The time has come, I have to do something with my Travelmate 8101. Pentium M 730 1,6GHz seems a bit slow, as I can get a Pentium M 770 2,13GHz relatively cheap. The problem is, I can't seem to get it open! Does anybody have any experience with opening/modifying the TM 8100?
And also, how big a difference would the new processor do compared to the old one? I'm also considering expanding the memory from 1GB to 2GB.
I want to upgrade my now-3-year-old TravelMate 8100's HDD, RAM, and OS (to Vista).
The memory is easy enough, but I have a PATA HDD. Do I have to replace it with a PATA drive or can I use a SATA drive? Is there any concern with more power consumption with a faster drive?
I don't know anything about hard drives so I am not sure of the difference of terms like PATA, SATA, ATA-6, etc.
Do I need to flash the BIOS if I change the drive to a SATA one? I see that some of the versions say for SATA systems only.
I have the last couple of dayes, tryed to connect my Prosonic flat screen via DVI to hdmi cable from my Acer Travelmate 8104wlmi notebook....
I have the lates updates also Hydrevision to my ATI mobility readion X700 grafix card.
I even called Acer support here in Denmark.. they couldent help
I been googling"... no result.
I cant get any signal shown on my Flat tv. "NO HDMI SIGNAL"
Pic.
[url]
I have a Dell Inspiron 8100. It hasn't been used in a while. When I go to charge the battery, the battery indicator light flashes rapid amber. When I go to turn the machine on, the light go green and then shut off. Is this a problem with the battery, the power supply, or the motherboard?
View 10 Replies View Relatedi found a old dell inspiron 8100 at my work that needs repaired.
the laptop works good except when i first got it couple days ago the screen would stay on but when you first start it would have a red or pink tint to it than would clear up after like min or 5min to normal.
so i ran it for couple hours because it did say with a note on the laptop the screen blacks out.
so that was true it went out than when i close the lid and open it would come back on for awhile.
and than it got to the point it ony comes on for like 5sec at start up than goes right off but you could see everything with a flash light facing it .....
im gonna be getting my first laptop this weekend and ive never set up a computer before!
I was just wondering what do I do when I turn it on for the first time (straight out of its box)
*Does it need charging first?
*Do I install Vista on it my self? (Which I hope comes with the CD!)
*Then do I install my protection firewall thingy?
does acer warranty see if the laptop (6 screw plate) has been opened ?
View 5 Replies View Relatedjust got my 1410 SU2300 machine. I did a clean install of Windows 7 Pro x64 and installed the updated Intel drivers for video and chipset from the Timeline Tweaks thread (all the others were from Windows Update). With the Win7 Home Premium that came with the unit, I was able to come out of suspend automatically when opening the lid.
Now, I have to press the power button to get the machine out of suspend. Could it be one of the power management drivers causing this problem? Is there a solution to it, or am I stuck like this?
how to open up a Acer Aspire 5050. My right mouse button is constantly being pushed down, i've disabled it through the drivers but i would like the laptop to be fully functional. I was wondering why this could be happening.
I'm looking for a guide so i can investigate! Do you think it would be easy to repair? Or would i just need to replace the board underneath the buttons? The left click and the scroll buttons did work properly before this happened. Now only the left click works.
My 5750 wont boot past the acer logo screen which just keeps opening and closing. F2 wont work. One time I got to the safe mode screen by hitting F8 but now that is not engaging either. I removed the RAM and cleaned them well. I also tried removing any left over power static by pressing power for about a minute. I do not have any cds for this machine since it was given to me used and it has worked fine for months until i recently removed a virus called DOS....
View 4 Replies View RelatedI have an Aspire V3 which has become very crippled. As the laptop was not in my care before now, I had tried to use the Restore Factory Settings option in the Recovery Management tool, however when I click the button to restore, nothing happens.
Â
I have tried running windows 8 in safe mode as well as pressing alt-f10 on start up. Nothing seems to be working. Is there any way I can reset this short of using a pre-made recovery disc?
I have an Aspire V3 which has become very crippled. As the laptop was not in my care before now, I had tried to use the Restore Factory Settings option in the Recovery Management tool, however when I click the button to restore, nothing happens.
Â
I have tried running windows 8 in safe mode as well as pressing alt-f10 on start up. Nothing seems to be working. Is there any way I can reset this short of using a pre-made recovery disc?
I just bought an Acer Aspire D255E with a cracked display. I tested it and it worked fine. Replaced the display with a brand new one, and the result is that it comes on, displays the opening screen, briefly flashes what looks like the screen you get when you shut down abnormally,then powers down. It will also power down in about the same time if I F2 into the BIOS.
View 8 Replies View RelatedI have changed the Windows power settings so that when I close the lid it goes into hibernate mode. However, when I open the lid it does not start the laptop and restore from hibernation. I have to open the lid and press the power-on button and then it restores from hibernation.
Â
I have a much cheaper Toshiba Laptop that just automatically starts and restores from hibernation when I open the lid. As far as I recall there were no special settings that I changed in order for the Toshiba to work like that, just the setting in the Windows power option that permits hibernation when closing the lid. The Toshiba run Windows 8.0.
Â
Does this model Acer have this feature? If so, how do I set it up to work?
I successfully upgrade an old laptop so that it will run well and not be too costly to upgrade either? So slow at present....
Laptop is:
acer travelmate 4502WLMi running xpsp3
Was thinking that probably the only upgrades worth considering were ram and hdd.
If this is the case what size mem and spec will work?
If the hdd is worth upgrading do I go for internal or external? and what size ?
ive just re-installed vista home premium on my acer travelmate 5320 but now the led for the wireless is reversed, so when the wifi is on the led is off and vice versa does anyone have any ideas whatsoever as i am at a loss with this one.
View 4 Replies View RelatedI have just been given a TravelMate 530 2.2 cpu Lappy
Fine for all I need but I would love to upgrade the memory. I see it says it can only go up to 1 gig and that it has 256 as standard.
I see there is a slot under a cover on the back, but only 1 slot (Unless I'm not looking properly)
Can I just stick a 1 gig unit in this slot and all will be fine or is there some unusual method to upgrading the memory. Hope it's nothing like the old Dells
=i bought a new travelmate 5730 it came wth basic Linux.....so i formatted it nd installed windows XP 2......then i installed all drivers.......n stufff
actually i want that "empowering techoonology"......how to get it?
i installed everything frm the given CD......bt wen i press the button "E"
it shows error "file cannot b found"
so how to get tht "empowering technology" also want tht "e-recover,PSD,n other features of "empowering technology".......
I want to upgrade the HDD of my TravelMate 2490 notebook but I can't find anything on ebay. Can I used other model's HDD as a replacement? What are the other models that are compatible with TravelMate 2490?
View 8 Replies View RelatedI was given an Acer TravelMate 2300 by someone who has a new one. It came with no guarantees and no recovery CD. It had working verison of XP Pro on it through SP2. I applied SP3 and several updates. It worked good until... I noticed that the C drive was formatted FAT32. So I thought it a good idea to move it to NTFS. Without checking, I fired in "convert c: /fs:ntfs". It rebooted and after a brief look at the Windows XP splash, it goes straight to a stop code x0000024 BSOD. There was nothing on the drive except for the OS so I was felt OK withjust reinstalling from my media.
I dragged out my copy of XP pro slipstreamed with SP2. Booted from CD, went through XP's native setup and detected an "unknown" partition where C used to be. I must've really slammed it. I chose to install to the unknown partition and XP offered to format it NTFS. I chose the thorough format option but it goes only to 24% and stops. The display still shows the progress bar, blue background etc. at 24%.
Since I don't have much experience with laptops, let me ask, is it possible that this laptop/drive ONLY formats to FAT or FAT32 and won't take an NTFS volume? If it will, are there any ideas out there how to apply and NTFS format so I can get this cute little laptop back to a usable state?
i got myself a new Acer Travelbook 5320, i get a win xp image, i burn it to a disc, i put it in, setup loads, i hit enter and he says the setup hasn't found a HD? it says it comes with feakin 160gb of HD memo!
View 4 Replies View Relatedmy friend has this laptop running Windows XP.
The problem:
Every time I restart, the network card is disabled by default.
On very few occasions, the network card disables itself when surfing the internet.
I tried:
Disabling other network cards
Going to Device Manager, NIC, Untick "Allow the computer to turn off..."
Scan for malware/viruses using AVG 8.0
Conclusion:
Still it doesn't work!
Hi does anyone have a service manual for a Acer travelmate 530?
View 4 Replies View RelatedI have a ACER TravelMate 6003.
I have update the PhoenixBIOS: 3A19 to 3A20.
I can't Boot with a USB disk with this BIOS because the USB option is not appear in the BIOS.
There is another update to this BIOS?
whether the Travelmate 6592G has a matte or a glossy screen. I'm having a had time finding a laptop with those sort of specification that has a matte screen - the information you find online seems often to be ambiguous
View 4 Replies View RelatedI bought a used Acer TravelMate 2420 laptop (WinXP, RAM 1 GM, hard disk 40 GB, Intel Celeron M processor 1,50 GHZ) and since the beginning it had overheating problems and also some issues with power management. And yes, I know it was a stupid thing to buy it, but knowing it doesn't help.
Now the problems:
1. Whatever I do, it keeps overheating, even if no programs are opened. The laptop's fan works very vaguely, and I can hardly hear any sound of it. At first it didn't trouble me much, as it was winter and it would still work, although heated up. I also bought an USB ventilation pad (2 fans), and it helped for some time. But now, when the air temperature is over 30 degrees (in the room), the laptop just "freezes" in the middle of work and stays like this for about 20 min, or just suddenly shuts down completely.
2. I can't turn it off if the power supply is on - I have to unplug it just before the computer shuts down, otherwise it keeps on restarting. Also I can't use it without a battery, as it doesn't turn off in any way (even pressing the power button for a long time doesn't help), and I have to unplug power supply (which ain't no good for computer).
What I already tried to do:
1. Re-installed Windows, installed updates.
2. Checked the computer with various antivirus and antimalware programs (Avira, AVG-free, Malwarebytes' Anti-malware, Spybot Search and Destroy, Ad-Aware).
3. Installed additional Acer utilities: Acer emPowering Framework, Acer ePerformance Management, Acer ePower Management - but they basically didn't let me change anything important (like the fan speed, for example). With PowerManager I changed the CPU speed to Medium, well, it helped a little bit, but the comp. is totally slow now (and still overheats) ... if I set the speed to High, it just turns off after about 10 minutes.
4. Instaled SpeedFan to speed up the fan - but it didn't detect any fan in the computer!
5. Dismantled the laptop (removed the hard disk, the keyboard) to see if the fan isn't clogged, but I still couldn't reach it. So I just used a vacuum-cleaner as much as I could reach, but of course it didn't change anything.
6. Oh and of course I disabled all the unnecessary programmes (by modifying msconfig -> startup).
7. Ran HDD diagnostics, S.M.A.R.T. report showed no problems.
I've read quite a lot now about these laptops, and seems like they all have this overheating problem, but it's usually solved by using a ventilating pad (which helped in my case a bit, but basically didn't solve the problem). I didn't found anybody having these power problems, so I guess maybe a previous user made some stupid modifications... I just don't know how to fix them now.
I uninstalled 2 programs and deleted shared files after the uninstall.
On reeboot of the computer my screen was pixellated and it was hard to read text.
I have tried the following to get the screen back to normal.
System restore
reload uninstalled programs
Installed video drivers
Contacted Acer who told me to put system back to factory defaults, which I did
Nothing has worked so far
I have set my screen size to 1024 * 768 which allows me to read text but the screen still doesn't look right.
I have plugged in an external monitor which there is no problem with.
not sure but my acer beeps three times when starting and no screen showing up, now this is intermitten because I have gotten it to load xp and run, this just started so Im going to maybe clean it out etc, anybody have a idea what I should look for, the funny things is it will work and then it wont
View 6 Replies View RelatedI got my hands on a Core Duo T2050 to drop in my 2490. I went for that CPU as it was cheap, and a 533 FSB, my 2490 allegedly has a 943 chipset (based on the code on the sticker, which started AY702.002). Updated to the latest BIOS, which in the notes has dual core support for various chips.
Fitted it, turned the machine on, and... Nothing. Well, not quite nothing, had the fan and power light, but nothing else.
I've no reason to suspect the CPU is faulty, so I guess it just doesn't work. What puzzles me is why it doesn't work. Surely as it's teh right socket, the chipset should work with it, and the BIOS has dual core support it should work? Unless the motherboard model sticker was fibbing, but that seems unlikely as this machine has DDR2 and SATA, which ties in with being a 943 as well.
Is there a reason why this particular CPU doesn't work, and a definite option for one that does? I can live with droppnig a core solo in, but would rather go dual core for the money
I have problems with the high temperature of my Travelmate 5624WSMI. It is too hot!
However:
- I cannot hear any fan running (I do not know if I should, and I do not remember if I did when it worked properly).
- I read that it might be due to dust. For this reason I tried to clean it (them?) with a can of compressed air but with no success.
- I installed SpeedFun. I read this: GPU 51 °C (or more!); HDO 42 °C; Temp1 32 °C; Temp2 42 °C; Core0 46 °C; Core1 46 °C. As I understand, GPU is burning.
- I tried to open my notebook but without success. I do not how to do it.