I've got a Macbook core 2 duo, 2.2GHz (late 2007). I'm looking at some 19" Dell monitors under $200 (S1909WXF and E2009W). I notice that they have 24 pin DVI, but the Macbook has 16 pin mini DVI out. Is this a problem? Are there 24 pin to 16 pin cables?
I'm on the lookout for external monitors (20-24" WS) that work well with MBPs (13" 2.53 model in particular). I'm leaning away from Apple Cinema Displays (due to their lack of support for non-Apple computers which I own. Pl. correct me if I'm wrong in doing so).
I've hooked my Macbook Pro 15" to an external Dell monitor, keyboard and mouse and everything seems to be working fine - I can put the laptop to 'sleep', then wake it up via the external keyboard and then use the external monitor as the main monitor with the laptop screen 'asleep'.
All working fine, but only when I'm using the power adapter. If I try and run from just the battery the laptop keeps going back to sleep. It 'wakes', but after a couple of seconds goes back to sleep.
I'm looking for a 24'' external monitor and was interested in one by Asus:
Well, technically it's 23.6''...But I noticed the resolution is 1920 x 1080, meaning it is 16:9. I know my MBP has a resolution of 1440x900 making it 16:10. I understand that most widescreen TV's use 16:9, however widescreen laptops use 16:10. Will connecting a 16:9 external monitor to my Macbook Pro have any problems?
in the last week or so I have been getting Spinning beach ball of death just doing stuff like web browsing, word processing, etc. They will last aboot 10 seconds or so. And now today My external monitor will dim and come back consistently on certain web pages. It seems to change depending on where my mouse is on the page.
I have lots of hard drive space left and Plenty of RAM.
It would be easiest if I just had a camera to take a picture of it, but, alas, I do not.
I have an Acer 22" monitor that I attach via mini display --> VGA to my 13" MBP, but for some reason it isn't aligning correctly. The external monitor is set up to the right of the laptop. The native resolution of the monitor is 1680x1050, which is displaying correctly, but the entire image isn't showing up on the screen. I moved the horizontal position all the way to the 100 mark, but there is just a 1.5-2" black line going down the right side of the monitor. Also, normally if you drag an app between the laptop monitor and the external monitor it is "seamless," but right now you have to drag a little further until it shifts onto the next monitor... if that makes sense. Essentially, the whole image on the external monitor is shifted to the left about 1.5-2". The monitor seems to be fine... when I make the resolution lower, the image fills the entire screen (it's just all out of proportion and hurts my eyes).
I have tried reconnecting all the connections and resetting all the settings, but nothing is working. It's still workable right now, but it's annoying as heck.
I have MacBook Pro (late 2008) and I have WinXP installed in Bootcamp.
Recently I acquired a Dell SP2309W monitor that is capable of 2048 x 1152 resolution. When hooked to my MBP and start in WinXP, the external monitor works fine in EXTENDED mode. That is, I can move Windows to the external monitor. The MBP display is the primary display, where the Taskbar is displayed.
What I want to do is make the external monitor my PRIMARY display, with the taskbar shown there. However, the "Use this device as the primary monitor" is greyed out.
if I want to connect the macbook to an external LCD monitor, I will need a mini-DVi to DVI adapter, but the adapter is so short. So should I connect the adapter to the DVi cable that is connect to the monitor? The adapter is so short that there is no way it can be directly connected to the monitor......
I'm thinking on using my MBA as my main computer, therefore I'm considering buying the Apple Bluetooth Keyboard and the Mighty Mouse and hooking up to my HP Monitor for when I'm at my desk for long periods.
It's very easy to hook up ... this MBA seems quick enough and a usb hub can be added if need be ... why not use it as a main pc?
Further, the only windows app I'm really going to miss is Publisher, I'm thinking on being daring and installing Vista on the Mac with Bootcamp and then run Publisher in Windows. If that worked well I could get rid of the T500... (I have a desktop I could use for heavier app's, movie/music downloading) ...
Seems like a lot of work for such a small little machine, lol, can it handle it? Has anyone there done this before with success?
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
i was wondering if Apple sell Mini DisplayPort to hdmi, i know there are 3rd party cables for Mini DisplayPort to hdmi but none of them support audio. Mini DisplayPort to hdmi cable that suppots audio?
I want to buy an external monitor for my sony z590. I was wondering what resolution the graphics card on the laptop can support. I want to maintain the same 16:9 aspect ratio, so i'm looking at monitors with 1600x900 or 2048x1152.
Does anyone have any experience with this? The only reason I'm looking at the 2048x1152 is because I want to have the same clarity and sharpness on the monitor as I do on the laptop screen.
I was wondering if anybody else is having issues with using 2 external monitors with their M6400?
My configuration: I have a M6400 Covet, FX3700M, 8GB, Vista Ultimate 64, A01 BIOS, updated drivers... connected to an E/Port Plus 210W Port replicator. I have a 24" Dell 2405FPW external monitor connected to display #1 (1920x1200) and a 19" 1908WFP connected to display #2. (1440 x 900). Both are connected via DVI connectors.
My problem: The secondary monitor never has problems... However, the main monitor (24" @ 1920x1200) goes all crazy. It has red "dots" that appear all over the screen in dark areas. The bottom of the screen sometimes has horizontal bars. I see red and black vertical bars as well. The screen constantly flickers and the image hangs off the edges many times. If I change the resolution to BELOW 1440 x 900 the screen looks fine. Anything over 1440 x 900 goes crazy. (none of this occurs when using the LCD on the laptop itself)
The 24" monitor is fine. I have swapped cables and they do not help. If I plug up my desktop computer to the montior- it is perfect in 1920x1200. If I plug up my old Dell Precision M90 using it's old E/Port docking station- it too works fine in 1920 x 1200. So it's not the monitor.
Dell support doesn't know what the problem is. They say it's probably a driver issue. (I have the latest driver) They say they will contact me in the future if there is ever a solution and they are going to escalate it to their video hardware team.
Is there anybody else out there experiencing the same issues as me? If you are running dual monitors successfully with the E/Port Plus 210W, what monitors are you using, at what resolution and what connector? (DVI or that new display port thing) If you aren't using the E/Port Plus 210W- what docking station did dell sell you?
I need to get a resolution to this ASAP.
I've attached two photos taken from my digital camera showing the screen issues.
I am about to take delivery of an XPS M1330 with the 128MB NVIDIA GeForce 8400M GS graphics card. When at my desk, I am looking to use the laptop with a Dell 19-inch Widescreen LCD Flat Panel Monitor [url] I am hoping to use the external monitor at the same time as the laptop monitor (for example, Outlook on one screen and Internet Explorer on the other).
- Is this possible? Does the graphics card support multiple monitors / dual view in this way?
The XPS screen resolution is 1280x800 and the resolution of the external monitor is 1440x900.
- Will the fact that the screens have different resolutions cause any problems?
I recently purchased an XPS M1330, with:Intel Core 2 Duo Processor T8300 (2.4GHz/800Mhz FSB/3MB cache)Intel Integrated Graphics Media Accelerator X31004 GB DDR2 SDRAM 667MHz (2 DIMMs)Genuine Windows Vista Home Premium I'll mostly use it for AutoCAD, SketchUp, etc.
I want to purchase a monitor, but I'm not sure about a few details:What's the difference between buying a laptop with an HDMI entry, versus just buying one with a DVI entry (which seem to be cheaper), and get a HDMI-to-DVI cable?What's WXVGA and all those 5-letter-acronyms
I have a problem with my dell e1705 laptop. I was trying to set up an external monitor, after installing the drivers that came with the monitor i couldn't get the laptops internal monitor to start back up. I tried restarting with the external monitor unplugged but the laptops screen just glows with no picture. can anyone tell me how to enable my internal monitor? Only the external monitor shows up when i try to switch displays in the nvidia controlpanal.
I just got my new XPS M1330 With 128MB Graphic Card.
Now when i connect to my XPS M1330 with my External Monitor (Dell 24" 2408WFP) Resolution: 1920X1200
I don't see good sharpness in fonts and image. I have set native resolution that is 1920X1200
I also have Inspiron 1720 (256 Mb Graphic Card)
There its show very fine and sharp fonts and pictures.
I use VGA cable in both the systems.
Now when i talk to Dell Teach Department.
They gave me few reasons as below. My laptop screen is 13.3" and Monitor screen 24" (i know this is silly reason ) (but i argued with him and then he gave me 2nd reason)My XPS M1330 have lower graphic card (128MB Geforce 8400M GS) that is the reason i can't see clear display. To see clear sharp text and images i need batter graphic card (more then 128MB). so he said he can't help me. It is not problem of XPS M1330.
Does anyone of you using XPS M1330 with 1920X1200 Resolution?
I have a 4820TG and just bought myself a HP ZR24W. When using the Intel graphic card I have no problems but the ATI-card refuses to give me anything higher than 1600x1200. If I force it into displaying all modes it still doesn't give me anything above 1280x1080 (which doesn't work by the way). The native display of the monitor is 1920x1200. I don't have clone-display activated or anything like that, just the one external monitor. The monitor has the latest INF file and the ATI drivers are the latest that Acer have provided.
I can ad that I am connected through the VGA port and that the Mobility Radeon 5650 is supposed to be able to handle resolutions way beyond 1920x1200.
I just picked up a Z laptop. Got the docking station the VGP-PRZ1. The dock has a vga and DVI connector. When I connect two monitors to the dock the software will only allow me to turn one on. I get an error "this gpu only supports a single display"
Looking for a bit of information, Ive had my M1730 for about 1 1/2-2 years its been preety good (had to replace the PSU) no real problems. I have taken it apart a few times to clean the fans.
Just today I noticed something when I went to plug in an external monitor I only have 1 GPU core.
I only play wow casually and use it for design/work so I haven't noticed the FPS drop lol. I installed new nvidia drivers 3 weeks ago and at that time I had SLI so I must of lost one of my GPUs in that time span T.T
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook