Just wondering to all those with an Ispiron 9300 what is the maximum supported hard drive size. According to dell chat it is 100Gb...but of course that doesn't mean anything. I have the 9300 with an SATA drive .
I've been looking everywhere for an answer to this question and can't find it. I have an Inspiron 9300 (old.. I know), and it still works great for everything I need it to do, except one thing. I have no storage space at all.
I've been looking at throwing in a new HD, preferably as large as possible.
The only problem is all the conflicting things I hear about these systems.
First off, I know that mine is an ATA model, not SATA. I'm definitely looking for storage space above all else. So whats the biggest drive this laptop will support? I've been looking at this one (Western Digital 250 GB 5400 RPM), but I've heard things about the bios only allowing hard drives up to a certain size.
I've got an Inspiron 9300 that I bought in 2004. Now, I know that it's a bit outdated (it's processor is an Intel Pentium M 1.86) with a 100gb hard drive.
My question is is it possible to get a bigger compatible hard drive in the computer's slot? I'm almost full with music (that I've copied from my CDs) and family photos, etc. so it would be handy to have more space to work with.
It's still in good shape. The warrantee just ran out a year ago and I've got a bunch of newer expensive parts (screen, heat sinks, heat fans, etc.) so it's likely worth my while if such a hard drive is available.
My computer might last another three or four years without having to need serious costly repairs making it best to simply buy a newer one. (I'm keeping all of my necessary files on a 320 gb USB drive in case that happens.)
I have done some research, and found some 500gb SATA HDD's for laptops, but I have noticed that they are 5400rpm. The fastest large drive I have found is a new Hitachi, 320 7200rpm drive (which is supposedly coming out and will probly cost a fortune) Some told me that the speed doesn't make a difference when they are a big drive. If I get a 5400 rpm drive will it kill my gaming (oblivion, Half life 2, Bioshock, etc.
Recently my brand new studio 17 updated, about a week later I noticed that 50GB had gone missing! I of course called tech support to see if they could help (good luck) after spending hours on the phone they could not really solve the issue, asides from doing a factory reset.
Now again I am having this issue again, once Vista updated it is slowly eating away hard drive space. There is currently 31.4GB being used (yes, this includes all hidden files) on a 450GB hard drive, yet the system reports only 402 GB free space. Each day it decreases about 2-4 GBs ......
Bought a Dell 9300 couple years ago and I'm wondering if upgrading my hard drive from 5400 to a 7200 rpm will I notice a big enough boost in performance to justify the purchase?. and second will this work in my laptop?
HITACHI Travelstar 7K200 HTS722020K9SA00 (0A50940) 200GB 7200 RPM SATA 1.5Gb/s found on this page Ľwww.newegg.com/Product/ProductLi∑∑∑7200+RP
using my unmodded 9300 and shut down for the night. This morning, when I tried to reboot, the process would get to the Windows splash screen, then flash a blue screen so fast I couldn't read it, then go to a black screen that gave me 5 options to start windows. No matter which one I pick, the same process happens again.
I videotaped the blue screen and it reads: a problem has been detected and windows has shut down to prevent damage to my computer unmountable_boot_volume and then it gives me unhelpful advice on how to fix the problem.
I ran the Pre boot system assessment and all items passed. Then I ran the Dell Diagnostic Utility for "unable to boot O/S" with the following results: HD Read Test error: 00F0:0244 and HD Verify Test error: 00F0:1A44. Both of these were on sectors in the middle of the volume and I canceled both tests after about 10 errors. All other memory, graphics, and HD tests passed.
I tried booting from the XP CD and repairing from the CD with no change. I ran chkdsk /p and it found one or more errors on the volume.
bootcfg /list gives me: there are currently no boot entries available to display.
What are my best options on trying to recover this without losing data? I have a fairly recent backup, but would like to try to save what's on the HD. Parallel install? What is fixboot used for?
Dell lists my drive as: M7601 Hard Drive, 60GB, 9.5MM, 7.2K Hitachi, Ibm Moraga
What is the drive of choice to replace this if I need to?
Using my inspiron 2330 (only 18mths old ) as normal next thing it tells me it encountered fault and has to reboot anyway it keeps saying scanning and repairing drive (c) then does not allow me to log in so i manage to get into bios to do a scan and it guves me a error code of 2000-0142 ¬†validation code of 112406 and and then says harddrive 0-s/n wd-wmc152946178
When i finally manage to log in my desk top screen is flashing and keeps telling my hard drive fault ....
I have a problem in¬†bootin my inspiron 14z. Everytime when I start the boot,¬†it always stuck at Dell logo. Sometime, it said that internal hard disk drive not found to resoldve this issue, try to reseat the drive. The system was running well just until last night.
I have a Dell Inspiron 1501 Laptop, last week when switching on the laptop I was presented with an error saying "Disk Read Error", the laptop would not boot up at all not even in safe mode.
I ran Dell diagnostics and it gave me a error code of 0146 which is harddrive related. I then attempted to repair the windows installation using chkdsk /p and /r but this seems to have made things worse! When booting up, all i can see is a blank screen
I replaced the hard drive in my Dell Inspiron N5110 laptop. ¬†I need to get the programs and data files transferred to the new drive. ¬†I have a Repair Win 7 - 64-bit CD, made from the old hard drive -- do I use that to boot up the computer? ¬†Or do I use the old hard drive image that I have stored on an external hard drive?
I ran the diagnostics tools and it failed to detect hard drive. I'm trying to use a usb OS but it fails to boot too. I tried tweaking the configs in the bios setup ( sata port, etc) , yet I cannot even use an external boot drive.
How do I tell what type of hard drive I have in my Inspiron 1520? I am pretty sure it's IDE/ATA, but I am seeing info in my web research that says SATA. Not sure which to buy. Maybe this is a dumb question.
Just brought home a Dell Inspiron 15 from Best Buy tonight. While going through Windows Explorer and trying to figure out the goofy "Libraries" thing for Windows 7, I noticed that my hard drive is partitioned like so:
OS (C): 38.4GB free of 58.5GB Local Disk (D): 186Gb free of 229GB
Now I am always used to everything being on 'C'. When I tried to copy all my stuff over from my previous Dell 1420, it wouldn't all copy over to any of the libraries or my "user" folder (Erin) since I didn't have enough space. So despite Windows 7 setting up all these nifty folders in my "Erin" folder (C:/Users), I can't fit all my stuff there.
Is Dell partitioning their hard-drives differently? Am I nuts for thinking mine is set up weird?
The notebook is about 5 yrs old and has the original 20Gb HD which I wanted to upgrade to a 120. The operating system is XP and the computer runs fine; it just needs more HD space. I purchased a new WD HD which will not install. When I put the new drive in (with XP install disk in CD drive) the system will hang for about five minutes before finally getting to the setup routine. The setup sees the new HD and prompts to format it and I did. Once the format is done and it reboots, I get a BIOS message saying "fixed disk failure." At this point, it will not proceed to install windows. I've also tried booting from a floppy. Basically, the machine will not boot from a floppy with the new HD installed. If I remove the HD entirely, the machine will boot from a floppy and it will also boot correctly from the XP setup disk. It will also boot from a floppy with the old hard drive installed and it also boots from the CD with the old hard drive installed. I have sent the drive back to the seller and they tested it and said they could find nothing wrong. I tried installing the new HD about a half dozen times and it behaved the same way each time. I just went through this proceedure with another computer (replace old HD with brand new one), so I know how it is supposed to work. There is nothing I can configure in BIOS as far as the HD is concerned, and I have not been able to find anything that would indicate that I need to update my BIOS. My basic question is; why will the computer work with the old HD, but not a new one if there is nothing wrong with the new HD?