I have a new Aspire 8935G with Realtek audio (AL889, if I read it well) and I'm not able to use digital output.
I tried using a common stereo jack to RCA cable, using just the left (black) RCA to plug into the digital COAX input of my ampilfier, but nothing came from the speakers.
Do you know how to setup the digital output of the Aspire?
Hi Friends,
I am writing this new post after getting really frustrated from Googling all through the internet and not finding 1 decent solution.
I have a Dell Studio 1555 laptop and after bearing the pathetic sound quality both from the speakers and external speakers/headphones for months I finally decided to do something about it.
Apparently its not a hardware fault as everything seems to work technically fine but the sound output is really pathetic/high on treble and noise. Theres a word all around the internet that IDT High Definition Audio Codec sound drivers are bad idea and the default ones provided by Windows are much better.
Well i tried to remove, IDT Audio from my laptop permanently but to no avail. There is no option to remove at Add/Remove programs, so i went to Device manager and uninstalled the sound drivers. Upon restarting the PC the IDT audio popped backed in. So, I uninstalled once again and deleted the IDT folder but upon restarting it was back on again. Only that it took 5-6 minutes to install.
Can anyone suggest a way to remove IDT drivers permantly in Windows 7?
Thanks a lot.
Your friendly neighbourhood geek
Could some good techie please kindly mention the step by step method of restoring Dell XPS 1530 notebook back to factory settings ?
Could this setting be done at home or should it be done by an expert Dell representative ?
How to back up all the driver info and various programs info(not the actual drivers or programs,just the info about which were installed before restoration) ?
What precautions need to be taken while restoring
Does this CPU have speed step?...
According to CPU-Z, clock speed moves from 1.2Ghz to 1.3Ghz.. (nothing below 1.2Ghz)..
Is this normal?
I had an inspiron 9300 a few years back, the build quality was exceptional, it was a great laptop, great speakers, nice keyboard, subwoofer, magnesium alloy construction.
DUAL COOLING SLOTS, a 6800 go video card which in those days was top of the line aside from the gtx.
The design was silver and white which was reminiscent of some apple laptops prior to this model of inspiron. Many didnt like the design and the white trim as they say. I was neither opposed to it or extremely fond of it but I thought it looked nice.
MORE IMPORTANTLY: the laptop had separate cooling for the laptop itself and separate cooling for the video card which kept the laptop very cool and allowed the inspiron to have a powerful graphics card.
Construction was superior...no flexing of the body and no flexing of the lcd panel, you could NOT press against the back of the lcd panel and make dimples on the front of the lcd screen. It was a very durable laptop. It was about 9 pounds and some would call it large and heavy but as I am not one to fall for those terms at that time I compared the size and weight to other 17 inch laptops and it could hardly be called big or heavy. I have to wonder what kind of weaklings cannot carry a 9 pound laptop?
Dell/Singapore has started selling the AMD/ATI equipped M301Z.
Inspiron M301z: Dell's first laptop to take on AMD's new dual-core Neo -- Engadget
If it is introduced in the US at the projected price of $715, Dell will probably have a winner on its hands. It is a beautiful 13.3" laptop. I like it more than the 13R design which looks too much like the butt ugly mini 10. The 301Z refines the back end of the machine and brings the display out to the end of the bottom-half.
Now, take that aluminum design, stick an I5-540M or I7-620M in it with a HD 5650 or HD 5670 GPU.
i really want to get rid of this stupid annoying speed-step technology. there is an option in bios that will allow me to turn it off, but it will put the processor at 1.2 Ghz, i want it at its fullest at 2.00 Ghz,
View 10 Replies View RelatedI contacted the Dell support team to see whether my m1330 is affected by the bad batch of Nvidia Graphic card and I got this respond
-----------------------------
On your concern about the Nvidia Graphics, I should say that your system is not affected by it, however I am a Hardware expert with the XPS Team and would recommend to diagnose the Hardware to identify any problems.
To extensively diagnose the 'Hardware', your active participation is requested. Please follow all these steps mentioned below as they are inter related:
1. Disconnect all the devices which are connected to the system, like:internet cable,usb key,etc.
2. Power off the laptop. Disconnect the power cable from the laptop.
3. Close the system, turn it upside down, slide the battery latch and remove the battery.
4. Keep the battery out and put the system back in front of you..................
I have this odd problem with my M1530 using windows XP. I currently mainly play WoW. . . I have installed Windows XP on my M1530. . .
So heres what I do.. I open up CPU-Z .. minimize it so that I can see the current speed of my CPU in the task bar. Open WoW in windowed mode and then play so I can see my CPU speed via CPU-Z.
When I do this and Vsync is off it is normal. Speed goes 2.5Ghz @ a 12.5 Multiplier. (using vsync option in wow to control)
When I turn on Vsync instantly the Speed starts going from 2.5Ghz to 1.2Ghz and back to 2.5Ghz ...
but over and over and over, back and forth.... enough to notice while playing ... it creates stutters. I have tried everything I can think of to fix this. So if anyone has a idea please share...
When I do this and Vsync is off it is normal. Speed goes 2.5Ghz @ a 12.5 Multiplier. (using vsync option in wow to control)
When I turn on Vsync instantly the Speed starts going from 2.5Ghz to 1.2Ghz and back to 2.5Ghz ...
but over and over and over, back and forth.... enough to notice while playing ... it creates stutters. I have tried everything I can think of to fix this .....
I recently converted from a Lenovo X220 to a the Dell Latitude XT3. The XT3 is a better laptop minus a couple design choices. That said, there is one feature in particular that I will miss the most....My old X220 fingerprint reader allowed me to swipe with the latop powered down. This action would boot up the PC and log me in. This doesn't seem to work the same on the XT3. Instead, I must power it up then swipe in two separate steps.
Is there a way to get the XT3 to respond to a finger swipe while it is powered down?
I have a new Aspire 8935G with Realtek audio (AL889, if I read it well) and I'm not able to use digital output.
I tried using a common stereo jack to RCA cable, using just the left (black) RCA to plug into the digital COAX input of my ampilfier, but nothing came from the speakers.
Do you know how to setup the digital output of the Aspire?
My new Acer Aspire 6930 supposedly has the option of using the line output also for SPIDIF. Despite the fact that I have this all set up in Vista, I can't seem to get it working. I've used SPIDF with my old PC on my receiver (I ALWAYS did) so I know that everything on the software and hardware side of my digital receiver is ok. However, it doesn't seem to deliver a signal out of that jack anyway and I've tried plugging both the left and right outputs of my RCA cable into the digital coax input of my Onkyo. Do I need a special cable to get this working or what?
I can always use analog out to my receiver, but why when digital is so much cleaner? Besides, sometimes I want my 5.1 surround!
Having bought my first notebook I wanted to connect it to my 6.1 sound system. Using a 3.5 stereo jack to 2 phono leads plugged into the headphone socket I get nothing. I have tried several leads.
My sound system is a Marantz SR4300 and works fine with my Asus powered desktop but wont register the Acer. I have nothing else to try it with, but the headphones work fine. Is this a compatability issue or could the spdif be not working.
I have updated the driver to 6.01. from 5340. This model number seems to be a UK version but the label inside says 5610.
I'm awaiting shipment of a duo core 1410 Acer. My intent was on using it primarily as a HTPC. I know it has HDMI/spdif outputs but I have been told when inputting into my receiver from either of these outputs, sound will be limited to stereo 2 channel audio.
View 10 Replies View RelatedAnyone gotten sound from the SPDIF/headphone-jacket? I've connected a digital cable to this jacket to my reciever but i dont get any sound at all. I've changed to "Realtek Digital Out" in the sound options. Maybe there's some setting to switch this from analog(headphone) to SPDIF or maybe this is done automaticly?
I really hope i dont need to buy a HDMI-reciever to get digital out from this laptop, already spent much on this laptop
if any bloatware removal guides exist for Acer machines? IE, which programs can I easily remove. We recently picked up an Acer (desktop) and it came LOADED with bloatware.
View 6 Replies View RelatedI'm looking for a service guide for an acer travelmate 230/280, can anyone point me in the right direction?
I have the ones for travelmate 240/250 and aspire 1360/1520, is there somewhere I can upload them to?
i need aspire service manuel guide...
View 5 Replies View Relatedon disassembling my Aspire 7740G.I want to find my PLL chip for oc'ing.I guess i would somehow need to remove my keyboard?All attempts on my side failed (I removed all the screws i found still no success)A service manual or some info would be nice.
View 9 Replies View RelatedGuide: Clean installation of Windows 7 on Acer, heavily edited by moderators
This guide explains how to do a clean installation of Windows 7 on an Acer computer that's been licensed to used it.
If your system originally came with Windows Vista, you need an Acer Upgrade Kit.
If your system originally came with Windows 7, use the key on the bottom of your machine.
The described method will work for ANY edition (Starter/Home/Pro/Ultimate) and for ANY architecture (32/64-bit) and ANY language, but only the version you are licensed for; no free upgrades here.
Step 1: Verify eligibility for Windows 7.
CONTENT REMOVED DUE TO PIRACY CONCERNS
Either you are licensed for Windows 7 by having a key on the bottom of your machine, or you have an Acer Upgrade kit. If you have neither, then you are not licensed for it, regardless of what's in your BIOS.
Step 2: Back-up factory images and personal files.
Since we will be reinstalling Windows you will lose all your files and ability to restore to factory condition, so it would be a wise thing to make back-ups.
A. Back-up factory images.
If you want to have restore DVDs then it should be a good time to create them now. You can do it via Acer eRecovery program. If you have a built-in or external DVD drive then simply burn them and if you do not then you can save DVD image to your hard drive. Follow these instructions.
B. Back-up personal files.
If you have files you would like to keep now it is time to save them to either a flash drive or an external hard drive.
Step 3: Preparing Windows 7 installation image.
Simply use the content in this topic to download and prepare your Windows 7 DVD or USB key. This will also remove the version restriction so the burned DVD or prepped USB key can be used to install any version of Windows 7 - you'll still need the right license key, of course.
Step 4: Setting up Windows 7 installation media.
See above..................................................
I tried to open up my computer today, but couldn't get to the fan. It's overheating, so I want to clean it. I guess the service guide should have instructions on how to do it. how I could get it or how I can get to the fan,
It's a TravelMate 2424... a guide for the 2420 series should do, I think.
how to guide for dual tri or quad boot linux with xp vista or 7 or all 3
Ubuntu is available as a "live" CD, which means that you can use it directly from the CD without installing it. But running an operating system from a CD is slow, to see what Ubuntu can do running at full speed, you need to install it to your hard disk.
The ideal situation would be to install Ubuntu on it's own separate hard disk, but most people don't have two hard drives in their computer, and most people are not prepared to give up Windows. Therefore they have to install Ubuntu along-side Windows on the same hard disk in a dual-boot configuration.
Configuring a dual-boot system involves partitioning your hard disk to make space for Ubuntu. When your computer first starts, it reads information on the first sector of the hard drive which tells it where to find the "boot loader". The boot loader is a file with information about the installed operating systems and how to start them.
The boot loader for Windows is a file named "boot.ini". The boot loader for a Linux system (like Ubuntu) is GRUB (Grand Unified Boot Loader). When you install Ubuntu in a dual-boot system, it redirects the system to use GRUB. When you first start your system, GRUB presents a list of options, including starting Ubuntu or starting Windows. So you'll still be able to use your Windows operating system.
To install Ubuntu, start it with the live CD. To use the live CD, your computer's BIOS must be configured to boot from the CD drive. It's probably already configured that way, but if not, when your computer first starts watch for a message telling you which key to press to access the BIOS setup. Most computers use the F2, F1, Esc, or Del key.........
The Definitive Guide to Acer Aspire Gemstone Blue Throttling Issues v2.0
Credit Due to DarkSilver, ATG, Sgogeta4, and Unclewebb
This thread is specifically designed to put an end to the multitude of threads about people asking why their Aspire 6920G, 6930G, 6935G, 8920G, or 8930G is experiencing lackluster performance in gaming.
What Causes It
We’re not 100% certain, but through a process of elimination, we believe there are two possible causes:
•That a sensor on the motherboard is going haywire, reading internal temperatures entirely wrong. As a result, the system’s BIOS believes the CPU’s temperature is reaching dangerous levels when it’s really well within operating limits, and causes a thermal throttle to be activated. This halves the CPU’s performance until the temperatures are returned to what the system perceives as safe levels.
•It could also be potentially linked to a ridiculously low setting in the BIOS and not the fault of a motherboard sensor – this was refuted by my travel to Acer’s Canadian headquarters, where a stock 6920G was shown to operate just fine, with no throttling whatsoever. That being said, given the large number of users affected, it's still a possibility.....................
i've got a toslink to mini hooked up to an amp. i set my playback to spdif and begin playing an mp3, the sound bar is responding moving up and down but i'm still getting no sound and i know it's not the amp. is there a step i'm missing here?
View 4 Replies View RelatedI bought the Z5500 Logitech (5.1 Speakers) and the coxial cable (1 RCA plug to 1 RCA plug) but I cant make it work.. so can any1 help me please to make it work..
I have this cable adapter got it from dell to connect it to the spdif.
I have an inspiron E1705/9400 and i was wondering how the spdif function works on this laptop. I was reading some threads and some users mentioned that the s-video dongle, part # TJ965 works with E1705. I watch a lot of online videos/live events on sopcast/tvu player so i was wondering if the audio from those videos would come on my tv?
Has anyone tried it ?
Is spdif only for DVDs?
Also, i bought this crappy S-video to 3 rca shown here but all this does is show video and only if i plug in all three rca outputs to my tv...weird.
i'm just found out my dv7-1170us has spdif out, but have no prior experience with it. i'd like to hook up a headphone amp via this option.
View 4 Replies View RelatedThose of you who have a newer Studio 15, does it have an optical out on it? I'm looking at getting a Studio and having the optical is pretty important to me.
View 7 Replies View RelatedI have an HP Dv5t and I have Logitech Z-5500 speakers, how do I use the SPDIF digital, the Dv5t doesn't have the SPDIF input. In the IDT audio menu it has the option but says only thru the HP dock and Im not shelling out 100 bux for that. what can i do to use the SPDIF or Optical cables, even the analog cables?
View 4 Replies View Related
