GT, Core 2 Duo 1.5 Ghz, 2 GB RAM, HDMI, HD-DVD, for $1099), but I can never trust this company again.
I recently bought an Aspire 5920G with geforce8600M GT 512MB and windows vista premium.
My graphics card takes more than 700 MB from the RAM memory.
I would like to know if there's a way to make it take less or even disable this option?
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
my fan is making a buzzing noise it's really enoying when i record stuff in the mic you can here it very well
View 8 Replies View RelatedMy 5920g start it wont even get to the postscreen happened right after the hdd got messed up.So i changed i figured that it was just the hdd that kept it from starting but nothing happened.So i asked and some told me it could be anything im really hopping its that its just the gcard since its the 8600m gt.One person told me to put a cd in the drive and if its spins it its probably the card and not the motherboard or cpu but idk.So best case if its the 8600m gt, could i upgrade it to the 9600m gt or the 9650m gt since they also are mxm2.
I think the bios support the 9600m gt but im not sure about the 9650m gt.
I really wana finish my fallout 3 game i was almost at the end.
so one of my hdds died on me so I decided to use the one that I was using as an external hdd.
I reformated that HDD, took out the broken HDD and replaced it with the new one.
I popped in the Recovery disc and everything started and was going smoothly until it hit 18% and it gives me this "Restore Failed - reason 0xd000001e"
I know it's possible to upgrade the hard drive in my Acer 5920G, but I've got no idea what type of hard drive to look for, and which will be compatible etc.
View 10 Replies View Related