I was wondering if anyone has had any success in running Battlefield 2 on their Acer Aspire AS1410? I know the 4500 can handle it and the CPU as well, albeit on low settings.
I go to start the game and it acts like it is going to run, the screen flashes, and then dumps back to desktop.
I am running Windows 7 RTM x64.
Anyone who has the Acer Aspire 1410 been able to play Battlefield 2? The game installed fine. Any time I go to start it, the screen flashes a few times like it's loading, then just dumps back to desktop. Has anyone successfully installed and played Battlefield 2 on this machine?
View 10 Replies View RelatedI have been trying to load a retail version of Windows 7 HP x64 using USB on my Windows Vista HP x86 Acer 1410. I am able to boot from USB and the Windows 7 install program starts. I select Custom Install to do a new installation (not an upgrade). After I select the partition to install to, I get an error message like "can't find a system drive to install to..." I have tried this on two different 1410's with the same results.
It was the particular USB SD Card Reader I was using. I don't have a 4GB USB drive so I was using a USB SD Card reader and an 8GB SD card. I switch to a different Card Reader (same 8GB SD card) and it worked first time!
I am trying get Windows 7 installed on my 1410 but since there is no optical drive it is a real pain. Got windows 7 installed by doing a clean install using a usb drive. Now the problem is I cannot install the Acer software and drivers that acer included on their upgrade disc. I tried running the program from my external hard drive but that does not work since it says to insert the disk. ...why can't they make it easier? All the applications and drivers are on the disk but I have no idea which to install since the disc contains files for all their models. Why would acer not make thier upgrade disc a download or something for their computers without an optical drive?
View 9 Replies View RelatedI installed Windows 7 Home Premium 64-bit on my Acer Aspire AS1410. Maybe it's normal, but the hard drive LED is solid on for about 30 seconds before it boots into Windows 7 during the floating windows screen. Is this normal?
View 10 Replies View RelatedI just received my 1410 last week and I'm absolutely thrilled with it! It runs so much faster, has better battery life and better build quality, than my HP Mini 311. I had some spare time this past weekend, so I installed another copy of Win 7 on it and it's now a dual-booter. I have re-installed most of the Acer software - but I cannot find a way to re-install the green Acer welcome screen.
View 10 Replies View RelatedOverview:
If you have never heard about Windows tax, Windows refund or anyone ever getting refund for Windows OS then perhaps it is time to look it up.
I don't think many people are aware of the fact that it is possible (and you have the all the rights to) to get a refund for Windows OS if you aren't planning to use it.
Getting Windows OS refund is like returning unused/unneeded product to get your money back. For example, if you are using Linux on your computer, why should you pay for Windows OS? Or, if your study institution provides FREE premium Windows OS, why should you pay for the crippled one that comes with your computer? Why should you even be forced to use Windows?
I decided not to pay for Windows OS. It is in the principle.
Please note: The key in getting Windows OS refund is in DECLINING the EULA agreement the first time computer boots up (or not turning computer on at all). If you accepted the EULA you are out of luck!
Here is how I got Windows OS refund from Acer Canada:
I purchased my Acer Aspire 1410 from Canadian Staples Business Depot. For 5 days I played around with it by booting Ubuntu Linux from SDHC card to make sure it was working correctly, there were no defects, etc, and after making the final decision of keeping the notebook, I picked up the phone and called Acer Technical Support (1-866-706-2237).
After getting a hold for an agent I explained that I would like to get a refund for Windows Vista Home Premium that came pre-installed on my laptop and quoted EULA agreement:
Quote:
By using the software, you accept these terms [of EULA agreement]. If you do not accept them, do not use the software. Instead, contact the manufacturer or installer to determine their return policy for a refund or credit...................
I used the upgrade kit from Acer to do a clean install of Windows 7 to my Timeline 1410. Everything works great and I love this laptop... except that the brightness controls (Fn+Left/Right Arrow) do not work. It's locked at highest brightness.
I am at my wit's end trying to figure this out.
I have installed all the Win 7 drivers from Acer's site, particularly
- Newest bios
- Launch Manager
- Chipset drivers
- Intel graphics drivers
When I first boot it up, the brightness controls work fine during the BIOS steps. But once Windows takes over, the controls no longer function. In the Windows Mobility Center, there is no brightness control panel. [FWIW, my Dell, which does have functional brightness control, doesn't show one either.] All other Fn-combinations, like volume control, work fine.
I did a complete restore of windows 7 starter on acer aspire one d270-1410. install hangs up on office 2010, currently for over 8 hours, without going any further. it's a vicious circle. can't get past office 2010 install. i have no cd drive.
View 1 Replies View RelatedMy xps 1710 with 7950 gtx (4gb ram) (100gb hdd) cant cope with battlefield 2 bad company 2 as am getting as like average 15 fps. Got drivers from dell that were updated 2 years back.
BF2 BC2 is set on lowest resolution with all setting at LOW!
What can I do to make this game play on this good fast laptop please.
Ive been playing battlefield 3 for quite a while and this low mwmory thing keeps popping up. I have 8gigs of ram in the laptop. yet i get this error.
View 3 Replies View RelatedI bought an Acer 1410 with default OS of Windows XP. Now I want to install a new Windows. Which windows is better for a good battery performance
Windows 7
Windows Server 2000
Windows Vista SP2
and one more question. Acer 1410 works with x64 or x86 OS?
In August I purchased an Acer 751h, 2GB RAM and 250GB HD. It came with Vista, which was pretty awful, but since I installed Win7 on it, I don't want to put it down because it performs so well. It's BLAZING fast, a great little machine and I absolutely love it.
My mother needs a new computer and she really likes mine. I'm considering giving it to her and getting myself the new 1410 - what do you think? Does the new processor in the 1410 make that big a performance difference?
In the benchmarks I've read, even the single core version (apparently there is also a dual-core 1410) is twice to three times as fast as the Atom in my 751 - that's pretty impressive.
I can only imagine that the 1410 with a clean install of Win7 would absolutely FLY. It would also be nice to have the different touchpad buttons and wireless N.
What do you guys think of the 1410?
Also, is it worth it to get the dual core model over the single core?
Also to confirm, the 1410 has VGA-out AND HDMI? This would save me from buying an adapter for when I need to give presentations, as most projectors are VGA-only.
I just had a blue screen of death (dump screen) for the third time in 2 months and after reboot, i get this screen:
What can i do now? I would like to recover the files i have in the HDD, as i know if i send this to Acer, they'll wipe out everything or replace a new HDD. Can i open the laptop and try to plug the HDD to some enclosure to get the files out?
Will that void the warranty?
In the BIOS, i see:
HDD Model Name: None
HDD Serial Number:
ATAPI Model Name: None
My 1410 has a problem with the display out function. It works fine with both the HDMI and VGA output when the lid is open. However, when I close the lid, the display is okay for a couple of seconds then it flashes on and off intermittently on the display that I hooked it up to. It happens with both the VGA and HDMI output signal. It only happens when the lid is closed, even though I set the computer the do nothing when the lid is closed. I thought it might be a software/driver issue, but I installed the most recent chipset and VGA drivers from the acer website with no change. This is an important feature for me to have because I use the computer with an external display the majority of the time. I am running windows 7 home premium 64bit. Their tech support has told me that Acer computers are set to not work with an external display when the lid is closed.
View 10 Replies View RelatedI have a Gateway EC1803h which as far as I can tell is identical to the Acer 1410 except for the design of the case, so I'd like to ask this to the Acer users since there are many more with the 1410 than the Gateway.
I'm running Windows Vista. I've disabled the ACPI Lid driver by changing the driver to "Volume Manager" as suggested by various internet sources for fixing the problem where closing the lid, even with the close lid action set to "do nothing" can cause the lcd to not turn on again when opening the lid.
So the problem is with hibernation. If I hibernate the machine, then resume again within let's say a minute or so, it comes back up fine. If I hibernate, then wait a longer amount of time, say 10 minutes, I can see the BIOS boot, the "Resuming Windows" splash screen, but then when I'd expect to see the login screen, instead the laptop screen turns off, and I see nothing. Oddly enough, at this point, if I plug in an external monitor, I can see the login screen there, so the OS is running properly. I can even log in. But at this point, I cannot Fn+F5 to enable the laptop screen. It's like the laptop screen has been disconnected/disabled/removed, whatever you want to call it.
Another weird symptom is that at this point, I can usually see a "System" process that ends up taking up 100% of the CPU processing, all of the time (not just spikes), so the task manager basically stays at 100%.
This feels like a software/driver issue to me, but I've been unable to find any other Acer 1410 or Gateway EC1803h users who've experienced this. I've tried the video drivers on the Gateway site, Acer site, as well as drivers from the Intel site. Same behaviour. I'm contemplating exchanging it for another unit, but only if there's a chance this is indeed a hardware malfunction.
I know this laptop was not designed for games and that's not it's primary purpose for me. However, I just wanted to see if we could have a list of the games that are confirmed to work on the Acer 1410.
I'll start. I tried Civilization 4. Works perfectly.
Looking to pick up a laptop/netbook very soon and I am pretty much sold on going with the 3810TZ but now I am seeing a lot of talk about the 1410, which unless I am mistaken, is lighter than the 3810TZ, smaller, faster (not by much but has a 3500 cpu vs the 2700) and cheaper (450, vs best deal I can find on 3810 which is 550). Same features/memory/etc?
Any actual knowledge of when the 1410 will be released? I need it very soon (for a trip in a few weeks) and i cant tell from reading these forums if it will be out then or not until october.....
Is it possible to install an internal bluetooth? is so what is the product called?
View 10 Replies View RelatedI Cant get 5.1 DTS spdif audio on my Windows 7 64 bit 1410 Acer laptop using ac3 with toslink into receiver. I'm hoping my laptop supports surround sound output but I fear it may not. I downloaded the full AC3 version since I'm using 64 bit OS. Under config speakers with windows media center I setup 5.1 speakers and clicked test and I did get a specific sound to all my speakers through my receiver. Also when I click speaker icon on bottom right of screen to get realtek digital output properties/ supported formats - I click test sound for DTS and I also get a separate ping to my 5 speakers. Under realtek advanced tab however I notice default format is limited to two channel.
Under ac3 filter config main tab I set speakers to 5.1 and checked use spdif. Under spdif tab I checked use spdif output format to 5.1. spdif passthrough I checked DTS and AC3. Under spdif/DTS mode I tried all 3 settings- auto/padded/wrapped. I'm only getting 2 channel digital audio. I think AC3 is not working right because while playing a DTS movie I don't see a AC3 icon on system tray and when I turn on ac3 config while still watching movie, SPDIF status says No data and I don't see any green spike bars for audio levals. Do I need to force AC3 to work somehow? Do I need a different mediaplayer to use as a front end? Or do I need additional software/ codecs like hailsplitter or something?
My AC3 must be working a little bit because before I downloaded AC3 mkv's would refuse to play at all. I have divx 7 by the way for video support of mkv's. I noticed even after I downloaded divx 7 for mkv support mkv's still wouldn't play without AC3. I'm using windows media player and windows media center for movies.
As you know the default OS of Acer 1410 is Windows XP, and the battery life is about 6 hours; if I install Windows Vista or Windows 7, how much it will affect my battery life?
View 4 Replies View RelatedI have an old Sony Vaio VGN-FS742/W and just got an Acer Aspire 1410. The 1410 has a 2GB PC2-5300 (333 MHz) stick of RAM. The Vaio has a 1GB stick of PC2-4300 (266MHz) RAM.
I've read that running two RAM sticks of different speeds makes them both run at the speed of the slowest stick. Could any advise whether my 1410's performance would be better by adding the 1GB from the Vaio to have 3GB RAM running at 266MHz, or just keep the 2GB already in the Acer running at the quicker 333MHz?
I'de need a pic of the mobo of a 1410/1810 after the TME mod for overclocking...
View 5 Replies View RelatedI just bought an AS1410 SOLO last month and yesterday it would not boot up at all. Called Acer tech support and they said send in for the warranty work on the notebook.
The thing is I have to pay for the shipping and to send in their defective product. Is it Acer policy? If it is then it sucks. I have a ThinkPad T43p and when I needed to send it in for warranty work, Lenovo sent me a prepaid box and all I have to do is drop the box off at any UPS store. I forgot to mention that the tech support personnel, their attitude are like I don't give a damn about your problem, you're already bought our product and you need our support now. So give it another thought before you buy any Acer product.
I have till Friday to exchange my Acer Aspire 1410 SU 3500 for the SU2300. I am seeing some people show the benchmark is much higher for the SU2300. Of course I would like to have the faster unit and better unit since I am spending $400. I dont do much gaming but I do alot of videos and work. am I better getting the Dual Core or just keeping my Single Core ?
View 10 Replies View RelatedI decided to give the PLL mod a try so I can overclock to 1.7GHz in my 1410. I got ahold of a soldering iron and an old motherboard that I practiced on, and it doesn't seem too bad once you get the hang of it.
Now that I've decided to go ahead, I try to take the case of my Aspire 1410 apart, and with all the screws removed, hard drive, memory, wireless card, I can pry the front of the case open ok, but as I get near the back (fan exhaust one side and lock/ethernet other) It seems locked in place somehow and don't want to break anything.
Is there a guide or service manual or something?
I keep hearing 4 gig support, but Sis soft Sandra tells me my 1410 supports 8 gigs of memory.
I dont know if anyone has commented on this, and just dont have time to comb through the pages on the two 1410/1810 threads.
Intel's website says that the GS4500 chipset supports up to 8GB of RAM.
[url]
Don't the 1410 and 1810 use that chipset?
Has anyone tried running 8GB of RAM in these units?
I found a couple other reviews where people said they had a noticeable (more so on dimmer settings, for me) screen flicker with their timelines. I have the 1410 with su2300 proc. Anyone else noticing this problem? It's enough to distract me, which can be annoying, but I'm a bit of a perfectionist when it comes to the visuals.
View 10 Replies View RelatedI have the Aspire 1410 -2285 with Windows 7 and the Celeron SU2300 Processor. The AC power supply clearly shows the specifications as 19 volt, 1.58, amp, 30 watt. I want to purchase another adapter but everywhere I search lists the adapter for the 1410 as 19 volt 3.42 amp and 65 watt. This include Amazon. Can I use this AC adapter with this computer.
View 10 Replies View Related