I have to extend my C: partition because it's becoming to small (I'll use gParted for that), so I figure I can use the opportunity to get something done about that awful MediaDirect 3.5 too.
Right now I have four partitions on my hard disc: a 47 MB partition, then C:, then D:, then a 2 GB partition. I figure the first and the last are used for MediaDirect 3.5.
Could I just uninstall MediaDirect 3.5 from within Vista, then install MediaDirect 4.0, then repartition my hard disc including deleting the 2 MD partitions? Is this all secure when it comes to the scary "home" button?
Oh, and btw: I need MediaDirect 4.0! Is there some way to get it? Do I have to convince someone from Dell to send it to me?
(And if I DON'T get MD 4.0 could I somehow re-route the "Home" button, and still safely get rid of those 2 MD partitions?)
I'm having a problem to install windows 7 pro on my Lenovo t440s ( that came with windows 8 ) using a memory stick.I went to the windows 7 installation menu and formatted the Windows 8 partition, so now I have :
Disk 0 Partition 1: WINRE_DRV 1GB OEM Disk 0 Partition 2 : System_DRV 260MB System Disk 0 Partition 3 128MB MSR Disk 0 Unnallocated Space 225GB ( it was the old windows 8 partition ) Disk 0 Partition 4: Lenovo_Recory 12.1GB OEM
However, when i try to use the free space to install the windows 7 i get this error :" Windows cannot be installed to this disk. The selected disk is of the GPT partitions style. "
I tried to bot using Legacy Boot Only and after using UEFI/Legacy Boot and nothing changed, I'm still receiving the same error.I read that I have to select each of the partitions on the drive, and select Delete. Then the drive will show a single area of unallocated space that I should use to install windows.there is any problem in delete all my partitions of Lenovo T440s? Can I delete the OEM partitions?
I have installed the win 7 on Dell M1330, everything was right.
Then I occasionaly pressed the "Mediadirect" button instead of Power... the mediadirect was started and it seems it's crashed MBR.
fdisk shows: - 2 old partitions now. They were C: and D: before "Mediadirect" button was pressed (now these 2 partitions are shown without letters); - Mediadirect partition, which became C: This partition is active now.
I am trying to totally remove MediaDirect 3 from my laptop, and I can't seem to get it all the way off.
First, I press the MediaDirect button while the laptop is powered off to boot into the MediaDirect partition. This makes the "hidden" MediaDirect partition visible to my disk manager program - so I can delete it .....
Is it possible to install the MD version available in the Studio (4, I believe) in M1530? It certainly looks better.
Also, are there any new fixes for anything in M1530? I remember downloading a new optiarc dvd driver and it fixed some sound issues. Any new drivers (maybe from other dell sections) could help improve my M1530 performance?
My issue is playing Blu-Ray Discs. I put the disc in, and the program automatically initiates.
After a while though just as its doing the the loading green circle thing the program abruptly terminates.
I have no idea why it does this. When I start the program back up manually and tell it to play the BD movie, it just says "Unable to detect a DVD or a DVD device on your computer.
I installed Windows Vista and Windows 7 to dual boot. I deleted the MediaDirect partition. Using this guide, what is the path to boot an OS? Or is there a better alternative?
I have a dell XPS m1530, and because I am pretty sure I had a virus that my antivirus software could not pick up I reinstalled Vista.
I ended up reformatting the partition it was on before installing over, I also reformatted the recovery partition. But, apparently XPS system comes with a MediaDirect partition that I was unable to reformat (the windows set up did not let me do this).
I am wondering now if it's possible for the virus to have lived through the reformat in the MediaDirect partition. If so, how can I reformat that partition?
here's a topic I am getting confused on, after reading many different things, so I want to ask about this here.
I understand that many PC sellers like Dell put hidden partitions on new PCs for various functions. Originally I thought that my new Dell would have something related to a "recovery" partition to reset the PC back to factory installs.
But after reading more and more I think that is only part of the puzzle, that there may possibly be at least 3 different types of hidden partitions.
I just go a new harddrive that I wanted to install as my primary HD. Its a Western Digital 320GB 7200rpd drive.
My question is since I will be reinstalling Vista and all the other programs, how do I recreate the Recovery partition that is on my current HD.
Thanks again. As far as backing up things, I have a 2nd HD bay where I have a 500GB installed for all my saved music videos, files ect so its not a problem
I have the Precision M6500, and before the Windows 7 partition there are two smaller partitions that I don't want or need. I will install from the DVD if I need to reinstall it and I use Acronis to do full image backups.
So I started up with changing the active partition from one of those recovery partitions. Suddenly I get the "BOOTMGR missing" pain in the a$$. No problem to fix it of course, I use a Linux Partition Manager boot CD for that.
But the problem is that if it reacts that badly to that change (I even tried the original Windows 7 DVD to startup repair, fixboot and fixmbr, but it didn't help),
then I fear that removing those partitions all together will really mess things up. Can I force the Windows 7 bootmanager over to the OS partition, or is this some custom Dell stuff that means that I would have to reinstall 7 totally to get it fixed?
I'm trying to install Win7B, and the main problem is that I already have four partitions on my HDD and it won't let me create any more.
There's the main C:/Drive, then the three Dell ones: Recovery, and two blank ones that (after some googling) I believe are for diagnostics and DellMediaDirect .....
I would like to create a dual-boot Vista and Ubuntu on Dell Studio XPS 13. When I tried to partition the hard disk, I found that there are Dell Utility and Recovery partitions.
What are these partitions? Is it safe to delete them? If I delete them, can I restore them back again? How can I backup, if possible, these partitions to CD or DVD before deleting them
I want to run dual boot with windows 7 and ubuntu. The problem is that i already got 4 primary partitions, even tho I only use one myself.
One partition is an OEM partition of 39 mb. One is at 797 kb, and I have totally no clue what this partitions is for. Ive tried googling for hours, but I cant find anything. And then I have the 100 mb partitions created by windows 7.
What of those partitions can I delete? All of them? And do anyone know what the 797 kb dynamic data partition is?
I think I know the answer to this but I just wanted to confirm. I'm installing Windows7 RC on my Dell Studio, and during the part where you choose the installation location I'm seeing 3 partitions.
The 139GB main one, the Recovery partition, and one called 'OEM' that's 39MB. I left it alone and formatted then installed on the main 139GB partition but I'm wondering about the 39MB one
Just got my Dell Windows 8 laptop and looking at disk management I can see 4 partitions in there in addition to the one containing the OS. See image below.
I am getting my win7 upgrade disc tomorrow for my studio 1555, and I was wondering a few things before I carry out my clean install.
First, with regards to drivers, there do not seem to be drivers for everything on the dell win7 driver page (nothing for bluetooth, system utilities, etc.). I have downloaded everything relevant to my computer, but where can I find the rest of the drivers I need? Also, what order should I be installing them?
Second question is in regards to the recovery partition. Is there any point keeping it? I have heard various things about whether it will or won't work after installing windows 7
I have a Dell Inspiron 1525 with pre-installed Windows Vista Home Basic. In my disk, I have already have 4 partitions, os, recovery, EISA configuration and a no name, drive letter 2.50GB partition. I want to create a new partition to store my private data. From pcworld tutorial
(http://www.pcworld.com/article/13207...in_vista.html), I made an unallocated space. However, I can't make it into a new simple volume. Windows says I have already reached maximum number of partitions allowed.
i bought a new hard drive, and it has a load of space i will not use, so was thinking of adding both the recovery partition and diagnostics partition, But have some questions of how i would even do that. First, what would i do, just create a couple of blank partitions?
I'm used to using Windows Backup to create a system image, in case I have a hard drive failure, so I can return my computer to a certain state.
I have not been able to create a system image on my 15Z with Windows Backup - it fails every time. So I purchased Acronis True Image 2013, but I don't know which partitions to back up to get the equivalent of a system image in Windows Backup.
I have a Dell Latitude E6410. I recently installed created a linux partition on my HDD but was not interested in keeping it. Anyway after I uninstalled this OS, the space allocated to it on the HDD was turned into unallocated space. I have been unable to merge it with my primary partition. What I wanted to ask was that if I perform a reinstall of my original OS(Windows 7 Professional), will I be able to recover the original partitions and how can it be done?
I had a quick look at Disk Management on my new Vostro 5470, and there are not less than 7 partitions displayed over there.
The laptop has a SSD of 128GB installed. I know that GPT hard drives require several partitions (to be specific, I know only about ESP, MSR and data partitions only) - but 7? My data partition has only 99GB available. That surely isn't a lot.
I know that some sort of Intel recovery is installed, and I know that the Dell diagnostics is installed somewhere too.
I have a hard drive of 500 GB on windows vista ultimate. When I installed vista on it I forgot to make 2 partitions so I made a 500 gb partition, which i don't like. I had ~80 GB used out of 500. Using vista's computer management I've managed to create a partition of ~140 GB, from the free space of the 500 GB partiton. I don't understand why it won't let me create a 350 GB partition, since there was about 400 GB free... Anyway, now I have a 300 GB partition with 100 GB used and windows vista ultimate on it and a 140 GB partition with 50 GB used. How can I make the windows partition of 150 GB and the second one from 140 into ~300 without having to reinstall windows / format ? Vista's computer management doesn't let me do this, i don't know why exactly.
I use latitude E5530 Now, which have two hidden partition, one is no name, and it is 39MB and it have 100% space didn't use, ( OEM partition). Another one is called Recovery and it as 752MB and it is NTFS format and in the brackets it says system, active, main partition.
So what is the function of those two partition?
Can I delete the recovery partition? cause I need change a hard drive and I will made a recovery image.