is i got a new Aspire E3-111 that has 2GB of ram, and i want to put one of my 4GB ram stick into my laptop but it doesnt work, the ram is the same type but it doesnt work. also the laptop freezes up when i play ME3 for more then 1 hour and i have to do a hard restart... i also made a video showing whats going on
MY left shift key only work for certain keys but my right shift key doesn't work at all, i tried OSK and when i click the shift and press the key to shift its ok but when i press my right shift doesnt work
I have also already tried turning off and on again the "turn off mouse pad" button that the computer has. And it's only sometimes when I boot up the computer it won't responed, then I have to turn it off and turn it back on again in order for it to work.
Just bought an Aspire ES1-511. Not my first Windows 8.1 laptop, but my first with UEIF firmware.
I've been trying to boot Driveimage from CD to do an offline backup, and guess what, it wouldnt recognise the CD as bootable. Fixed that by setting the boot type to "Legacy" in the BIOS and it boots fine.
My problem is that the mouse doesnt work after booting from the CD. Watching the behaviour of the mouse, it powers up when I press the power button, but powers off immediately the POST completes.
If booting Windows from the HD, power to USB is restored as soon as windows loads to the lock screen.
The Fn+F3 combination on my Acer Aspire One D270 doesn't work. I have wireless internet but the Wi-Fi led is red and I can't turn it on and off. Also the combination Fn+left/right arrow which makes the screen dimmer or brighter doesn't work either. One more thing: does this model have a bluetooth device? I should mention that the OS is Windows 7 Ultimate 32-bit.
My wife's Aspire One 725 went down a couple of months ago with a bad hard drive. Of course, I hadn't maed a recovery USB. I finally ordered one from the Store, and tried it out tonight. I set the boot order to USB HDD, and, well, nothing happens! First, I see a cursor in the top left corner, and then I see the little circle of balls wait indicator, but i never get any other screen! Could I have a bad USB media from ACER?
I use V3-371-59M8 which model is for windows8 OS only but I use it w/ windows7 OS and it works well but bluetooth doesn't work at all.I got and installed BT drivers(Atheros or intel or Broadcom) for widnows7 but couldn't find any BT devices.
What is the BT adaptor brand (Atheros or intel or Broadcom??) of the model.
I have an aspire5734z laptop and can no longer control the volume with the Fn up arrow/down arrow buttons. Have no display of vol,wireless or cap lock any more. I've been through everything I can think of in control panel and can't find an answer.
I just got my Aspire V Nitro VN7-591G-75NJ today and I find that the backlit keyboard doesn't work... I type Fn + F9, and no reaction at all. I wonder if there has any solutions or I have to send it back. Also, I found that there has a tape written with "Opened" on the case... I wonder what is that mean... Moreover... why there has a paper lip stuck in the gap on the surface... But the biggest problem is how can I activate the backlit keyboard?
I started using my laptop with Windows 8 and everything was working fine. But then Windows upgraded to 8.1 and now I cannot get the Dolby Home Theater v4 to start, I always get the error message about driver.
I’ve just purchased an Acer Aspire E3 112 that came with Windows 8.1 with Bing. I have a good bootable USB stick with 14.04 on it, from which I have installed several times on different machines. Here’s what I did:
Created unallocated space on the HDD within Windows Booted from the USB Clicked on "Install" Chose "Something else" in the next dialog Created a / partition, a "Home" partition and a Swap area. Clicked on "Install"
The install went just like any other install that I’ve done over the last few years. When it finished, I clicked on the "Restart" button. The machine restarts, and goes straight into Windows. No sign of the Ubuntu install at all.
If I examine the HDD in Disk management within Windows, there are no formatted partitions in the unallocated space at all. (I’ve tried the same procedure both with Ubuntu 14.04 and Xubuntu 14.10 - both had the same result). Windows 8.1 with Bing is no different at all to “normal” Windows 8.1 ....
This is absolutely crazy. The laptop came back to me in worse shape than it was sent off. C drive was wiped, several very large scratches that were not there before, and the CD drive simply does not work. I tried loading in a CD-R at first, and it didn't recognise it, though it might be the CD. Having the CD in at startup actually slowed down the whole boot sequence immsenely.
Since then I've tried it with several different CDs, DVDs, whatever and none of them work. The DVD drive just chugs a long and never gets anywhere.
I can't afford to send this back to be fixed now because 3 weeks was an insane time for me to be without a laptop. How costly/difficult would it be for me to replace the DVD drive myself?
Under control panel: mouse properties tab hardware, there is no mouse shown. The same with device manager, there is no mouse listed. Changing mouse settings has no effect. There is still no mouse pointer, even though I can see it move when I hover over icons, I can click, and I can locate the pointer when I press ctrl (radar symbol). As soon as I plug in an external mouse, the mouse point appears, a mouse appears under mouse properties hardware, and I can move the pointer via touch pad also.
My memory card reader was fine, however after reinstalling Vista Ultimate it won't work.
It shows up as "Texas Instruments PCIxx21 Integrated FlashMedia Controller" in Device Manager. However I've tried multiple SD cards and it just won't recognize that anything has been inserted. The computer doesn't pause or show any indication that it's doing something when I insert a memory card.
I have a Ferrari 4006WLMi with Windows Vista Ultimate.
I have tried uninstalling and reinstalling the drivers several times already. I have also upgraded to the latest BIOS
I need to use a 4GB SDHC card as RAM via Readyboost...
I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
I have sent an e-mail to Acer but, as I bought my laptop in Dixons (UK retail shop) they told me that I need to speak to the "Tech Guys". These "tech Guys" are.... well...
THICK as S*** and don't usually give you any help whatsoever. Their advice was something like... it is not our fault, contact Microsoft as they are the one who developed W7...?
Anyway, moving forward, my problem is that, since I installed W7 x64 (clean install) the volume throttle does not work. I am unsure what the driver for this function is. I have tried re-installing the Synaptics drive, the Realteck HD drive...
I'm trying to get more grunt and more importantly more go/ less battery hammering (not at the same time..) out of an old TM240. So I bought a 2.8 P4 HT (SL7DS) which in theory should work in this board as it has the 852 chipset. However, when I fit it all I get is the wireless light comes on, and nothing more. Oh, and the light doesn't then go off when I press the power button again..
Works fine if I drop the Celeron back in though.
I can try sticking the P4 in a desktop I've got kicking around to make sure it works, but assuming it does, why doesn't it in the laptop? BIOS is the latest available and the board/ BIOS should be the same as the 250 series, which certainly came with P4 processors
I have a 5738z and upgraded to windows 7. I had to do a clean install as I upgraded to x64 Win7 from x86 vista to use the 4gb of RAM the machine has. The upgrade went fine, no problems. All drivers installed fine and the machine runs great. My problem is that the ePower button will not work no matter what I try (it's the P button on other models) and it wont light up green. I've used the Acer upgrade disk, which installed the launch manager software, but the button still wont work.
After I turn on the power, the harddisk led doesn't turn on, just the CAP and NUM led flash once. The screen doesn't turn on, even the Acer logo doesn't appear. I can hear something is turning inside the notebook, but it's definitely not the harddisk.
I wonder if I had pressed some wrong buttons, and disable the notebook.
I've just purshased a new Acer Aspire E5-771 (IGP, not Nvidia).
When I get into deep sleep, it can wake-up normally. I mean that after pressing power button and booting Windows, it comes back to my opened session.
But wen I get in simple sleep (close the lid or press Alt+F4), it cannot wake up. Let me be precise. Wen it is in simple sleep, the orange LED is blinking. If I open the lid, nothing happens. If I press a keystroke, the LED becomes quickly blue and then switches off (1/10 second). No noise, no image. Nothing else happen. I have to press power button to switch on the computer, but I lose my session and have to boot all of Windows.
It does this from the beginning, even with my updated drivers and with the last 1.15 BIOS.
I just bought a brand new Acer R7-572-6805. When I press power button nothing happens if AC adapter is not plugged in. I would expect laptop to start/boot because the battery inside is brand new and fully charged.
Also, I'm worried that nothing happens when I press for 4-10 seconds a battery-reset button on the bottom of the laptop in a small hole in the middle (I use paperclip).
1. Update BIOS to the newest version 2.04. Note: during flashing new BIOS version the orange LED didn't blink but shined! 2. Tightened all screws on a casing. 3. Replaced a charger. 4. Pressed batter-reset button. 5. Pressed power button for more than 10 seconds while AC adapter was plugged in, was not plugged in and when battery was not plugged in too. 4. Reinserted battery many times. 5. Checked voltage of a battery. Two cells showed 3.11V and the other two cells showed 3.81V. I manually charged the first 2 to 3.78 so that all 4 cells have similar voltage. The proper voltage makes me think that the battery is fully charged.
Other observations: 1. When AC adapter is plugged in then the orange LED is blinking (it seems to indicate that the battery is low) after approximately 6 seconds from pressing power button, i.e. from start. It doesn't change if I go to BIOS or go on with Windows boot. 2. When battery detached then the orange LED does not shine at all. 3. When AC adapter is plugged in then laptop starts. 4. Windows 8.1 is installed. The first time I used the laptop I plugged AC adapter in, powered on the laptop and went on with the installation. 5. Wall AC outlet provide 230V in my country (in contrast to 110V in US, but it shouldn't matter becuase the charger is capable of working in both systems according to its specification).
just moved to BD+ and my Power DVD 7.3 can't handle it anymore and I'm getting really frustrated with trying to get my blu rays to work. Cyberlink is a terrible company probably run by like 3 guys. The customer support is awful and I can't get anything to work anymore. I'm begining to think that getting blu ray on laptops was a bad idea. WHo knew they were going to change things on a month to month basis.
My Acer laptop died on me sometime last year, I tried to fix it, had somebody who is more techie than me look at it and we couldn't fix it. He managed to get all the data off but couldn't get it to boot up.
My brother recently had a similar problem with his desktop computer so he told me to put an XP disc in and change the BIOS so it booted from the CD ROM.
I have done this and it wont boot. It doesn't seem to recognise there is a disc in there.
When it loads, the Windows XP screen comes on, then a blue screen flashes up, can't read what it says as it doesn't stay on long enough, then the Acer screen comes up then the screen asking if you want to start up in safe mode etc comes up, if I select start as normal or from last know good configuration, it just keeps looping but if I select safe mode, a huge list of drivers comes up then it turns itself off.
I have tried to do the built in recovery but it doesn't work, just stays on please wait for hours.