I have a Dell Inspiron 8100. It hasn't been used in a while. When I go to charge the battery, the battery indicator light flashes rapid amber. When I go to turn the machine on, the light go green and then shut off. Is this a problem with the battery, the power supply, or the motherboard?
View 10 Repliesi found a old dell inspiron 8100 at my work that needs repaired.
the laptop works good except when i first got it couple days ago the screen would stay on but when you first start it would have a red or pink tint to it than would clear up after like min or 5min to normal.
so i ran it for couple hours because it did say with a note on the laptop the screen blacks out.
so that was true it went out than when i close the lid and open it would come back on for awhile.
and than it got to the point it ony comes on for like 5sec at start up than goes right off but you could see everything with a flash light facing it .....
I want to upgrade my now-3-year-old TravelMate 8100's HDD, RAM, and OS (to Vista).
The memory is easy enough, but I have a PATA HDD. Do I have to replace it with a PATA drive or can I use a SATA drive? Is there any concern with more power consumption with a faster drive?
I don't know anything about hard drives so I am not sure of the difference of terms like PATA, SATA, ATA-6, etc.
Do I need to flash the BIOS if I change the drive to a SATA one? I see that some of the versions say for SATA systems only.
The time has come, I have to do something with my Travelmate 8101. Pentium M 730 1,6GHz seems a bit slow, as I can get a Pentium M 770 2,13GHz relatively cheap. The problem is, I can't seem to get it open! Does anybody have any experience with opening/modifying the TM 8100?
And also, how big a difference would the new processor do compared to the old one? I'm also considering expanding the memory from 1GB to 2GB.
I have the last couple of dayes, tryed to connect my Prosonic flat screen via DVI to hdmi cable from my Acer Travelmate 8104wlmi notebook....
I have the lates updates also Hydrevision to my ATI mobility readion X700 grafix card.
I even called Acer support here in Denmark.. they couldent help
I been googling"... no result.
I cant get any signal shown on my Flat tv. "NO HDMI SIGNAL"
Pic.
[url]
I have tried to put it in but there is a 1/4 in pin in the way. Is there a way to remove with out any harm. My Inspiron 9400 video card is having problems.
I have tried the 400 deg for 10 min but it did not last
Here are some quick pics and a youtube video at the bottom.
All closed. Left to right: Studio 15, Inspiron 15, Inspiron 1525. Lol, chicken and artichoke pizza in the background xD. It was lunch, I was hungry.
Inspiron 15 & Inspiron 1525 Side By Side. Inspiron 15 on left, Inspiron 1525 on right.
Studio 15 & Inspiron 15 Side By Side. Studio 15 on left, Inspiron 15 on right.
Studio 15 Keyboard
Inspiron 15 Keyboard
Inspiron 1525 Keyboard
HD Youtube Video I Made: [url]
Guide to Switching your Inspiron 9300/M170 WUXGA into the Inspiron 9400/M1710:
You can't simply replace the display screens. The instructions below must be followed for your screen to work properly.
Required Materials:
- Small Phillips (I used #0 Phillips)
- Either 2 monitors (9400 and 9300) or part #YPNL-N017B (Google the # to buy it).
Step 1: Remove the display assembly. Dell has an excellent guide for this on their website.
[url] Click on Display)
Step 2: Remove the LCD Bezel (the gray trim around the screen). This requires removing the screws under the circular pads. I used a small flathead to pry open the bezel.
Step 3: Remove the 8 screws around the sides of the LCD. This will make it so your screen can be taken out. Do not worry about any screws on the top, they are for other things.
Step 4: At the bottom of the screen, there is a green circuit board. On the left side, you will see a screw holding the wire down. Remove this.
Step 5: Remove the LCD screen from the case.
Step 6: Look at the bottom circuit board again. This is the board we need to swap! Disconnect the 2 connections on the board. There should be on on the bottom and one on the side that is white.
Step 7: There will be 3 silver screws holding the circuit to the screen. Remove these screws. Note: This requires a very small phillips. I used a #0 Phillips to do the trick.
Step 8: Repeat steps 1-7 for your other monitor OR if you don't have another monitor...you will need to buy an inverter chip. The mfg # is YPNL-N017B. If you google that number, you should find a bunch of sites willing to sell it.
Step 9: Simply swap the bottom circuit boards between monitors or insert the new one that you bought.
Step 10: Follow steps 1-7 in reverse to reconnect everything back up! Before screwing everything back up. I suggest you plug it in first to test it out.
Congratulations. Your WUXGA LCD will now work properly on the Inspiron 9400. For anyone wondering, you MUST replace the bottom circuit board or the brightness controls will not work. You brightness will be stuck at the lowest setting and nearly impossible to see.
Any owners yet? I'd love to get some reviews.
View 10 Replies View RelatedI am looking into replacing my old Dell Inspiron 6400, as it has been excellent -I think I should buy another Dell!
I am looking at the new Inspiron 15, which has a 15.6" display.
Can anyone tell me whether the actual laptop itself is bigger or smaller than my current 6400? I am interested in knowing width.
I see a lot of dead space on my 6400, and hopefully Dell realized this, and instead of making another 15.4" with dead space, they made use of this and gave a better display!
The processor of the mini laptop is atom N450, i want to know can i install windows server 2003 32 or and 64 bit os on this machine.
View 10 Replies View RelatedSeems to be an upgrade of the old Inspiron 13 with Inspiron mini looks, only found it at the Singapore site here.
View 10 Replies View RelatedI read review on
[url]
and it says:
"Noise
The Inspiron 15 is fairly quiet, though at times the fans did get a bit noisy. Basically you won’t hear this notebook at all in an environment with ambient noise, but if you’re in a library like quiet environment you might bother those nearby with some fan noise."
http://www.dell.com/us/en/home/noteb...cs=19&ref=lthp
Discuss.
PS: If anyone gets this PM me, i got tons of questions
I am in the process of buying the new Dell Inspiron 15. I just want to know if i have made the right choice. It seems to be a really good laptop and i have seen some very positive comments within some review's on Youtube.
View 7 Replies View RelatedI was just wondering if anyone had bought or used the new Dell Inspiron 11z?
Now available in the UK, seems nicely specced and thinking about buying one as a more powerful alternative to a netbook.
Has anyone seen the new Inspiron 17 laptops?
View 4 Replies View RelatedI m looking forward to buy a notebook either Inspiron or XPS.
I m unable to find out the difference between the two streams of notebook.
The inspiron is cheaper while the XPS is more expensive one.
I will be using the notebook for programming and data processing via oracle, .net, etc.
Note: I m not going to use the notebook for gaming.
Kindly guide to buy the best stream of notebook suitable for me.
I got a phone status update a couple of days ago that said it was supposed to ship by Nov 5th (tomorrow). Normally when I order stuff from Dell, it shows up a lot sooner, but I guess the 11z is a hot item so it's taking longer.
I ordered mine pretty decked out... I got the dual-core Pentium CPU, 320 gig hard drive, Wireless N card, etc. I'll probably still stick a 500 gig drive in it and use the 320 as an external.
I recently looked to purchase another hard drive for my wifes inspiron 17 1720 and found that the hard drive came without a connector so some sort, it appears the dell needs a special connector to connect to the sata hdd. i looked at the 1st hdd and it has this connector, i contact dell and they didnt know what i was talking about
View 3 Replies View RelatedMy Dell Inspiron has a problem, everytime i connect the power supply to charge it while its on the monitor will completely black out on me... Has anyone had or heard of this problem before?
View 10 Replies View RelatedBEEN a While and A long time...
I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.
Can any of you Inspiron 13/M1330?
If you want any other pictures let me know. I know they're a bit blurry but the camera isn't cooperating on where it wants to focus.
View 10 Replies View RelatedSo I'm trying to upgrade my ram, right now I have 2Gb that the system sees, however when I crack open the back all I see is 1 slot that has 1 chip in it which is a 1GB chip...
Does anyone know where the other RAM slot is?..
why when i'm watching simple flash movies for more than 3 minutes in full screen my laptop gets real warm...the cpu gets crazy... 70 even 80c...?
View 4 Replies View RelatedI am currently running 2gb, but I think I remember reading somewhere that it can use a little over 3gb...
Is this true? Of course, I could be mistaken.
The main points which I'm pretty happy about are:
Long battery lifeCool and quiet operation of the machineSmall form factorRelatively lightFlawless, bright and crisp displayKeyboard has a good feel to it
One of the major reasons I purchased this machine was because the hardware that came with it was plenty and mature. When I purchased the T400, the hardware was squeaky new but that brought with it tons of issues primarily with compatibility and bugs in the drivers. I'm a Linux user and the I13 worked out of the box with Debian and Ubuntu. The drivers are very stable and the machine is very quick.
This machine is *not* for gamers or heavy duty graphic artists. Its for the average Joes and Janes of the world who like to word process, surf the internet, watch movies and want to use Linux
I do have some gripes about this machine ( nothing is perfect you see ).The display seems to be a little loose. It wobbles while typing on a soft surface. Its not annoying but its something I dislike.It has only 2 USB ports. Dell could've put in atleast 3-4 ports. It would've been nice
Over all, my journey with this machine has been uneventful! Just the way I like it
My Beast's 80 gig 5400 rpm HDD is on its last legs, and I was wondering what Hard Drives are available for me to replace my old one. I will definitely be looking to upgrade.
View 10 Replies View RelatedI was going to order an Inspiron 537 desktop, but am now considering an Inspiron 15 Notebook..............
View 7 Replies View Related