I got my laptop but did not do a clean install. I just removed all the bloatware I could think of. Is there a guide to do just that though, get rid of all the stuff that shouldn't be there so that you essentially have a clean install without all the bloat or footprints of it?
Doing a clean install of Vista and keep getting prompted to locate and install driver for "Coprocessor". Have looked in device manager (yellow mark) but I just don't know what it is. Windows says it can't locate software for it.
Don't know what I am looking for on Acers site under drivers, installed all other stuff OK, Realtek, NVidia etc. Could it be a modem driver. Properties in device manager give no clues, it's listed as "other devices" along with the webcam which I have to sort drivers out for too.
Im running vista 64 home premium and want to use my upgrade discs to get to win 7.
If i want to delete the recovery partition when do i do it? Is the best process to back up my files and then do a recovery back to vistas original state when i first got the machine and them delete the recovery partition?
Then put in the win7 upgrade dvd? Can i merge the recovery partition with the main one in vista after to delete it?
How well will the E6400 work without the dell DCP software installed. I've had the E6400 only two weeks and thinking of wiping the OS and installing Win 7 again with only the necessary drivers, without all the Dell software. The machine was using over 3.1 gigs of RAM yesterday and there was NOTHING running on the taskbar. Looked at the process list and there was no one process that was consuming my RAM, I was getting nickel and dimed by all the processes that are running. DCP seemed to be a big consumer as well as CPU time.
Iím thinking of doing a clean install on my M1530, and im just trying to decide which options to go for, and which not to.
I will be installing Vista Ultimate. I mainly use the computer for internet surfing, watching films, using Microsoft office, and gaming (Fallout 3, Call of Duty 4 etc.).
The main things I am trying to decide are:
Should I install Mediadirect?
As far as I can see the only advantage of this is getting slightly more (can anyone confirm how much?) battery life whilst watching films on the go. I mainly watch films whilst connected to power, but this could be useful in the future.32 or 64 bit?
I have previously been running 32 bit, but would be more than happy to jump on the 64 bit bandwagon, as I have heard that itís slightly snappier, and also my 4 gigs of ram would be put to full use. Would there be any compatibility issues with any of my games etc? Would appreciate some info on this. It could lead on to...Dual-boot?
Could have vista 32 and 64 dual booted? Or another thing that took my fancy was perhaps throwing on opensuse? Iím going to open a new thread regarding the battery life etc that this would give to try and decide if its for me,
I am concerned, however, as to the shear amount of Dell apps that are pre installed on the 1640 boot partition. I want to keep the dock for ex. ..I know from experience the order in what is installed as well as what is on my utlis disc is important. So-
1. Has anyone already done this install? Would LOVE your feedback. 2.If not what is the consensus in this forum for such an install. ie order of drivers,etc.
I'm not pleased with some of the bloatware the laptop shipped with, so I just wanted to make sure that I can clean install from the "Reinstallation DVD" my computer came with. The product key isn't on the disc but it does seem to be on a sticker on the bottom of the notebook. Am I safe in doing this? I've already backed up all my files...
I'm installing a Western Digital Scorpio Black WD3200BEKT 320GB 7200 RPM SATA 3.0Gb/s Notebook Hard Drive into my E1705.
Yesterday, I pulled the old drive and put the WD into the bay, booted from Windows MCE CD, Windows installed files, rebooted and went to the GUI install screen. I tried to install 5 times and every time I would get the infamous 33/34 minute hang up.
I've read that this is usually due to the install media being corrupted, or Windows not being able to install a piece of hardware. So I also tried my second, never before used Windows MCE install disk (Dell had sent me two copies). That produced the same results.
My only conclusion is one of two possibilities. One, I just got a bum hard drive. I already have a replacement drive on the way from newegg to cover that base. Two, I read that some copies of OEM operating system disks will not install with certain changes in hardware. Anyone heard of this? Is our copies of Dell Windows MCE stripped down in some way? Is it possible that our copy of Dell Windows would not recognize a WD hard drive?
Would seem really strange that a simple change in hard drive, especially considering Dell designed the bay to be plug-n-play upgradeable, would prevent a clean install of Windows.
The notebook comes with an restore disc, but I really would like to have a simple and clean Win8 install, without any unecessary pre-installed stuff and separate partitions for system and personal data.
Can I make a clean installation of Windows 8 on my new Inspiron 15R SE? Does it affect warranty?
Do I need a product key or is it attached to the BIOS and will not be asked when installing from a disc?¬†The drivers on Dell website will keep the SSD mSata and AMD Commutable Graphics working properly or will I need some Dell software to make it happen?
I¬†recently¬†purchased a Dell Inspiron 14z Ultrabook. I am looking to do a clean install of Windows 7 Home Premium. I am attempting to boot the installer from a USB drive and keep getting the error:
"A required CD/DVD drive device driver is missing. If you have a floppy disk,¬†CD, DVD, or USB flash Drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD Drive, you can safely remove it for this step."
This is also my first time working with a computer that has an SSD drive in addition to the main hard drive. Is there anything special that needs to be done when doing a clean install in regards to the SSD? I just want to make sure that I will be able to get the SSD operating the same way as it currently is.¬†
I just finished doing a clean install of Vista SP1 on my new Studio 1537. Everything has gone well, however when I checked Device Manager I have one device with an exclamation mark next to it. When I clicked on the unknown device properties it tells me that it is "Intel(R) ICH9M LPC Interface Controller - 2919" I've looked all over Dell's Driver and Download site and I can't find the driver for this device nor do I know what category I should look under. When I contacted Dell's support they wanted me to unistall the device and overwrite my current BIOS version, A07, with an older version, A05. I decided that wasn't the best way so I thought I'd ask here hoping someone could help. After my install I loaded the drivers in the following order per Dell's directions: Notebook System Software, Chipset, Audio, Video, NIC Card, Dell Quickset, Wireless NIC, Touchpad. I didn't download and install the SATA drivers from Dell's website because my drive model isn't one of the ones listed for use with the driver. My drive is listed as a ST9320320AS. I'd appreciate any help someone can offer.
I am getting my win7 upgrade disc tomorrow for my studio 1555, and I was wondering a few things before I carry out my clean install.
First, with regards to drivers, there do not seem to be drivers for everything on the dell win7 driver page (nothing for bluetooth, system utilities, etc.). I have downloaded everything relevant to my computer, but where can I find the rest of the drivers I need? Also, what order should I be installing them?
Second question is in regards to the recovery partition. Is there any point keeping it? I have heard various things about whether it will or won't work after installing windows 7
I got my Dell Windows disk yesterday and I would like to do a clean install. I would like to do 2 partitions....
one for the OS at 150 GB and the remaining space in another partition for things like music, pictures, movies....etc.
I was able to delete all the partitions that originally came with the 1555 so that there is one big Disk O Unallocated Space.
I then clicked new to make a partition for the OS. I set it to be 150 GB when I did this it also created another partition at 100 MB. So now I have:
Disk 0 Partition 1: System Reserved Total Size 100 MB Free Space 86 MB Type System Disk 0 Partition 2 Total Size 146.4 GB Free Space 146.4 GB Type Primary Disk 0 Unallocated Space Total Size 319.3 GB Free Space 319.3 Gb .....
I decided to try and do the whole clean install thing with my SXPS 13 today and - well, now I'm completely freaked out and regret it completely. I kind of wish I was warned it wouldn't be so simple for a newbie laptop user, because this has been the most computer-related stress I've had in my entire life. Now I feel like I've permanently wrecked my new $1500 laptop because I have no clue what to do about the huge mistake I've made.
First of all, it seems to me like my entire computer has slown down. I downloaded iTunes on the original install within a minute or two; now, it takes 15 minutes. Internet pages come up slower than before it seems to. (I had some issues at first installing the driver for the wireless thing)
I did put the Dell Driver disc in, of course; I was so freaked out I went through everything I could, extracted then installed, because I didn't know what was supposed to go on and what wasn't (it didn't let me download drivers for things I didn't have, of course).
When I first started it up, Windows new rating for my computer was 1.0. I made it do it again, and it went up (5.3), fortunately, but it can't help but make me think what else I might be missing.
Another red flag is that when I go back to the Dell Driver disc, and I try to install something to see if I already did it, it asks if I would like to "create" the file as nothing existed their before. As I was 90% sure I did install it once before, I tried it with one I new I installed. It went through as if I never installed it, so I'm afraid if every time I restart my computer isn't going to work unless I take the time to reinstall every driver.
There has to be something huge I'm missing here. If anyone can think of anything, please let me know. Also, please let me know if anyone knows of a guide to the clean install on this computer (I already looked at Microsoft's Vista Clean Install guide, obviously that doesn't fix all the Dell driver problems) .....