alright folks my friend is trying to buy a inspiron 15 and for some reason i cant apply the 225 dollars off coupon. How do i remove the standard 15 percent off?
here is the link to the coupon http://www.dealcatcher.com/dell-home-coupons
I'm looking at buying a studio xps 16 and there's a new coupon found here in nbr that gives u a $200 discount along with a $150 gift card. Since i'm a university student here in the us 'm entitled to the EPP program.
Thing is, my uni provided me with the epp code but i don't know how to combine it with the coupon. If any1 knows how i can combine them i'd be very gratefuL
I cant believe this really happened. I said in another post that this would happen knowing my luck and it DID. I was just on it an hour ago and the coupon was working now it said its been used up. Im devastated right now, i dont even think im going to be buying a Dell anymore!
I've got a 1555 spec'd out with a 25% discount coupon code applied($1154 to $865). I was wondering if anyone thought it was worthwhile to call Dell up and try to get them to offer me an even better deal. There's nothing else I really want....I mean, I guess they could up me from a P8600 to a P8700, but that's about it. So I wonder if I could get them down to an even $800. Any thoughts or recommendations? I'm on a very limited budget, so every bit helps...
i got my dv7t last august (08)... it spec'd out to about $2300 but i used a 30% off HP coupon code to bring it down to a (more) reasonable $1600 or so...
im just wondering - has anyone seen any of these 30% off coupons lately? i feel like buying another ridiculously decked out laptop for absolutely no reason.
Has anyone "SUCCESSFULLY RECEIVED" HP cashback through Bing for purchases with HP coupon. I've seen in this forum people confirmed they received email from Bing for the HP cashback. I know it will take up to 60 days for releasing the cashback. Has anyone actually received the cashback for purchases with HP coupon.
I have tried to put it in but there is a 1/4 in pin in the way. Is there a way to remove with out any harm. My Inspiron 9400 video card is having problems.
I have tried the 400 deg for 10 min but it did not last
Guide to Switching your Inspiron 9300/M170 WUXGA into the Inspiron 9400/M1710:
You can't simply replace the display screens. The instructions below must be followed for your screen to work properly.
Required Materials: - Small Phillips (I used #0 Phillips) - Either 2 monitors (9400 and 9300) or part #YPNL-N017B (Google the # to buy it).
Step 1: Remove the display assembly. Dell has an excellent guide for this on their website. [url] Click on Display)
Step 2: Remove the LCD Bezel (the gray trim around the screen). This requires removing the screws under the circular pads. I used a small flathead to pry open the bezel.
Step 3: Remove the 8 screws around the sides of the LCD. This will make it so your screen can be taken out. Do not worry about any screws on the top, they are for other things.
Step 4: At the bottom of the screen, there is a green circuit board. On the left side, you will see a screw holding the wire down. Remove this.
Step 5: Remove the LCD screen from the case.
Step 6: Look at the bottom circuit board again. This is the board we need to swap! Disconnect the 2 connections on the board. There should be on on the bottom and one on the side that is white.
Step 7: There will be 3 silver screws holding the circuit to the screen. Remove these screws. Note: This requires a very small phillips. I used a #0 Phillips to do the trick.
Step 8: Repeat steps 1-7 for your other monitor OR if you don't have another monitor...you will need to buy an inverter chip. The mfg # is YPNL-N017B. If you google that number, you should find a bunch of sites willing to sell it.
Step 9: Simply swap the bottom circuit boards between monitors or insert the new one that you bought.
Step 10: Follow steps 1-7 in reverse to reconnect everything back up! Before screwing everything back up. I suggest you plug it in first to test it out.
Congratulations. Your WUXGA LCD will now work properly on the Inspiron 9400. For anyone wondering, you MUST replace the bottom circuit board or the brightness controls will not work. You brightness will be stuck at the lowest setting and nearly impossible to see.
I am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
"Noise The Inspiron 15 is fairly quiet, though at times the fans did get a bit noisy. Basically you won’t hear this notebook at all in an environment with ambient noise, but if you’re in a library like quiet environment you might bother those nearby with some fan noise."
I am in the process of buying the new Dell Inspiron 15. I just want to know if i have made the right choice. It seems to be a really good laptop and i have seen some very positive comments within some review's on Youtube.
I got a phone status update a couple of days ago that said it was supposed to ship by Nov 5th (tomorrow). Normally when I order stuff from Dell, it shows up a lot sooner, but I guess the 11z is a hot item so it's taking longer.
I ordered mine pretty decked out... I got the dual-core Pentium CPU, 320 gig hard drive, Wireless N card, etc. I'll probably still stick a 500 gig drive in it and use the 320 as an external.
I recently looked to purchase another hard drive for my wifes inspiron 17 1720 and found that the hard drive came without a connector so some sort, it appears the dell needs a special connector to connect to the sata hdd. i looked at the 1st hdd and it has this connector, i contact dell and they didnt know what i was talking about
My Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
BEEN a While and A long time... I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.