I have an xpsm1210 laptop which came with dell recovery partition but which I erased shortly after I got it. I wish I hadn't
I also have an xps m1530 laptop which has all its partition as set up by dell.
I am going to replace the hard drive in my m1210 laptop with a bigger one - the same size as the one in my m1530 laptop - 320 Gb
I'm having a problem to install windows 7 pro on my Lenovo t440s ( that came with windows 8 ) using a memory stick.I went to the windows 7 installation menu and formatted the Windows 8 partition, so now I have :
Disk 0 Partition 1: WINRE_DRVÂ 1GBÂ OEM
Disk 0 Partition 2 : System_DRVÂ 260MBÂ System
Disk 0 Partition 3Â 128MBÂ MSR
Disk 0 Unnallocated Space 225GB ( it was the old windows 8 partition )
Disk 0 Partition 4: Lenovo_Recory 12.1GB OEMÂ
However, when i try to use the free space to install the windows 7 i get this error :" Windows cannot be installed to this disk. The selected disk is of the GPT partitions style. "Â
I tried to bot using Legacy Boot Only and after using UEFI/Legacy Boot and nothing changed, I'm still receiving the same error.I read that I have to select each of the partitions on the drive, and select Delete. Then the drive will show a single area of unallocated space that I should use to install windows.there is any problem in delete all my partitions of Lenovo T440s? Can I delete the OEM partitions?
I want to clone my current laptop’s Seagate Momentus ST9200420ASG using a ST9250421ASG.
I want the target drive to have all the original 4 partitions my source drive has:
http://forum.notebookreview.com/atta...1&d=1243812018
I finally bought my Z series and trying to clone my HDD to my SSD using Acronis True Image with the SSD being on the outside of the computer using USB.
When it reached 80%, everything shut down as If the computer went into standby mode with the power light intermittenly turning amber. I turned it on again manually but the screen stayed blank. So I have to redo the whole cloning process again. it happened 2x already?
My Thinkpad never really went into sleep mode during cloning.
I have a 2006 macbook pro 17". I want to upgrade the 120GB hard drive with a 500 GB drive. I normally use ghost on my PC to clone hard drives from laptops. Is there a Windows program that will allow my to clone an OSX drive from one hard drive to another?
View 6 Replies View RelatedHas any one successfully cloned their hard drive when it's encrypted using HPs Protect Tools either when using the TPM or Software Tocen only?
View 6 Replies View RelatedI will probably re-switch on MAC Laptop soon ( last time I owned a G3) and was wondering if things have changed since then....:
What I do with my windows machine :
I use Acronis True Image to build an image of the OS partition along with software ( except data stored in a different partition) and save it in two different places, one of them an external USB drive.
In case of virus/driver problem/damaged OS but still bootable, I recover from the image right trough the Acronis software installed on windows.
If the OS is not bootable, I can use the Bootable Rescue CD that I can build with the same software, boot the PC with it and voila'...
I remember in G3 days I used Carbon Copy Cloner to save -not "images"- but snapshot of the OS partition to external drive and eventually recover the main OS partition booting from it, just in case. Can it still be done in Intel/Leopard days?
I also remember that the external boot could be performed only from a firewire drive, is it still this way, or can I use a normal USB drive ( HPS+ formatted)?
And, last question : is the 800 Fw physical port compatible with a 400? ( can I plug my M-Audio Firewire audio device straight to a MBP with a normal FW cable?)
I want to upgrade my S230u with the 500GB HDD to a 7mm 2,5" 480GB SSD (Corsair Force GS 480GB SATA3).
Â
I am wondering how can I later on clone my OS from the HDD to SSD? Is it possible to plug the SSD in over USB, use some tool to clone the entire disk (including the recovery partition) and then simply switch to SSD?
Â
Also, once I do that, how do I disable express cache and ideally disable using the built-in 24GB SSD? I am not interested in IRST as I tend to use hibernation a lot.
here's a topic I am getting confused on, after reading many different things, so I want to ask about this here.
I understand that many PC sellers like Dell put hidden partitions on new PCs for various functions. Originally I thought that my new Dell would have something related to a "recovery" partition to reset the PC back to factory installs.
But after reading more and more I think that is only part of the puzzle, that there may possibly be at least 3 different types of hidden partitions.
I just go a new harddrive that I wanted to install as my primary HD. Its a Western Digital 320GB 7200rpd drive.
My question is since I will be reinstalling Vista and all the other programs, how do I recreate the Recovery partition that is on my current HD.
Thanks again. As far as backing up things, I have a 2nd HD bay where I have a 500GB installed for all my saved music videos, files ect so its not a problem
I have the Precision M6500, and before the Windows 7 partition there are two smaller partitions that I don't want or need. I will install from the DVD if I need to reinstall it and I use Acronis to do full image backups.
So I started up with changing the active partition from one of those recovery partitions. Suddenly I get the "BOOTMGR missing" pain in the a$$. No problem to fix it of course, I use a Linux Partition Manager boot CD for that.
But the problem is that if it reacts that badly to that change (I even tried the original Windows 7 DVD to startup repair, fixboot and fixmbr, but it didn't help),
then I fear that removing those partitions all together will really mess things up. Can I force the Windows 7 bootmanager over to the OS partition, or is this some custom Dell stuff that means that I would have to reinstall 7 totally to get it fixed?
I have to extend my C: partition because it's becoming to small (I'll use gParted for that), so I figure I can use the opportunity to get something done about that awful MediaDirect 3.5 too.
Right now I have four partitions on my hard disc: a 47 MB partition, then C:, then D:, then a 2 GB partition. I figure the first and the last are used for MediaDirect 3.5.
Could I just uninstall MediaDirect 3.5 from within Vista, then install MediaDirect 4.0, then repartition my hard disc including deleting the 2 MD partitions? Is this all secure when it comes to the scary "home" button?
Oh, and btw: I need MediaDirect 4.0! Is there some way to get it? Do I have to convince someone from Dell to send it to me?
(And if I DON'T get MD 4.0 could I somehow re-route the "Home" button, and still safely get rid of those 2 MD partitions?)
I'm trying to install Win7B, and the main problem is that I already have four partitions on my HDD and it won't let me create any more.
There's the main C:/Drive, then the three Dell ones: Recovery, and two blank ones that (after some googling) I believe are for diagnostics and DellMediaDirect .....
I just bought a Dell Inspiron 17 with a 350 GB HDD. It is partitioned into C: and D: drives.
The C: drive has about 50 GB and the D: about 300 GB. All of the user files are in the smaller C: drive.
1. Wouldn't it be better to have the user files in the larger side?
2. Can this be changed?
3. What do you recommend?
I would like to create a dual-boot Vista and Ubuntu on Dell Studio XPS 13. When I tried to partition the hard disk, I found that there are Dell Utility and Recovery partitions.
What are these partitions? Is it safe to delete them? If I delete them, can I restore them back again? How can I backup, if possible, these partitions to CD or DVD before deleting them
So Dell has taken up two partitions.
1) around 10GB for the factory image
2) around 200MB for something else which I dont know...
I have another windows partition
so that makes 3 primary partitions.
But now I wanna install linux , but I don't want to loose the factory image ( so that i can do a manual restore later on )....
I want to run dual boot with windows 7 and ubuntu. The problem is that i already got 4 primary partitions, even tho I only use one myself.
One partition is an OEM partition of 39 mb. One is at 797 kb, and I have totally no clue what this partitions is for. Ive tried googling for hours, but I cant find anything. And then I have the 100 mb partitions created by windows 7.
What of those partitions can I delete? All of them? And do anyone know what the 797 kb dynamic data partition is?
I think I know the answer to this but I just wanted to confirm.
I'm installing Windows7 RC on my Dell Studio, and during the part where you choose the installation location I'm seeing 3 partitions.
The 139GB main one, the Recovery partition, and one called 'OEM' that's 39MB. I left it alone and formatted then installed on the main 139GB partition but I'm wondering about the 39MB one
Just got my Dell Windows 8 laptop and looking at disk management I can see 4 partitions in there in addition to the one containing the OS. See image below.
View 2 Replies View RelatedI have a Dell XPS m1210. I am thinking about an SSD harddrive. Win XP is a must. I am looking at the gskill titans on newegg.
I am currently running with the 60GB stick drive. What I would like to do is ghost it over and just benefit from SSD speed.
Is this possible? Are SSDs even compatible with the m1210? I know they change the HD specs every few months or so (IDE, SATA, SATA-2, etc
I am getting my win7 upgrade disc tomorrow for my studio 1555, and I was wondering a few things before I carry out my clean install.
First, with regards to drivers, there do not seem to be drivers for everything on the dell win7 driver page (nothing for bluetooth, system utilities, etc.). I have downloaded everything relevant to my computer, but where can I find the rest of the drivers I need? Also, what order should I be installing them?
Second question is in regards to the recovery partition. Is there any point keeping it? I have heard various things about whether it will or won't work after installing windows 7
I have a Dell Inspiron 1525 with pre-installed Windows Vista Home Basic. In my disk, I have already have 4 partitions, os, recovery, EISA configuration and a no name, drive letter 2.50GB partition. I want to create a new partition to store my private data. From pcworld tutorial
(http://www.pcworld.com/article/13207...in_vista.html), I made an unallocated space. However, I can't make it into a new simple volume. Windows says I have already reached maximum number of partitions allowed.
i bought a new hard drive, and it has a load of space i will not use, so was thinking of adding both the recovery partition and diagnostics partition, But have some questions of how i would even do that. First, what would i do, just create a couple of blank partitions?
View 5 Replies View RelatedI'm used to using Windows Backup to create a system image, in case I have a hard drive failure, so I can return my computer to a certain state.
I have not been able to create a system image on my 15Z with Windows Backup - it fails every time. So I purchased Acronis True Image 2013, but I don't know which partitions to back up to get the equivalent of a system image in Windows Backup.
Here is how my computer was set up by Dell:
Disk 0 : 8.00 Gb Unnamed primary partition
Disk 1 :Â 500 Mb ESP partition FAT32, 40 Mb DIAGS partition FAT32, 500 Mb WINRETOOLS partition NFTS, 453 C: partition NFTS, and 12 Gb PBRÂ partiton NFTS
I have a Dell Latitude E6410. I recently installed created a linux partition on my HDD but was not interested in keeping it. Anyway after I uninstalled this OS, the space allocated to it on the HDD was turned into unallocated space. I have been unable to merge it with my primary partition. What I wanted to ask was that if I perform a reinstall of my original OS(Windows 7 Professional), will I be able to recover the original partitions and how can it be done?
View 1 Replies View RelatedSo I got my Dell XPS M1210 way back at the start of 2007. It served me faithfully up until last week when it died. Basically when I turn it on I can hear the hard drive spinning up and the power light comes on but nothing else, not even the hard drive access light. I'm pretty certain either the motherboard or CPU(or both) are fried. I can see that the CPU fan is not spinning when I turn the laptop on. I disassembled the laptop and gave it a good cleaning, something I probably should of done long ago. The exhaust hole for the CPU fan was nearly totally clogged with dust which is the reason why I think something is fried (Also the temps had been a lot higher than normal the last few weeks). Anyway some questions you guys might be able to help with:
- Should I bother replacing the motherboard or would it just make more sense financially to get a new netbook of some sort?
- Any other suggestions on what I can try to fix the problem?
- Is there anything of practical use I can salvage from my m1210 besides the hard drive?
I have been using my Dell XPS M1210 for 2.5 years now. It has been a great laptop, only big issue has been a dying battery which is something that has occurred to most close friends that own the same model. Recently, my laptop shut down on its own. After this occurred, it wouldn't start up again. When I hit the power button, no sound comes out of the computer. There is no noticeable hard drive spin, fan noise or anything. The screen does not flicker or show any sign of life. The power LED shines for 5 seconds and then goes down.
I tried FN+Power button to no success. Also, if I leave the power button pushed down, the power LED flashes after 5 seconds and continues to stay on until the next 5 seconds doing a cycle that only ends once I stop pushing the button. I tested my battery on another XPS M1210 and it worked well. Also, I tested another battery on my XPS and it did the same thing.
I am currently out of warranty. I don't know what to do to test the failing component. Since I don't know what the specific problem could be, I don't know how much a repair could end up being.
My XPS M1210 laptop is dead right now. It happened last friday morning when I am trying to turn on the laptop. After I press the power button, the hard drive sounds spinning, but after a second, it remains silent (Same for the cd-rom). Only the power led is on.
All other leds are dead, not even the bluetooth, cap led, number lock led. So I connected my laptop to a external monitor, but nothing is showed. I have inserted a boot disk, but it doesn't work. I also tried to press Fn and power button method, but it still doesn't work as well.
Right now, I am suspecting my hard drive is broken or some virus infected my laptop because a day before my laptop is still working, my laptop got infected with some virus.
When I opened my inbox, my laptop suddenly got out of control. The cursor jumped around the screen and there was some bar code surrounded the cursor. But after I restarted my comp and did some virus scan, nothing was found. However, the next day, I turned on my laptop, the screen/images were all messed up. The images were chopped into piece. But in safemode, things are looking perfect. So I shutted it down and planned to reformat the laptop. AFter that, I am not able to turn it on again.
I wanna get rid of my inspiron 9100 and carry around something smaller. I've currently got the mr9800 video card and do some low detail gaming (mostly old games...BFV, BF1942 demo, WoW). I do need to use it for Second Life as part of my job. I also do presentations and stuff for work.
The cost/benefit ratio of lugging this thing around in comparison to its performance is waning. I've been thinking of forgetting the whole desktop replacement thing and take a cut in gaming performance for portability. The portable computers are getting to a point that even with low end graphics card they are comparable to my 9100 with the mr9800 (almost).
I've been looking at the m1210 with keen interest...it's pretty compact and cool. But, I've read the extensive thread about complaints related to the screen. If I went with the m1210 I'd be getting the AV package in hopse of the AUO screen which is supposed to be marginally better.
I've also been looking at the m1330 because of the LCD screen...it's a little bigger, but lighter. It's also about a thousand dollars more expensive (decked out with a decent screen, video card, blue tooth, etc.).
When all is said and done I'm looking at nearly identical specs, except for the LCD screen, the fingerprint doohickey, and the new dx10 capable video card. And, like I said, the m1330 is bigger, but lighter. In your opinion, is it worth it? Bear in mind that if I went with the m1330 I'd have to wait until there was some sort of coupon/sale or it turns up in the outlet...cause I can't drop 2,000 on it. I'm looking at 1200 tops. The m1210 is available decked out for 1100 (including tax). I'm just a little nervouse about the LCD problems...and the older technology.
I initially bought a m1210 dell laptop without the integrated camera option. I recently purchased a new cover for my laptop (the old one cracked.) this time it included the camera.
I installed everything together and it all looks fine But Im not sure If Im actually able to plug the cord for the camera anywhere.
