Lenovo G550 B / G Series :: Take Of Lcd Cables Does Mainboard Continue To Give Signal To External Vga?
Aug 12, 2014i wanted to ask if on a lenovo g550 take of the lcd cables does the mainboard continue to give signal to external vga?
View 2 Repliesi wanted to ask if on a lenovo g550 take of the lcd cables does the mainboard continue to give signal to external vga?
View 2 RepliesI am running a IBM Thinkpad W540 with a Lenovo Ultra Dock Docking Station 170 (Model 40A20170US). I have 3 Asus 23.6" LED HD Monitors (Model VN247HP). These monitors have a standard VGA connection and 2 HDMI ports, By default you are provided a VGA cable and a HDMI-DVI cable. When I plug these monitors into the Ultra Dock no signal is found(including the VGA).
When I plug into the direct VGA port on the laptop, the monitor gets signal. If I use a Mini-DP connection with a Mini-DP-DVI adapter I get signal just fine. If I plug my this monitor into my desktop under HDMI and DVI connections it works just fine.
I have gone into the bios and confirmed that under display the "Video Mode on Dock" is set to Advanced(I tried standard and it did not work any better). I have the latest video drivers for the Intel HD graphics driver (10.18.10.3412) and the NVIDIA Quadro K1100M (9.18.13.4052). The USB ports work just fine, as does the power cable for the docking station. I tried applying the latest firmware update but the program runs and nothing happens. I checked for any other drivers that might have resolve the issue but have not had any luck.
I have a problem with a G550 laptop, running windows 7. No matter what I do, wifi will not work. When the manual switch is set to wifi on and i press fn+f5, nothing happens. The wifi card is recognized in windows, i have the latest drivers from lenovo support page and so on. I have tried literary everything, including windows reinstall and still nothing. When I run windows diagnostics it also says "wifi options (or something like that) are not enabled" and i tried with readycomm which says the same thing.
View 9 Replies View Relatedi have a very peculiar problem with my lenovo g550 lap, i kept it aside without using for 2 days, when i switched on the next day it didn't start, i removed the battery and tested but nothing worked only the battery charging light was glowing. suddenly after an hour and half it started working automatically and it worked fine throughout the day, next day i had same problem it started about 2hrs later...
View 9 Replies View RelatedI am currently using a G550 2958 Model Laptop, from the Lenvo 3000/Essentials Notebook Series. This laptop came with a feature called OneKey Recovery, which I have used to create recovery disks for my computer, using 2 DVDs. My problem is this: I wish to install a Linux operating system on my computer, but Lenovo filled the partition table. Here is a summary of the partition configuration:
First Partition, Unnamed, Primary, NTFS, 200-300 MB, boot flag, houses Master Boot Record
Second Partition, "C", "C:", and/or "OS Drive" (running Windows 7 Home Premium 64-bit Service Pack 1), Primary, NTFS, approximately 187 GB, contains Windows installation and personal files.
Third Partition, Unnamed, Extended, NTFS, approx. 30 GB, is a container for:
Logical Partition: "Lenovo", Logical, NTFS, approx. 30 GB, lba flag (which I take to mean it's bootable), contatins data and drivers necesarry for operating the OneKey Recovery System in respect to creating images and usage of the NOVO button.
Fourth and final Partition, "LENOVO_PART", Primary, NTFS, 13-17 GB, hidden service partition used for OneKey Recovery.
My question is this: I'm aware of the fact the OneKey Recovery will cease to function if I resize or delete any partitions in that I will not be able to create backup images or recovery disks, but since I have already done so and have no further need of OneKey, will booting the recovery disks automatically restore OneKey functionality after deletion or resizing of recovery partitions? In essence, will disabling the OneKey system through partition management permanently remove my ability to use recovery disks, or no?
I've got a Macbook core 2 duo, 2.2GHz (late 2007). I'm looking at some 19" Dell monitors under $200 (S1909WXF and E2009W). I notice that they have 24 pin DVI, but the Macbook has 16 pin mini DVI out. Is this a problem? Are there 24 pin to 16 pin cables?
View 3 Replies View RelatedI think I mistakenly applied a Windows 8 Energy Management update to Windows 7 64 on a N586 and now the volume and display screen bars do not show.
I'm unable to reload the original drivers: error message "A later version of Energy Management is already installed on this machine. The setup cannot continue"
Now can I resolve this and reinstall the original Energy Management driver?
I just bought a new U310 , the system is good as of now , but only issue which is bothering me is that it has a week wifi signal Is there any way to boost up the wifi signal.
View 6 Replies View RelatedSo I purchased a y510p from a retailer yesterday and was very happy with it. First thing I did was update to Windows 8.1. After updating, I get VERY unreliable, weak wi-fi signals and limited connectivity on all wi-fi connections. My wireless card is Intel Centrino Wireless N-2230.
View 2 Replies View RelatedI have a Lenovo ThinkPad W540 running Windows 8 (64 bit) connected to a ThinkPad Pro docking station and hooked up to a 24" widescreen monitor.
All was working perfectly for the past couple of days (since I got it) until today when the monitor will go blank, display a 'no signal' message, the laptop screen will flicker then after approx 15 seconds all is back to normal excepting the following message is displayed:-
I've tried clicking Yes and No with no permanent lasting improvement!!
i have installed win7 64b on HP nc8430 ..when i c onnect to external LCD it says no signal do i have to load AVG drivers ?
View 7 Replies View RelatedI have ordered E6400 but I have choosen Intel 5100 wifi card with two antenna port. I heard that this model isn't very good so I'm thinking about the upgrade to Intel 5300 with 3 antenna ports. I have a question about the antenna cables. How many cables are there near the wifi card in latitude with 5100? two or three? If there are only 2 cables, so the upgrade brings me no advantage.
View 10 Replies View RelatedHave had my Helix for just two days and this morning I got a 'Keyboard Dock Fan error'. I have updated all software including BIOS updates, so before I return my laptop to the reseller, my question is, is there anything I can do since I assume this is a hardware fault ?
View 3 Replies View RelatedJust recieved a lot of the new Yoga S1 laptops. I have searched the board and found others had this problem but the dates were old. Is there a new patch or fix?
Win 8.1 Enterprise 4gb ram 64 bit
I have OKR working for me beautifully. However, when I choose "System Recovery", it only presents me with selecting from C: or D: (partitions on the only internal HDD). It does not let me choose backups that it itself created on my external USB HDD ( F: ).
How do I tell OKR to select a backup that it created on an external USB HDD?
Possible to connect a X230 through Mini Dock Plus Series 3 (with USB 3.0) to 2 pairs of external monitors using 2 x Lenovo Displayport Splitters?
View 1 Replies View RelatedI have an y510p. the 1TB 5400 HDD isn't cutting it for me. I have a 256 GB SSD that I would like to swap in there. What are my options?
One Key Recovery tells me my image will be about 105 GB.
Question 1: Can I create the image on an External USB, then swap out the HDD with the SSD, then recover from the external?
Question 2: Is it possible to re-set up the one key recover partition on the SSD after all is said and done? in case in the future, I'd like to get a larger SSD.
Will all usb external dvd burners work with X61s?
View 2 Replies View Related if its possible to run 2 external monitors on the Lenovo x230.
[MONITOR 1] [laptop screen] [MONITOR 2]
MONITOR 1= connecting via mini display port to HDMI >> to monitor
MONITOR 1= connecting via VGA >> to monitor
I tried the above but I cant get it working on all 3 only - the 1 external 1 laptop screen works. Does X230 grahics card was designed to handle that?
How do I switch between internal and external microphone? I have Z500 with one connector for headphones and microphone; when I connect an external microphone there, it's ignored and recording is done automatically from the internal microphone.
View 4 Replies View RelatedI only bought the one link pro to connect my Thinkpad Yoga 2 to my Samsung monitor with WQHD-Display with 2.560 x 1.440 Pixel. Lenovo told me that this is possible. With DVI I only get the maximum 1920 x 1200 which makes round circles look like eggs...
I need the full resolution.
I there any configuration, cable, display port instead of DVI cable?
(I have the newest, best, DVI cable (forgot the specification for high resolution DVI cable, ports)).
I have the thinkpad w540
ID:
20BGCTO1WW
videocard:
nvidia quadro k2100m
Where, where! does it tell me the maximum resolution of an external display using the displayport.
I can't get past BIOS when my W530 is connected to an external hard drive, in my case a WD My Book Essential 3TB (USB 3.0).
Here are some previous threads I've found:
-W520 hangs on boot when a WD SES USB drive is connected
-W520 won't boot with SES device connected to USB
-W530 stuck or won't boot when WD external drive plugged in.
I would be satisfied if I could disable USB Legacy Support in BIOS and move on, but I can't find that option anywhere on my W530.
Here's what I've tried so far:
-Updated BIOS to the latest version (1.11) and updated WD My Book firmware.
-Changed the port (tried both USB 2.0 and 3.0, powered and unpowered) that the drive is connected to.
-Removed everything except my MSATA drive in boot priority. I can't enter BIOS settings when the WD drive is connected so I can't actually exclude it from the boot priority, but I've tried to enable Boot Order Lock.
-Disabled USB options in BIOS (USB UEFI BIOS Support, Always on USB, etc.).Switched between Quick and Diagnostic boot. With Quick it's stuck at the Thinkpad splash screen, with Diagnostic I just get a black screen.
-Tried with both GPT and MBR partitions styles for the external drive.
-Changed between UEFI and Legacy.Tried it with my friend's Thinkpad T520, wouldn't boot either with the drive connected...
Other information:
My Thinkpad is docked to a Thinkpad Mini Dock Plus Series 3 with USB 3.0 (170W). I haven't bothered to try it undocked, but judging from the other posts it's not likely to fix the issue.
Surprisingly I don't have this issue with my older WD My Book Essential Edition 2.0 1TB (USB 2.0) external hard drive. I don't think it would work to simply remove the drive from boot priority. I've removed my other external hard drive but I can still hear it spinning up during boot (when the Thinkpad splash screen shows up), which suggest that it's still being identified during boot. Is there really no workaround other than "get a different enclosure" or "unplug it when powering on"? Are there any >3TB external hard drives, preferably USB 3.0, that are known to work?
I don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
View 2 Replies View RelatedI use the Displaylink dock to connect to an external monitor, but it has suddenly stopped working. The error message said "check connections". I have done so - replaced the digital video cable between dock and monitor with a new one, cycled both dock and monitor on and off several times, but windows can not find an external display.
The Lenovo settings app has been giving me an "updating... " message for 3 days (I have raised a query on that elsewhere) so I can't use that to check out the display problem. I should say the display problem started today, and the "updating.."
I am new to the W540 and I am having problems closing my lid without disconnecting the external monitor
- Using VGA port
- Lid set to do nothing
- Ext monitor cloned
What am I missing ?
If I close the lid, my external goes blank
From a restart or a log on...
close lid - ext goes blank - sound is muted
open lid - un mute sound - close lid - ext works Is that normal ?
whenever I come to this forum I get auto loggred off - Paswword glitch (note: if you uninstall password manager remember to delete extension in chrome)
I am to be the lucky owner of an X1 Carbon soon. There is one thing that I can't find the answer for in the documentation and spec sheets:
- what is the maximum resolution that the mini displayport can handle?
The display that I'm looking to buy is running 2560 x 1080.
I run the W530 with a dual boot setup with Windows 7 and a Ubuntu distro, with the Windows as the default one.
Every time I try to boot and there happen to be a memory stick or a drive connected to the computer, it freezes on boot at the Windows logo. If I unplug the memory stick, everything is fine and it boots up normally.
Ive purchased a Thinkpad 12,7 mm SATA HDD Bay Adapter III and a Samsung 840 EVO, 500GB, SSD. Now when I swapped the DVD drive with the new SSD the same freeze happens ever time I try to boot. Ive tried to connect the new SSD to the computer and formatted it beforehand. But it keeps freezing.
Im not sure if this relates to my dual boot setup or what.
The problems still exist after I do a fresh restore with Lenovo DVDs. Also ran the Lenovo Update & Driver utility.
1. My W530 wont boot or start if I have a External drives plugged in. It stucked at "ThinkPad" screen. I have to unplug the external drive and press/old power button to shut it down. Same thing happened when the laptop is docked.
=> Contacted the technical support today. They told me I have to unplug and plug it back in everytime. I told him that there is a reason I got the dock station so I don't have to unplug and plug my external drive every time.
2. I have no problems booting if thumbs drive plugged in. But it keep "Auto run" everytime I turn on the machine.
I do not have this problem with my W500 and W510.
W530, Intel Core i7-3820, 32G DDR3 RAM, 180G Intel SSD, Windows 7 x64, NVIDIA Quadro K2000M.
I have CS18 sony vaoi , my right speaker of computer stop working , even the left speaker of headphones are also not working ,
i have check this with two different headphones , those headphones are working on other computer so they are ok ,
So is my laptop speaker is faulty ?? or my sound card is faulty ?? or my OS is faulty