Anyone knows the part number of a mini PCI-E 3G card that's compatible with E6400? How do you check if antenna is hooked up and ready to go? If so, is it just a matter of dropping the card in, install driver, plug in SIM card and that's it
View 4 Replies
I am just thinking is SD Controler in E6400 is SDHC capable?
View 3 Replies View RelatedWhere do I get a contactless or contact dell smart card for my e6400? I can't to find them anywhere
View 6 Replies View RelatedI am having a hard time deciding between the PC card slot and the expresscard slot offered on the E6400.
I own several PC cards and some express cards, so I would probably need an adapter to go from one to the other regardless.
Which adapter is easier to use? There is also the E6500 which has both slots. The only problem is that it weighs 1lb.
i read the manual, but didn't find any way to change the video card. let me know if this is possible, i'd like to change to more powerful video card. right now, mine is setup with nvidia quadro 160m.
View 10 Replies View RelatedI have Dell E6400 with nVidia NVS160M.
This is how E6400 base looks like:
http://support.dell.com/support/edoc...l/r-h-atga.jpg
I just do a fresh install windows XP. Everything has been installed properly (no exclamation mark) in device driver. However, 1 thing that hasn't worked is the SD card reader. I inserted SD Card and nothing shows up. I open My Computer, the only available is my hard disk (C and cd-rom (D.
I opened device manager: IDE/ATA/ATAPI controllers:
Ricoh SD/MMC host controller.
Anyone got the new 64 bit Windows 7 driver (not the Vista driver) for 5530 WWAN card on E6400 working?.
The driver installed fine on my E6400 (running 64 bit Windows 7), but Wireless Manager (downloaded from Sony Ericsson website) stopped working saying it can't find any wireless device (probably because it can't recognize the new driver)..
Then I went to get Control Point Connection Manager and noticed that there's none for Windows 7. So how do you use the WWAN card without a client?..
My SD card reader seems "dead" on my E6400 running Win7 32bit.
I've tried installing various Ricoh drivers, including the Ricoh R5C847 for Win vista/xp 32 bit. I can't find a driver for Win7 32 bit, at least not on the Dell driver-support pages .....
Dell has sent me 3 E6400 computers and all of them fail when using the docking station and then the BUILT IN Verizon card. I have more than 50 hours with technical support.
Finally they put me with their top tier support. You will not believe their answer! I would never belive it if it wasn't in writing so I am going to copy it here for you .....
My Dell 1505 wireless N card is a constant headache, If I hide my ssid the card detects and connects to my router but I can never access the internet. It may work sometimes but most of the time my SSID has to be on.
I have tested this with two different routers and the results were the same, vista shows local access only
.
I have tried using drivers from laptopvideo2go and reimaging the computer, I am now fed up and want to get a new wifi car
Just swapped out my e6400 with the nVidia 160M GC fro a 6400 with the Intel card (due to heat issues).
I tried just swapping the hard drives so that I wouldnt have to reinstall the OS.
Its not letting me start Windows.
I think the issue is that I dont have the drivers on my older HD for the new motherboard/GC.
I have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I've been having problems with my video card. (M1710 with a 7950GTX card). The card was overheating and even after applying AS5 and cleaning the vents it was reaching around 100c in games. After about a year, i started to also get memory parity errors...
Long story short, i contacted dell and they mailed me a new mb and a new video card.
I just got it now, and i am going to open the rig and replace the video card.. I am just not sure about the mother board, should i replace it as well ?
The parts that dell sent are refurbished parts, and as i know that my m.board is working i am not sure whether i should replace it or not.
My main uses with be photo-editing (Photoshop) video watching, and light-to-moderate gaming. Will there be a noticeable difference if I make the jump to 512? Are the any games that are playable on the 512 that are completely unplayable on the 256 (ex. GTAIV)?
View 10 Replies View RelatedI bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
Looks like atheros is highly recommended but I'm not sure if I have to be concerned about compatibility (meaning if drivers will be an issue)
View 4 Replies View Relatedits really dumb that am asking about this... i have upgraded to creative x-fi on my dell..
then is this upgradation a hardware chip inside or its just simple a software for the default IDT audio on the machine...
I performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
You can't Change your Graphics card, is there any graphics card that i can use through the PCI express slot, or the the expansion port? the laptop is hp pavillion dv2000 (exactly: dv2132ea) since i don't want to go through the hassle of changing my laptop. I just need a better vga card
View 5 Replies View Relatedsomeone said it was better to use 64 bit vs 32 bit for vista and was wondering if this is real? and wat are the benefits of using 64 bit over 32 bit and vise versa? except to utilize all of my 4 gigs of ram.
also the dell rep said their driver support for the 64 bit was not as good as the 32 bit and was wondering if this is true?
and will some games not work on 64 bit or does that not matter?
oh and someone said when you reformat you should reformat in ahci mode, and was wondering how you do that
I have a choice between 2 specific E6400's. What I really want is a backlit keyboard and the integrated graphics (battery life is important to me).
The problem is, from the two models available to me, one doesn't have the backlit, while the other has the NVIDIA.
The one with the NVIDIA is $100 more expensive. So the question is, is it possible to either upgrade manually to the backlit keyboard, or downgrade manually to the Intell 4500? How difficult and expensive would either option be?
I installed XP and everything seems ok but the computer doesnt want to suspend. When I click the power button (which is setup for suspend) or try to suspend any other way (like shutting the lid) the system will shut down but will come back online after about a minute or so. It doesnt want to go to sleep! Bad Boy. I have noticed that if I take off the power cord, it will go into suspend and stay there properly. I have tried two different power adapters, so I dont think its adapter-related. Its really annoying to have to totally shut down every time. I've tried disabling settings and hardware in the bios to no avail. I have DCP installed.I want to upgrade my WiFi link card to a wireless-n version. I guess this is the wifi link 5300 card. I actually bought one but its full height (533AN_MMW), so now I have to go an get the half height version (model 5333AN_HMW, right?!). One issue though, I dont know if my laptop has a third antenna cord in there for the third leg of the antennas. Can I add one? I am using a wireless N Dlink router.
Will this one work in my e6400?[url] I'm a little nervous about it because of the "G2" at the end of the model #, and the website says its for the centrino and I have a latitude.
I bought a new Dell E6400 laptop with Intel P8400 CPU. I tried installed Windows Vista, but the CPU experience index was only 3.0. I tried RMClock utility and it shows only 0.85 Ghz. I think I installed all needed drivers (Chipset driver, System Software etc.) and I set High Performance mode. But still 0.85 GHz. Any ideas how to force it to 2.26Ghz?
View 10 Replies View RelatedI went through around 100 pages of the long thread on e6400 but could not find much real information on the e6400. Can someone who knows post the following:
1. Good and Bad LCD manufacturers for the WXGA+ LED display.
2. Keyboard - specifically compared to a thinkpad keyboards.
3. Any Heat related issues the laptop has.
4. Other trouble spots to watch out for.
I'm pretty new to Dell notebook world. I was always told that Dell has a stinky customer service and their image wasn't that good around spot but care sharing whats good and bad about dell in general?
1- In the LCD option, it says touchscreen. Does that mean I can somewhat use this laptop like a tablet? ( Without the ability to twist the screen of course..)
2-Never knew whtas the different between 1dimms and 2dimms in RAM....
3-Compare Geforce 9400gs with the Mobile Intel® Graphics Media Accelerator X4500HD With PC-Card. Plus, what do they mean by "PC-Card" or "EXpress card" ?
4-Does Dell notebook actually give us 64bits windows or they're all 32bits unless they mention the option of 64bits?
5-Whats the difference between the normal e6400 model and the ATG model? Simply more durability +weight?
6- Whats an encrypted HDD or a ruggedized HDD?
7- I'll be using the notebook for design purpose. Such as photoshop, flash, illustrator or such. I'll be using 2-3 program at once with several picture/projet +internet + music. If my specs are 2.26ghz or 2.4ghz + 4gb ram + intel HD4500HD, will this notebook handle it?.............................
I wanted to do this for a while. My dell e6400 has 1280x800 display. I want to upgrade to 1440x900.
I found this one New SCREEN 14.1" WXGA LCD for DELL E6400 B141PW04 on eBay (end time 14-Jun-10 15:54:13 BST)
on ebay.
Does anyone have experience of dealing with ebay screens, i mean are they what they say they are(working properly and stuff)?
Is there anything special I need to be looking for then buying new screen?
i got my e6400 with 1280x800 resolution screen. I notice that this screen have greyness comparing to other laptops and right colour are really important to me.
Is it possible to replace my screen to high resolution one(1440x800)?
Can i replace processor as well if i decide to do so in the future?...
I have a new spare keyboard for my e6400. I need to sell it and was wondering what other models would it fit. e6500 and e4300 maybe?..
what would be an honest price?
