i got my e6400 with 1280x800 resolution screen. I notice that this screen have greyness comparing to other laptops and right colour are really important to me.
Is it possible to replace my screen to high resolution one(1440x800)?
Can i replace processor as well if i decide to do so in the future?...
I recently bought a Latitude E6400 with a Seiko-Epson LED display (1280x800) and find the whites to be too intense, which gives me a headache.
Turning down the brightness either did not help much or made the display too dim overall.
I did not have such problems with other laptop or desktop monitors, whose whites appear to be more yellow.
I just undocked (where I have two monitors) and am now using Outlook with a LinkedIn addon feature on my laptop. For some reason,
when I open the LinkedIn app, the screen that opens is nowhere to be found. Its in mytaskbar but when I open and close it, its flying off to the right as if there were a second display still attached.
I checked the display settings and I am on one monitor.
Any idea how I can get that window to display on this screen?
I've got a co-worker that just got an E6400 and E-Port Plus docking station with 130W power supply.
The machine is running 32-bit Windows XP with an nVidia Quadro NVS 160m and she has two Dell 2001FP monitors connected to the DVI ports on the docking station.
I can't seem to get dual displays on the external monitors. With the laptop closed and docked, the machine only recognizes one of the monitors that is plugged in to the dock.
I have a Dell Latitude E6400 and want to connect the laptop to my TV (Samsung LCD) via HDMI.
I bought a DisplayPort to HDMI Adapter (http://www.delock.de/produkte/gruppe...0cm_65091.html)
Have you guys found any ways of improving the display quality of the E6400 WXGA+ LED backlit screen? I've noticed that compared to my Lenovo 19 inch widescreen LCD monitor, the colors are less rich, the blacks seem less deep (almost a bit washed out)
View 8 Replies View RelatedSo I've just got a e6400 for e-port plus.
Is it possible to have two external monitors AND the laptop display all running at the same time? If so how?
Even better would be this: I have two external monitors - both vga with no DVI (oh well). Can I get this working?
I'm very close to buying a Latitude E6400 or E6500, but I have a few questions before I pull the trigger. I'm hoping that a few E6400 and E6500 users can help me out...
1- Displays- are they all matte finish or ??? If I go with the E6500, I definitely want the WXGA+ (1440x900) LED-backlit option, but I'm thinking WXGA or WXGA+ (LED-backlit) will do on the smaller E6400.
2- Color choices- I know that Regal Red and Regatta Blue are offered in addition the standard Brushed Metal Black finish. Other than the tiny photos shown on the Product Details page as representations of each color, I can't seem to find any larger photos of the Red or Blue models! Is it a glossy or more of a matte/flat finish.....or should I just stick with the Brushed Metal Black?
3- Which size- 14.1" (E6400) or 15.4" (E6500)? The lighter weight and smaller dimensions of the E6400 are very appealing. I'm just wondering if there are any significant benefits that the E6500 would provide over the E6400 (other than the availability of a WUXGA display)?
4- Thermal Management- The reviews I've seen were models with the P8400 processor and integrated graphics. Heat management was very good on those configurations. Does that hold true for models wity T9400/T9600 processsor and the nVIDIA graphics card? Is fan noise ever a problem?
I know there are users who have been able to get sound out of their E6400s over Displayport, but all the users i have heard from and read about this from have had integrated intel video. Are there any E6400 with nVidia quadro nvs160 users that have successfully gotten digital audio out through the displayport using a displayport --> HDMI cable?
View 10 Replies View RelatedThe latest version of the Intel Intel Display Adapter Driver available on the Dell website is 6.14.10.4980 dated 08/25/2008..
The Intel website shows Version 6.14.10.5029 dated 01/21/2009 is available..
Has anyone updated their E6400 to this new driver? Does anyone know of any specific benefits or problems with this new driver?..
I've dell Inspiron N5110 and I'm using it since past 3 and half years. In 2013, base of the laptop was broken and I had to replace it with a new one though there was no problem in hardware at all. Soon after the dell representative installed the new base and left my house I was facing a weird problem. When I power on the laptop, my screen gives a mild flash but does not start (6 out of 10 times, not always), but I can hear windows start up sound in the back ground. I use to press power button again to lock or stand by the laptop and then move my mouse. After performing this I can see the screen glows and log on screen shows up.
I was using my laptop like this for past 1.5 years as pressing a power button was no big deal. Today on the eve of new year, I saw my trick does not work any more. I was not able to start my screen even after repetitive attempts. But I remember I used it last night, display was really fine.
I should like to connect my old hp2710p to TV via HDMI. So I connect the displayport of the docking with an hdmi adpater but it doesn't work.
If I connect my hp2760p, everything goes.
The 2710p has w7 32bit, last version o BIOS and drivers.
I've purchased a HP Pavilion 15-n011tu Notebook. I'm unable to install display driver for WIndows 8 (64bit). I've tried all 3 drivers given on HP site.
1.NVIDIA Graphics Driver (2013-10-02 , Version9.18.13.1170, 318.33M)
2.AMD High-Definition (HD) Graphics Driver (2013-08-16 , Version12.105.9.0, 204.81M)
3.Intel High-Definition (HD) Graphics Driver (2013-08-16 , Version9.18.10.3224, 136.34M)
I am having problems connecting an external monitor, Dell 2709W, to my Elitebook 820 G1.
I have an Intel HD 4400 graphics solution. The monitor says:
Out of range signal
Cannot display this video mode
change computer display input to 1920 x 1200 @ 60Hz.
I use a Display Port cable for the connection.
My OS is Win 8.1 64bit
I have used the HP support assistant to update all hardware drivers...
After running my B570 (1068) with an extended display, the unit went into hibernation. On wake-up the laptop screen is indecipherable garbage. The second display will run to show BIOS startup but then reverts to the built-in screen - which is illegible. Toggling the F3 key does not get a good screen.
I read another post suggesting this is a hardware failure. What parts have failed?
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
View 2 Replies View RelatedI cannot adjust the brightness of my display using the Fn keys or the Control Panel... I have already had to replace my battery once... I need to be able to adjust the brightness in order save my battery life!
View 8 Replies View RelatedA few weeks ago I cracked my glossy 1366x768 display on my Envy DV6 7227SA (product number C4V06EA#ABU). I have found a replacement online (part number 682089-001) but I was wondering if I could replace it with a matte 1920x1080 display (Part number 682090-001). I'm running Windows 8 64 bit
EDIT: This is the part I currently have in my notebook (broken) - [URL] ....
And this is what I'm wanting to replace it with - [URL] .....
I am running Win 8.1 x64 (up-to-date) on HP Pavilion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012..
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates..
I changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TO WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Any driver i have to install ? if required then driver download link.
Today, I tried connecting an external display to my HP ENVY TouchSmart 15 laptop, via a USB hub, only to discover that using the touch screen points at the corresponding part of the external display rather than the inbuilt one (the displays are being extended). Can this be changed?
I'm using the same 64-bit Windows 8 installation and drivers that the computer came with.
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
View 1 Replies View RelatedThe monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
I noticed the display automatically adjust its brightness when I open different webpages with different color background, which I'd rather it not do. How to disable this dynamic adjustment?
Product Name:
HP Pavilion dv7 Notebook PC
Product Number:
A5F92AV
OS:
Windows 7 home premium 64 bit
I have the option of upgrading to the Infinity display for $25 more. What is it and what are the pros and cons?
View 7 Replies View RelatedI have a pavilion dv6 6190se and I cant find an update of display driver in HP support and when i download the update from AMD site it doesn't work. the latest update on this site is v8.882 and i doesn't support win8 and it goes back to 2011-11-18. is there any way to update it?
View 7 Replies View RelatedThe HP dv4-1548dx laptop computer has keys to adjust the display brightness of the LCD display but no keys to adjust the contrast. "Operating system Windows 7" How can I adjust the Contrast ?
View 2 Replies View RelatedOne of our employees has an HP Pavilion G6 laptop. He uses an external display at work but has to keep the screen of the laptop open. If he closes the screen, then the video to the external display is power off.
What are the settings to allow the laptop screen to be closed and still be able to get video to an external display.
Have a dv5tse series, need to know what caused this and how to switch it back to horizontal display.
View 9 Replies View Related