I found a E6400 in my local store that's $1500 (which is way too much) with a NVIDIA Quadro NVS 160M, does that graphics card is the reason why it's so expensive, other than being a C2D P9500 with 4gb ram?
I really don't care about dedicated graphics card, as my current x3100 suffices. And I don't game, expect rarely BF2, which is fine with the x3100
I feel E6400 w/ Nvidia has big design flaw w/ Heat! I had hopes Bios A15 would fix some of it.
Even though I used RMClock to reduce the voltage (it did drop 5-7C), the left side vent of the laptop blows VERY hot air out ALL THE TIME!! My graphic cards on a fresh boot starts at 58C and goes up to 68-70C w/ normal web usage (not even games).
By using Antec Cooler (No choice otherwise, which makes enough fan noise & feels much heavier) + laptop fans noise.. it feels like a desktop, rather than sleek and quiet notebook. Becuase of this fans noise + Heat I don't tend to use my laptop much often. My Dell XPS 720 desktop is much quieter to use. I felt previous D620/D630 were much better when controlling the heat.
I have a Dell E6400. Â The OS has been uprgraded to Windows 7 - 64 bit by an authorized Microsoft refurbish dealer. Â The driver stops randomly. Using the internet, Office, version 2010. Â is there a better driver?
View 1 Replies View RelatedI have an InspironR Special Edition 7520 and my AMD 7760 2GB will not activate or do any graphics processing. It is stuck on the Intel Graphics. I am running windows 8.
-My laptop is set on high performance and is plugged in.
-I ran NovaBench and it used the intel graphics card
-FurMark detected Intelgraphics as my main graphics card
-I ran a small game called "Slender: The Arrival" on the lowest settings it could barely handle it
-During the game and the graphics run I had Catalyst Control Center Up and it showed 0% usage of the graphics card, indicating it failed to switch
- All the drivers are up to date, per the windows solution and from downloading them from the AMD website.
I would like a solution to either, have the switch start working, or to change a setting so only the graphics card is constantly used. If this does not work I fear I'll have to return the laptop for faulty hardware.
Just purchased a 1555 with the radeon 4570 512mb GPU, Windows 7 64-bit, and performance is generally very good apart from one strange result. Windows experience index reports the following -
Processor - 5.7
Memory - 5.8
Graphics - 4.9
Gaming Graphics - 6.3
hard disk - 5.9
So the only low result is the desktop aero graphics performance at 4.9, which seems strange when the 3D businnes/gaming graphics score is 6.3. Other results i've seen posted on forums of the Windows 7 WEI scores are usually the same for desktop graphics and 3D graphics in Windows 7, which I would have expected as I understood that aero uses the GPU similarly to games. If anything, it looked like in most results the desktop graphics scores were slightly higher than the gaming graphics scores.
Does anyone know why I could be getting a lot lower desktop graphics score compared to gaming graphics?
I've checked the graphics drivers are up to date.
Can anybody else post their Windows 7 WEI scores from the 1555 with the 4570 512mb GPU?
You can't Change your Graphics card, is there any graphics card that i can use through the PCI express slot, or the the expansion port? the laptop is hp pavillion dv2000 (exactly: dv2132ea) since i don't want to go through the hassle of changing my laptop. I just need a better vga card
View 5 Replies View RelatedI am just having a bit of trouble with my computer, and would love some advice if anyone has the time. Apologies for the length of the post, but I am trying to add as much info as possible from the get go! I have a Dell Inspiron 9300 laptop, and am running Vista Ultimate 32bit, which has been installed for just under a week. Until now I had no problems with it at all. I have 2 megs ram, and the GeForce Go 6800...............
View 10 Replies View Relatedsomeone said it was better to use 64 bit vs 32 bit for vista and was wondering if this is real? and wat are the benefits of using 64 bit over 32 bit and vise versa? except to utilize all of my 4 gigs of ram.
also the dell rep said their driver support for the 64 bit was not as good as the 32 bit and was wondering if this is true?
and will some games not work on 64 bit or does that not matter?
oh and someone said when you reformat you should reformat in ahci mode, and was wondering how you do that
I have a choice between 2 specific E6400's. What I really want is a backlit keyboard and the integrated graphics (battery life is important to me).
The problem is, from the two models available to me, one doesn't have the backlit, while the other has the NVIDIA.
The one with the NVIDIA is $100 more expensive. So the question is, is it possible to either upgrade manually to the backlit keyboard, or downgrade manually to the Intell 4500? How difficult and expensive would either option be?
I installed XP and everything seems ok but the computer doesnt want to suspend. When I click the power button (which is setup for suspend) or try to suspend any other way (like shutting the lid) the system will shut down but will come back online after about a minute or so. It doesnt want to go to sleep! Bad Boy. I have noticed that if I take off the power cord, it will go into suspend and stay there properly. I have tried two different power adapters, so I dont think its adapter-related. Its really annoying to have to totally shut down every time. I've tried disabling settings and hardware in the bios to no avail. I have DCP installed.I want to upgrade my WiFi link card to a wireless-n version. I guess this is the wifi link 5300 card. I actually bought one but its full height (533AN_MMW), so now I have to go an get the half height version (model 5333AN_HMW, right?!). One issue though, I dont know if my laptop has a third antenna cord in there for the third leg of the antennas. Can I add one? I am using a wireless N Dlink router.
Will this one work in my e6400?[url] I'm a little nervous about it because of the "G2" at the end of the model #, and the website says its for the centrino and I have a latitude.
I bought a new Dell E6400 laptop with Intel P8400 CPU. I tried installed Windows Vista, but the CPU experience index was only 3.0. I tried RMClock utility and it shows only 0.85 Ghz. I think I installed all needed drivers (Chipset driver, System Software etc.) and I set High Performance mode. But still 0.85 GHz. Any ideas how to force it to 2.26Ghz?
View 10 Replies View RelatedI was just wondering if anyone thinks that my graphics (8600GT 256MB GDDR3) in my M1530 is going from the following:
1. Laptop is 8 months old, I use it mainly for gaming and on average over those 8 months I would say I play games for at least 3 hours a day.2 weeks ago I bought Fallotu 3 to play it with mods, thats when these issues turned up which are:After playing for a little while, the graphics went all 'strange', moving in game was impossible, alot of the textures went purple then BSOD. (15 days ago)The game crashed on exit (not unusual if you know FO3 or Oblivion), then BSOD. (8 days ago)Similar to the first one, however the screen went 'speckly' and you could see different parts of the level (as if I had noclip on). I exited the game, but the 'speckles' were still present in Vista, including the shutdown screen. I turned it off and then on again and it was fine then. (Yesterday)Finally, similar to the above with the noclip style look, just no speckles, but I managed to exit the game, shutdown, restart and everything was fine again, infact I played for 4 hours straight after that. (Yesterday)
Unfortunatly I didn't get chance to read the BSOD errors.
Also bare in mind that I have played Fallout 3 for several hours each day since I got the game (16 days ago) without any serious issues (a few CTDs, but thats normal for FO3).
Apart from these issues I have never had a BSOD with this laptop, and very few other crashes that weren't 'understandable'.
So my question is; is this the starts of the NVidia GPU issue? Should I get a replacement or wait for more information?
I know that there are lots threads about various GPU related problems, but somehow I didn't find any information which i would be very interested in. So:
PROBLEM #1: I have dell m1710 (GPU: GeForce Go 7950 GTX; the last time i've cleansed dust lats time about four months ago) for 18 months. Its waranty is expired.
Some time ago, while playing a game which does not require lots of graphics power, the screen covered with color lines and squares (screenshots included). As I closed the program and looked at GPU temperature it was around 66. I've restarted my laptop and at first it didn't boot at all and all startup information and BIOS looked like written in some kind of hieroglyphs.
Now my laptop only boots on safe mode or normal mode but only if resolution is no more than 1280x800. But i think it won't last long until it won't work at all .....
I've read that GDDR3 is better than DDR3 (regular) in terms of performance. Which one does the SXPS 16 with an ATi 4670 in Canada have?
View 5 Replies View RelatedI was hitting 98C, so took my 1710 apart to AS5 my 7950GTX over the weekend.
The temps have dropped a little, but I notice now that no matter which driver I install, I am not getting the in game performance I was getting before, although I am gettting the 3D mark scores. Everything seems "jerky". i.e. its almost as if there is a lot of hard disk catching up if that explains it (I have plenty space free).
COD4 ran a dream before and this is now pretty useless unless I drop it to 1024x768 , but even then its jerky. GOW has gone the same way. This use to run a treat on 1400 * 900, but this is now the same.
The question is....have I broken my card, put to much AS5/too little on, or did the hitting of 98C do some damage! Is this a symptom of pending doom, should I take my lappy apart and redo the AS5..... !
This is a long winded question so bear with me.
Both me and my friend, have Dell XPS M1710 laptops.
mine has the Go7900GS 256MB, and my mates has the 7950GTX 512MB, Graphics cards. have been thinking about an upgrade to a XPS M1730. The base model of the M1730 comes with a single Go8700gt 256MB card in it.
my question is this card any better than our older ones at DX9 and DX10 Games?? there is also an SLI option for the 8700gt, again how would this compare to our older cards??
I have an M90 and my FX 2500M has memory failure. I upgraded the M90 with a T7600 CPU, 4GB Ram, and it is running Vista Ultimate 64. What do I need to do to run the FX 1600M? Any other suggestions on cards is appreciated. I use it for 3D solid modeling and mechanical design.
View 10 Replies View RelatedI got this new xps studio 1340 and I noticed in the device manager that the display adapter is NVIDIA 9400 MG instead of g210 (n10). I also checked the Nvidia control panel and it said the same thing. I also installed some gpu detector (GPU CAPS viewer) and it said the same thing .....
View 3 Replies View RelatedI went through around 100 pages of the long thread on e6400 but could not find much real information on the e6400. Can someone who knows post the following:
1. Good and Bad LCD manufacturers for the WXGA+ LED display.
2. Keyboard - specifically compared to a thinkpad keyboards.
3. Any Heat related issues the laptop has.
4. Other trouble spots to watch out for.
I'm pretty new to Dell notebook world. I was always told that Dell has a stinky customer service and their image wasn't that good around spot but care sharing whats good and bad about dell in general?
1- In the LCD option, it says touchscreen. Does that mean I can somewhat use this laptop like a tablet? ( Without the ability to twist the screen of course..)
2-Never knew whtas the different between 1dimms and 2dimms in RAM....
3-Compare Geforce 9400gs with the Mobile Intel® Graphics Media Accelerator X4500HD With PC-Card. Plus, what do they mean by "PC-Card" or "EXpress card" ?
4-Does Dell notebook actually give us 64bits windows or they're all 32bits unless they mention the option of 64bits?
5-Whats the difference between the normal e6400 model and the ATG model? Simply more durability +weight?
6- Whats an encrypted HDD or a ruggedized HDD?
7- I'll be using the notebook for design purpose. Such as photoshop, flash, illustrator or such. I'll be using 2-3 program at once with several picture/projet +internet + music. If my specs are 2.26ghz or 2.4ghz + 4gb ram + intel HD4500HD, will this notebook handle it?.............................
I wanted to do this for a while. My dell e6400 has 1280x800 display. I want to upgrade to 1440x900.
I found this one New SCREEN 14.1" WXGA LCD for DELL E6400 B141PW04 on eBay (end time 14-Jun-10 15:54:13 BST)
on ebay.
Does anyone have experience of dealing with ebay screens, i mean are they what they say they are(working properly and stuff)?
Is there anything special I need to be looking for then buying new screen?
i got my e6400 with 1280x800 resolution screen. I notice that this screen have greyness comparing to other laptops and right colour are really important to me.
Is it possible to replace my screen to high resolution one(1440x800)?
Can i replace processor as well if i decide to do so in the future?...
I have a new spare keyboard for my e6400. I need to sell it and was wondering what other models would it fit. e6500 and e4300 maybe?..
what would be an honest price?
well i currently have a studio 1537 but i want to return as there are some problems with it and i still need a laptop for school.
so i was wondering how is the e6400? i hear some peoples e6400's are freezing up. so i was wondering is there any major problems with them? or do u reccomenend any other laptop?
i was going to buy from the outlet because they do seem to be pretty cheap and i am on a budget...
and how are the e6500's? any major difference except the size?...
Im getting my E6400 configured with just 2GB in one slot and buying an extra 2GB module aftermarket.
In the past Ive had trouble with compatability issues between two different RAM modules.
Please recommend a specific module and source that has proven to work without problems on the E6400.
this list may be of some use to you. As of 12/April, the following downloads are available for Vista 64-bit (similar downloads for other Windows versions), essential downloads are highlighted in green..........................
View 4 Replies View RelatedI'm in the process of trying to decide between getting an E6400 or E4300 to replace my aging Toshiba A105-4074. I'm somewhat surprised by the lack of discussion here about the E4300 compared with the huge number of threads about the E6400.
I have an E4300 here at work that I have been impressed with, so I have hands-on experience with it. I haven't had any hands-on experience with the E6400, and have only seen one briefly. While I've read lots of good things about it, I wish I could use one for a couple of days in order to get a feel for it .....
I need to order a couple Dell E6400's for my company. We want to do 4 monitors on each one through a docking station, that is the part that is giving me some trouble.
Does the E-Plus docking station have a built in video card that supports multiple monitors .....
Just got my E6400 from Dell Outlet today and i noticed it's running noticeably hot.
I've read some of the posts on the nvidia overheating problem so I decided to run the same tests other people did. The screenshot is after running 3DMark2006 on Balanced power setting.
Are those temps ok? I talked to a rep who acknowledged the potential problem with the nvidia chipset and said if i send this to the depot now they can take a look at the mobo, cpu and gpu and have it back to me in less than 10 regular days.
Since I have finals coming up, I'd much rather not send it in unless they offer me onsite or some potential freebies, which the rep refused to. So any suggestion would be much appreciated. Should I run some more tests?
for the E6400 media bay (I hope that's what it's called, I'm referring to the location where the optical disk is). I'd like to add a SSD before my trip to overseas and I have a few questions about this:
1) what kind of SSD should I get? I'd like to get a 128GB or 256GB SSD. Is it any 128/256GB SSD or do I need to get a specific kind?
2) If I want the SSD to be the primary drive and a 500GB HD to be the data drive, do I need to put the SSD in where the HD is and then put the 500GB HD in the optical disk caddy tray? (I bought the newmodeus caddy tray)