Is it just me or does the font on the MacBook/MacBook Pro's seem a little blurrier than on a PC. It seems to have sort of a shadow or is blurry around the edges of the fonts?
I thought I read about this once, where the idea behind Apples OS is to make the fonts appear exactly on the screen as they do when printed?
i just bought a Sony Vaio Z (1600x900 resolution) and noticed that the 1600x900 resolution is way to small for me, cant barley see any text on the screen
so when i change to the next resolution (1280x) all the text and fonts get horribly blurry and "loses" the crisp that it had in the 1600x
I know the resolution on the new 13" pros is 1280x800, so if I plugged it into an external monitor of a higher resolution, 1920x1080 for example, would the image on the monitor be shown at that resolution, or would it still be the same res as the macbook pro, meaning it would be really pixelated on the monitor?
I'm thinking of purchasing a 15" MBP and am debating between the standard screen and the high resolution screen. I had a studio xps 16 with the 1080p screen and though it looked great so I would ideally like to get the high resolution screen. However, I wanted to see if I could get some opinions on the readability of the screen, is text readable? Does Mac OS contain a feature like Win 7 where you can increase the text size? I really liked the look and extra space higher resolution screens offer but did notice on the studio xps that without increasing the text size text (which it did by default) text and menus were too small. What are your opinions on the macbook's high resolution screen, which do you prefer?
I used bootcamp to install windows 7 on my MBP. Everything runs smoothly except the fonts on webpages look very odd. The letters appear to be very skinny.
I recently bought a new hard disk for my travelmate 800. I downloaded all the necessary drivers but seem to have a problem with the radeon vga xp driver. Its version 7.83 which seems to be the latest but the only resolution I can have the screen is 1450 x 1300 or something like that which is hurting my eyes as everything is too small. On lesser resolutions graphics and fonts are blurred. On the display settings it only shows options if you have two monitors. The ATI control panel doesnt do anything either.
My old installation still had the original drivers as far as I know and I never had this problem.
To start I should remind everyone that i'm not a mac user. I have never owned a mac or used OSX properly before today. As such, my opinions should be taken as coming from someone who has much knowledge and experience as far as PC's are concerned, but who is a total mac n00b.
First Impressions
When I first walked over to the Macbooks I was quite taken aback. The build quality is out of this world. In fact, I immediately walked over to the latest PC laptops to compare and immediately thought "manufacturing FAIL". Really, the Macbooks are italian sports cars, and PC's are 30 year old farm tractors to use the typical "car analogy".
The Macbook
I really only had any interest in the Macbook when I first went to the Apple stand, but came away with the intention of buying a MacBook Pro. Let me explain:
The MacBook's build quality is awesome. It's solid, no creaking plastic or flexable build, completely and utterly solid. Awesome.............
I have been speculating over this prospect giving the direction that Apple took with the starting price of the 24" iMac (upgrade everything else and downgrade the VRAM).
I mean, this is something I would like to see, but I wonder if it is a smart move on Apple's part given how much they make off the current MBP's with the so called Apple Tax.
And, if they made this move, one has to wonder if it still would be considered a Pro.
This is going to be my very first Mac. I'm really excited about it, but I don't know which one I should go for... I narrowed it down to these two models. Which one should I go for and why?
I bought a black macbook this summer and every night when I'm in bed trying to do work I can barely see which keys is which. Obviously this wouldn't be a cheap fix but is there a way or is it possible to install the new light up keys of the new macbooks onto a pre-remodel macbook?
question concerning the WUXGA screen on the 17" macbook pro. The questions may sound pretty basic, but I've only got experience with 1280*800 =)
Can i put the resolution of the screen on, let's say 1440*900 if i chose to? Or is it really THAT resolution (1920*1200) that is supported only?
In the case it is possible: does it look like a normal 17" screen with a native resolution of 1440*900
In the case that it is not possible: how small are the letters? I looked at a 15.4 inch screen with 1680*...? and i thought it was pretty OK. Is it comparable with a 17" 1920*1200?
Most of the time the laptop will be used for programming, and a game from time to time (but from experience i know games can be set on lower resolutions, resulting in ugly stuff, just the way i like it).
What is the probability that the next refreshed MBP will have a high res screen as an option. At least 1680x1050. I really want to buy a MBP before end of the year, but I would definitely wait if the new models have high res screens. But, who knows when the new models will be released.
I'm looking for a 24'' external monitor and was interested in one by Asus:
[url]
Well, technically it's 23.6''...But I noticed the resolution is 1920 x 1080, meaning it is 16:9. I know my MBP has a resolution of 1440x900 making it 16:10. I understand that most widescreen TV's use 16:9, however widescreen laptops use 16:10. Will connecting a 16:9 external monitor to my Macbook Pro have any problems?
I downloaded this updated for my unibody Macbook Pro, and I think it's pretty vital. However, it gave me this error when I tried to install it: "You cannot install Macbook, Macbook Pro software update on this volume. This update requires Mac OS X 10.5.5 or newer." Now don't tell me that I have selected the wrong partition to install the update, or that I need to update my OS to 10.5.5 because I already have 10.5.6 and I chose the Macintosh HD partition to install the update.
So I'm definitely getting a 13" Macbook or Macbook Pro. Apple has some great prices on refurbs so that's probably the route I'll be going however I'm having trouble discerning the difference between the 13" Aluminum Unibody standard macbook and the 13" Unibody Macbook Pro. From what I've read they both have the upgraded screen, they're obviously both unibody, both have the large button-less trackpad, and both have the 9400m. They even have the same dimensions and the only difference I can see between the images is a slightly different case bevel (also the firewire and sd card ports, both are useless to me).
Unfortunately, none of the Apple stores or BestBuys in the area have a non-pro unibody 13" Macbook for me to actually handle and compare. So, basically, what makes the pro version with the slower cpu and smaller hard drive at the same price point worth it?
If I make an image of my hdd from my white macbook with disk utility onto a hard drive I take out of a unibody macbook pro will it work and boot properly?
I will do this by taking the 250gb hdd out of the unibody macbook pro and putting it into a sata external usb hdd enclosure, then making an image of my current 120gb white macbook and writing the image onto the 250gb. After, I plan to put the 250gb hdd back into the macbook pro and boot it up normally as if everything from my white macbook was just copied onto the macbook pro.
I am running 2 external displays through the ultradock on my t440s. The built in display looks nice and crisp. My second monitor is 1440x2560. The task bar is sharp and the title of most windows looks good. All programs looks terrible. Firefox is a blurry mess.
My TV's native resolution is 1366 x 768. My VAIO FW-190 has Intel Chipset and both the Windows built in software and Intel provided graphic card settings software do not show the 1366x768 resolution. I can't find a way to set the Vaio's HDMI output to that resolution.
Im currently on a 15.4" MBP with 1440x900 resolution and text looks perfect. Im a little worried that the extreme resolution on the 17" might be too much and text wont be legible.
Im hoping people with experience can chime in with their input.
I am forced to get the 17" new MBP because of the matte option (stupid apple sells the 15" with only a glossy screen), so I will get it but only if the text is legible on websites, etc..
She has a white macbook with leopard I think, and has a separate partition in which she has boot camp, she uses specialized software that can only run in windows (doesnt run in vm). She got a new macbook air but wants to keep everything intact.
Do programs like duper clone drives with all files intact, including partitions? Keep in mind that the windows side is more important, installation of this software can only be done remotely from Russia, so it's a bit of a hassle if we screw up, we have to contact IT at a specific time and get them to do it.
Would I have to take the drive of the macbook air out? Or can i just clone to an external hard drive and then move that to the mba hard drive, in target disc mode or something.
I really love the black color of MB404, but is it good? does it crack easily?(is it plastic?)
Hows screen quality?
What do you think? which one should i buy?
I really wanted to buy Alu one before i hear about slanted keys and loose battery covers(i know %99 of them don't have that, but it's hard to risk when there's no way to fix it in here), because there's no Mac center in my country and i'm SO picky.
I've been looking at basicly two models, both got almost the exact same price tag here in Norway, so I'm not sure which one to go for.
The first ones is a MacBook Pro 15" with High-resolution 1650x1080 glossy screen, featuring the top of the line Intel Core i7-620M CPU the other is a MacBook Pro 17" with even higher resolution (1920x1200) glossy screen, featuring the slightly slower Intel Core i5-540M.
I don't list the other specifications as I don't really care about them, I already got a pair of 4GB 1600MHz CL7 (2x2GB) DIM's and a Intel X25-M 80GB SSD that I'll be using anyway.
There will be lots of movies and series played on my MacBook Pro, that's why I don't really considering paying a premium for the anti-glare screen, even though I love anti-glare and tend to struggle with glossy screens I don't see the point in actually paying more for it. And when watching movies and series, in often very dark rooms the glossy screen actually have some advantages.
The hard thing to decide here is slicker and lighter, with smaller screen and lower resolution, but better CPU versus the bigger, more heavy but featuring bigger screen and Full-HD+ resolution but slower CPU.....................
1-a 13" MacBook Pro, primary use will be Internet and e-mail and manipulating music files. Will my husband really notice a difference/benefit between the basic 2.26 and the 2.53GHZ (and is it worth about $250 more)? If he uses it for video downloading will that make a difference?
2- a 15" MacBook Pro- here I'm debating between the 2.66 and 2.8. My daughter uses it for Office apps, PhotoShop, music, Internet and e-mail. Again, would video downloading make a difference?
I am currently returning a dell studio xps 16" as its so sooo much hassle to deal with dell and the fact that i got 3 messsed up replacements in a row. i am looking to get a macbook or macbook pro. i would prefer a macbook pro (lowest model) although the cheapest method i can find is £1163 from the higher education store. is there any other way or place that sells it for less? apple seem to charge crazy prices for a low spec. een £100 would be expensive but maybe afordable. only discounts i found for the macbook/macbook pro are 14% higher education (the one i am looking to use) and 6% EPP and school discount. iv looked at the macbook but im going to use the laptop for movies, work and internet. movies on a 13.3" arnt exactly enjoyable to watch so thats why im looking for a macbook pro.
I finally decided that i am going to take my desktop HTPC from home to grad school for movies/TV and playing demanding games.
So now I cannot decide upon which notebook to get - the base Macbook Pro 2.4 or the base Macbook Air 1.6
I am going to be mainly doing work: taking notes, photo editing, and also some light gaming (2d games and old 3d games (red orchestra, combat mission) when away from apartment) on the notebook.
So I was wondering which is a better choice for me.
The macbook pro has a faster core 2 duo cpu, but the FSB and RAM are all the same speed. Obviously the 9600mGT is 2.5x faster than the 9400M, but I am not going to need it for intensive gaming.
Also the macbook pro has a larger screen.
But the Air is so much lighter and thinner, and would be a good thing to take to libraries. And it is 200 cheaper....................
A friend of mine is debating which model. I noticed some small differences, but for 200 bucks it almost seems worth getting the pro model. It seems as if it's a higher quality build, firewire, backlit keyboard, is the screen the same? What do you guys think? Can the Macbooks without the dedicated video card run a game like Sims 3?