Dell :: Clean Install Vista X64
Mar 25, 2009I just received my 64 bit cd from dell today and am pretty anxious to get it up and running.
Just checking in to see if there are any important things to note before I start.
I just received my 64 bit cd from dell today and am pretty anxious to get it up and running.
Just checking in to see if there are any important things to note before I start.
I got my laptop but did not do a clean install. I just removed all the bloatware I could think of. Is there a guide to do just that though, get rid of all the stuff that shouldn't be there so that you essentially have a clean install without all the bloat or footprints of it?
View 9 Replies View RelatedI decided to hold off on upgrading to Windows 7 on my Studio 1555 but I wanted to perform a clean install of Vista. So I popped in the Vista installation disc that came with the computer, partitioned the hard drive, and installed Vista. Now it is up and running but with a few problems. The problems are; (1)the ethernet controller is not recognized, (2)the intergrated camera is not recognized (when I open Webcam Central is says "Please plug in a supported webcam), and (3) the displays that used to show up when using the brightness and volume function keys no longer appears. I installed all of the drivers on the drivers and utilities disc that came with the computer but these problems are still there.
View 10 Replies View RelatedI just got a studio 1737 and want to do a clean Vista 64 Home premium install.
I was going to follow Les's guide in the main dell forum but it seems media direct 4.0 will not allow me to boot from the cd.
So I want to boot from Vista and reformat and install the OS.
I have a Japanese VGN-Z90NS, and after getting it back from Japan for a minor repair, decided to put Vista Ultimate x64 on there to take advantage of my entire amount of memory.
Some may have seen this thread:
Sony Z HD install and 64bit upgrade problems
On at least the older Vaio Z series (the Z90, Z5xx in the USA, etc.), I have confirmed that the EFI thing is an issue if you try to install a slipstreamed SP1. I happen to have a genuine Vista Ultimate x64 install disc that is RTM, and it installed just fine with no EFI issues.
To get the 64-bit original Sony drivers, download them here or here.
Once you download all of the Sony drivers, download Universal extractor from here, and run it against all of the EXEs you downloaded to strip the model check.
To get the Intel 4500 graphics driver, download it here
NOTE: My Z does not have the built-in camera or fingerprint security, so you'll have to figure that out on your own. Somehow my notebook no longer has bluetooth after being fixed (looking into that ...), so that isn't in this list either. I do have one device that I can't find a driver for, and I bet it's bluetooth since everything else is fine. I'll update if I sort it all out.
Install Process that works:
1. Vista x64
2. Vista x64 service pack (if needed)
3. Intel chipset driver - reboot required
4. Intel Matrix Storage Manager (I have the RAIDed SSDs and definitely need this) - reboot required.......................
Which route should I take for my new SXPS 16 - Clean install Vista from scratch along with all the drivers and programs I want or just uninstall the stuff that I don't want?
View 10 Replies View RelatedI want to do a clean Vista install on the above notebook, and if the time comes, restore the setup (OS) to the default config with minimal effort. Read a lot of threads on how to do this, but just need some help/advice on the following.
Currently the HDD partitioned as:
110MB (EISA Config), FAT16 Pri
10GB, RECOVERY (D:), NTFS Pri
136GB, OS (C:), NTFS Pri Act
2.5GB MEDIADIRECT, FAT32
Discs supplied with laptop: Vista Reinstall DVD, Dell Drivers & Utilities, Roxio, Dell MediaDirect
What I want is to do a clean Vista install to the OS (C:) partition (formatting it), but still keep the other partitions in case I have to resell my notebook. My main concern is not being able to restore the factory image back to C .....
I'm thinking about purchasing windows 7, do i need a clean install of windows vista to upgrade? and also do i need to get all the drivers ect like in the clean install of vista if i wish to upgrade? i have a vaio vgn-fw21L
View 3 Replies View RelatedFriend recently purchased this new laptop, but it's a bit sluggish. i want to do a clean install, but of course there was no Windows Vista DVD provided. How do i create a copy of the Vista installed on this Acer laptop? Does Acer ERecovery spit out a Windows image or does it copy over all the bloat ware as well? Is it hidden in some folder like Lenovos?
View 8 Replies View Relatedif there was a way to do a clean install of Vista (preferably Ultimate 64-bit) on the Vaio Z and have functioning s1/s2 and speed/stamina and Wlan controls. I found the guide for 7, I was wondering if there was something like it for vista, or at least a place where i can get the drivers. My viao Z came with alot of "bloatware", and i'd like to have it snappy.
View 10 Replies View RelatedHas anyone done this on an Acer laptop? I recently bought a 5515 for my parents and after seeing all the bloatware that came on it I figured I'd do a clean OS install. I backed up the CD Key using the ABR utility and backed up all the drivers. I then started the new OS install and get all the way to "completing installation" and it sits there spinning for a good 20-30 mins before it freezes. I tried the 32 bit version first followed by the 64 bit and had no luck either try. I eventually reinstalled the factory settings using the recovery disc.
View 8 Replies View Relatedwhy is my installation of vista freezing on the last step? its either freezing or taking a very long time. its been at the last step for about 20 minutes so far. It did this last time i tried to do a clean install with a dell disc without knowing about installing vista on hp machine with a dell disc. but now i have used vlite and made a anytime upgrade disc and took out the tell stuff according to this tut. the green progress bar isn't moving either. at the bottom of the screen where it says the upgrade may take several hours to complete, my screen doesn't have that.
View 7 Replies View RelatedTHIS IS FOR WINDOWS VISTA 64-BIT ONLY
My system is VGN-AW190.
There are already a couple of "guides" floating around that describe how to install a clean copy of Windows on Sony laptops.
The process is fairly simple and involves installing certain Sony software and drivers in particular order (according to Sony).
For FW series, the guide is here: Official Vaio FW Clean Vista Install Guide
When I first installed Windows Vista Ultimate, I had no problems getting everything to work EXCEPT for the following:
1) CompactFlash (JMicron JMB368 ExpressCard CF) driver is not available on Sony's web site. When inserting the card, it does not show up as a drive in Windows Explorer. After some time playing around, I figured the following 2 ways to make it work:
a. Insert your card, go to device manager and click on "scan for hardware changes"
b. Boot Windows while the card is inserted
2) SD card slot works but is not mapped to any drive. While Ricoh MS driver automatically creates a drive, there is no driver on Sony's web site that would do the same for SD slot.
Sony's support is useless to a point where they told me that the reason why my CF cards do not show up and there is no drive mapped to the slot is because the laptop does not support cards larger than 4GB (and I have only 8GB Sandisk cards) What a joke. I finally managed to get a 2nd tier technical guy on the phone who said that Sony does not provide CF drivers and that there is nothing they can do about it..........
Let me first start by asking your forgiveness if I have stuffed this quick little guide in the wrong spot. I spent a rather brief 10 minutes searching this forum, and I don't believe I am repeating a write-up someone has already done that follows this simple method. If I am incorrect, I ask a moderator to please place this post in its proper home. As you can see, I am not an avid poster here, and I really don't want to be slammed for not searching with enough gusto, etc.
Alright, on to the quick 'n easy...
I have a new VGN-AW235J, so proceed with courage and fortitude if our letters don't match. I found this as I was trying various ways to cleanse this beautiful machine of it's bloatware. It worked for me, and that is all I will claim.
This method requires that you create the restore DVDs.
If you don't have a handful of restore DVDs, go do that now and come back...and while you're up, bring a snack.
One more disclaimer: I didn't take the greatest notes while doing this, so my instructions may be sufficiently vague to cause minor trepidation on the part of the reader. With that being said, each step should be fairly obvious while in front of your machine...DVDs in hand..........................
With all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
Quote:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
I can't install my integrated webcam. After downloading the driver and opening the file installation starts and then suddenly it just ends with the message there was an error during installing.
So the thing I've done are: installing the drivers, which failed.
I've also looked in the device managemer app but could find anything of a camera.
I will try to make this short and understandable......
I bought a XPS M1330 iwth Vista Home Premium Bios A07 in January 2008.
April 2008 I tried to install updates and it messed up my Microsoft Office 2007 so I got it back working and did not mess with anymore updates.
Around June 2008 I started having the notorious battery issues. The battery ran down while I was on it and the battery has never worked since. At first it said connected,
but not charging but then it eventually died while I was trying to fix the problem and now it says battery not detected and it says the ac adapter is not recognized (I have the original AC adapter sent with the computer) .....
Doing a clean install of Vista and keep getting prompted to locate and install driver for "Coprocessor". Have looked in device manager (yellow mark) but I just don't know what it is. Windows says it can't locate software for it.
Don't know what I am looking for on Acers site under drivers, installed all other stuff OK, Realtek, NVidia etc. Could it be a modem driver. Properties in device manager give no clues, it's listed as "other devices" along with the webcam which I have to sort drivers out for too.
I have been told that Dell laptops have a hidden partition to do a factory re install of the OS.
View 3 Replies View RelatedThis is the new notebook I am looking at - The Dell Studio S1555-018B - it looks pretty nice, and I am strongly considering purchasing it
I have a few questions regarding a clean install ..........
Im running vista 64 home premium and want to use my upgrade discs to get to win 7.
If i want to delete the recovery partition when do i do it? Is the best process to back up my files and then do a recovery back to vistas original state when i first got the machine and them delete the recovery partition?
Then put in the win7 upgrade dvd? Can i merge the recovery partition with the main one in vista after to delete it?
Upon receiving my new Latitude XT2, per the usual, I'd like to perform a clean install of Windows Vista Business.
However, with Dell's ControlPoint software, I'm unsure of the best way to do this.
Those of you with a new Latitude, how did you go about a clean install? More specifically, how did you handle the Dell Control Point software?
Also, what exactly is "Control Vault" and what is it used for?
How well will the E6400 work without the dell DCP software installed. I've had the E6400 only two weeks and thinking of wiping the OS and installing Win 7 again with only the necessary drivers, without all the Dell software. The machine was using over 3.1 gigs of RAM yesterday and there was NOTHING running on the taskbar. Looked at the process list and there was no one process that was consuming my RAM, I was getting nickel and dimed by all the processes that are running. DCP seemed to be a big consumer as well as CPU time.
TIA
I ordered one a few days ago and opted out of getting an antivirus as well as any microsoft office products.
That being said, do you guys think a clean install of vista is necessary on a new SXPS 16?
If it is, is following this http://support.dell.com/support/topi...t?docid=339949 a good way of doing it?
I’m thinking of doing a clean install on my M1530, and im just trying to decide which options to go for, and which not to.
I will be installing Vista Ultimate. I mainly use the computer for internet surfing, watching films, using Microsoft office, and gaming (Fallout 3, Call of Duty 4 etc.).
The main things I am trying to decide are:
Should I install Mediadirect?
As far as I can see the only advantage of this is getting slightly more (can anyone confirm how much?) battery life whilst watching films on the go. I mainly watch films whilst connected to power, but this could be useful in the future.32 or 64 bit?
I have previously been running 32 bit, but would be more than happy to jump on the 64 bit bandwagon, as I have heard that it’s slightly snappier, and also my 4 gigs of ram would be put to full use. Would there be any compatibility issues with any of my games etc? Would appreciate some info on this. It could lead on to...Dual-boot?
Could have vista 32 and 64 dual booted? Or another thing that took my fancy was perhaps throwing on opensuse? I’m going to open a new thread regarding the battery life etc that this would give to try and decide if its for me,
friends how to do a clean install..i installed using the os dvd they have given me but there is still the windows.
View 3 Replies View RelatedDell is sending me a replacement SXPS16 (the 4th one. The previous 3 have been SXPS13's that have all been defective).
I genuinely hated all the bloatware on the 13's, so would you guys advise doing a fresh install on the 16?
The computer comes with the proper disc to do that, right?
I am concerned, however, as to the shear amount of Dell apps that are pre installed on the 1640 boot partition. I want to keep the dock for ex. ..I know from experience the order in what is installed as well as what is on my utlis disc is important. So-
1. Has anyone already done this install? Would LOVE your feedback.
2.If not what is the consensus in this forum for such an install. ie order of drivers,etc.
I have a Studio 15 (1535) and did a clean install with Windows 7 (32 bit) and now I'm in the process of reinstalling my programs.
I used Windows 7 Easy Transfer so I can keep track on what needs to be installed and boy this program is slick.
I didn't install all the Dell software that came with the computer but selected what I wanted
Considering doing a clean install of XP Pro on my Windows partition in order to purge my E6400 of all the Dell and other party bloatware and start from scratch.
View 7 Replies View Related