When trying to put e6400 on XP SP3 to standby, the screen goes black but I am not certain the laptop is asleep. USB device lights are still lit. When trying to wake the laptop, it will not wake up and if the screen simply went dark, it will not come on. I always have to push the power button and force a reboot.
View 1 RepliesI got a Latitude E6530 with an E-Port II a few weeks ago. In general it's great but I have had one annoying problem a few times:
The laptop is docked with the lid closed, and two external monitors, and an external USB keyboard and mouse connected. It's running Windows 7 Ultimate.
The laptop goes into standby after a few minutes of inactivity.
When I press the power button on the dock to resume from standby, the external monitors stay in standby mode and the mouse and keyboard don't power on (no num lock light or laser on the bottom of the mouse).
If I undock the laptop and open it, the screen stays off and it doesn't respond to keyboard or touchpad input, even after several minutes. However the power light is on and the hard disk light occasionally blinks. The only solution is to power off the laptop by holding the power button for a few seconds.
Note that this doesn't happen every time that the laptop is woken from standby, it's only happened 3-4 times in a month. The Windows logs don't show any errors either.
I have a late 2011 model XPS 15 that no longer wakes up from sleep or hibernation mode, at least only the screen doesn't. Â The computer will start up but the screen stays black, not even the backlight will come on. Â I can hear it working but nothing happens. Â
View 2 Replies View RelatedThe last day, I close the lid and the computer, theoretically, enters way sleep (or standby.).
On having turned to open the lid, the PC it was in StandBy but it does not wake up
I have tried all the keys, even I have turn off the laptop and turn on but it not wake up The screen is displayed black, without cursor, characters...no displays anything!
CD-Rom drive not runs either.
The laptop is in "sleep" eternally!
Does anybody have problems with standby or hibernation-function?
If my E6500 with XPprSP3 is switched to the standby-modus (via Fn+F1 oder by closing the cover) the screen stays black after wake-up with the power-button - and the system probably freezes
i installed W7 64-bit on my Z590 last month, and everything has gotten to perfect working order. The only snag I've run into is that waking the computer from hibernation takes an annoying long amount of time. On the scale of minutes, whereas a fresh boot-up from shut-down will take less than a minute, and wake-from-hibernation on my XP install before did the same. Does this happen to anyone else or is it just me?
Ignoring the whole debate on why-do-you-hibernate (I run several programs, especially photoshop and MATLAB, that I do not wish to close and lose temporary history data), is there any kind of remedy for this? It's annoyed me to the point that I just put the computer on sleep instead when necessary, which drains the battery. I've been hibernating my laptops for 7 years and I really hope not to have to change my habits. I know another friend with the same setup has this issue as well.
I just received my new Dell Studio XPS 13 with the integrated NVidia 9400G graphics and came across a somewhat annoying problem.
When I put my computer to sleep and shut the lid, then as soon as the lid opens, the computer wakes up from standby.
I dont want it to do this and would rather press the button manually......
Fresh load of Windows 7 x64 7229 and when I put my machine into standby the battery seems to drain incredibly fast....almost like it is on. I will standby the machine before I go to bed and in the morning it's dead with 0% battery.
I used to do the same thing with my D630 and in the morning I would have 85% or so on the equivilant 6 cell battery. Is there something I am missing.
I have a Latitude E6320, running Windows 7 SP 1 (64-bit). Â I have all the required and recommended patches installed. Â I generally use my laptop on a part-replicator. Â Recently, my laptop has been restarting when I hibernate my computer using either the on/off switch or the start button on the task bar.
View 3 Replies View RelatedMy D630 wakes up in he middle of the night fo apperantly no reason at all. The only program that is running is Outlook Express or maybe nothing at all.
Windows is password protcted so only the log on page comes up but it will download Emai messeges. How can I keep this D630 from waking up on it's own.
The price of 2nd user Latitude D630's seems to be holding up quite well in the UK. Does this indicate that it is still a popular machine and favoured over the E6400?
I briefly checked out an E6400 the other day and for a choice between machines of approximately similar spec I would opt for the D630 rather than the newer E6400.
I would be interested in opinions from users who have experience with both models.
I am wondering whether or not the E6400 has the Latitude-On feature or can be configured as such.
View 10 Replies View RelatedI'm pretty new to Dell notebook world. I was always told that Dell has a stinky customer service and their image wasn't that good around spot but care sharing whats good and bad about dell in general?
1- In the LCD option, it says touchscreen. Does that mean I can somewhat use this laptop like a tablet? ( Without the ability to twist the screen of course..)
2-Never knew whtas the different between 1dimms and 2dimms in RAM....
3-Compare Geforce 9400gs with the Mobile Intel® Graphics Media Accelerator X4500HD With PC-Card. Plus, what do they mean by "PC-Card" or "EXpress card" ?
4-Does Dell notebook actually give us 64bits windows or they're all 32bits unless they mention the option of 64bits?
5-Whats the difference between the normal e6400 model and the ATG model? Simply more durability +weight?
6- Whats an encrypted HDD or a ruggedized HDD?
7- I'll be using the notebook for design purpose. Such as photoshop, flash, illustrator or such. I'll be using 2-3 program at once with several picture/projet +internet + music. If my specs are 2.26ghz or 2.4ghz + 4gb ram + intel HD4500HD, will this notebook handle it?.............................
Its a certified refurb; it has everything i want at a great price:
-- Latitude E6400 Laptop: Intel Core 2 Duo P9500 (2.53GHz, 6M L2 Cache, 1066MHz FSB)
-- 14.1 inch UltraSharp WXGA+ (1440x900) LED Display
-- Back-lit Keyboard
-- Genuine Windows Vista Business
-- Brushed Metal Black
-- 24X CD RW/DVD Combo Drive
-- 2 GB DDR2 SDRAM 800MHz (1 DIMMs)
-- 90W AC Adapter
-- 9 Cell Primary Battery
-- 125V Power Cord
-- Mobile Intel Graphics Media Accelerator 4500MHD With Express Card
-- 250 GB Free Fall Sensor Hard Drive (7200 RPM)
-- Dell Wireless 1510 802.11a/g/n Draft Mini Card
-- Integrated Webcam with digital microphone
Im upgrading the RAM to 4gb, and maybe the hard drive if its too loud. I got the integrated GPU on purpose so it runs cooler and quieter and has better battery life (I don't play games). Ill try for a new version of vista too. Im happy i got the p9500, that was probably the only one left that was a decent price,
I have a simple question: is the E6400 able to use the 8 GB of RAM fully? I have read some threads here about chipset limitations etc.
Could those of you with the E6400 and 8 GB of RAM quickly check whether your 8 GB are fully usable by the system?
I'll be able to order my new E6400 soon, as follows:
CPU: Intel P9700 2.8GHz
GPU: nVIDIA Quadro NVS 160M / ExpressCard
HDD: (whatever is cheapest) I'll replace with a Scorpio Black or Blue (see question 5)
MEM: (whatever is cheapest) I'll replace with 2x2GB of Corsair DDR2-800
WI-FI: (whatever is cheapest) I'll replace with an AR9280 half miniPCIe card
LCD: WXGA+ (1440x900) LED-backlit
- Backlit keyboard, Bluetooth module, 6-cell battery
Keep in mind that I won't be running Windows on this machine, but instead, Linux (Arch Linux x64).
Questions:
1) Is the nVIDIA Quadro NVS 160M enough to run Compiz-Fusion smoothly?
I previously ran Compiz-Fusion with an Intel GMA X3100 integrated GPU and was underwhelmed. Everything worked, but the animations were pretty herky-jerky, most of the time. Aero animations under Windows 7 were similarly not very smooth. I'm hoping for more with the nVIDIA Quadro (I read one report that Aero with an E6400/nVIDIA wasn't very smooth).
2) How bad *really* is the touchpad?
I've heard reports that the touchpad is imprecise and laggy, but I've also heard from people who say they haven't had any issues. Is this a "hit or miss" situation with the hardware, or is it due simply to what people are used to? Or has this been fixed?
3) How durable is the lid/screen?
I've heard reports that "the E6400 is well-built and durable ... except for the display," with no real elaboration. Is there any truth to this? Bending, flexing, etc.? Screen distortions if pressure is applied to the back? Does it seem strong? Feel strong?
4) Does the "brushed-metal" on the back of lid look good in person? Or does it look cheap, fake, tacky, etc ... ?
5) Can I replace the hard-drive?
I heard from one owner that the hard-drives used in the E6400 use a non-standard SATA layout, and thus aftermarket hard-drives cannot be installed. That seemed like it would be a very stupid thing for Dell to do ... but I thought I'd ask.
6) After time (6-12 months), does the display start to wobble when open?
I had an Acer Aspire 4720Z (I know, cheap quality) whose display would wobble when open. At the top of the screen, probably about 1/2" to 3/4" of wobble. The Dell Inspiron 1521 I'm using now does the same thing ... very annoying. Does the E6400 exhibit anything like this even AFTER extended ownership? Say 6 months to a year or more?
7) Is the audio bad?
I've heard from a few people that the audio is simply horrid, even through headphones. I've also heard that disabling PC Spk has fixed it for some people ... is this an outdated issue that has been fixed by Dell?
8) Is there anything else I should know?
If there's anything else that I need to know, I'd love to hear it.
Sorry for so many questions, but this will be a big purchase.
After reading this thread: E Module Bay 2.5" drive.
about the possibility of a second hdd in the Latitude E Series I wonder if it is possible to use Raid0 with E6400 as mentioned in the manual.
Looking after it in the Bios I can't find any Raid Modus for SATA-Operation.
Any ideas???
I have been reading about people getting so many hours out of their E6400. I have the 9 cell battery and running the screen on the lowest setting, Bluetooth off and wifi on im getting close to 6 and a half hours of battery life. Is this normal....
I heard about doing a clean install, what does this do, and what benefits would i be achieving by doing this?..
Is there anything else i can do to get a little more juice out of the battery when i need it? I plan to have wifi on most of the time when it is being used. Basic web-surfing and Microsoft word...
I am trying Windows 7 on my Latitude E6400, and I am having two a little issue for the system.
First issue is despite enabling advance performance for the drive under Device manager, Windows 7 gives me score or 2.0, than in Vista the score is significantly higher in the 5.0 range. My HDD is the Hitachi 5400RPM 160GB.
Second issue is, I don't know what I missed when installing the drivers/software, but I don't have the on-screen volume control. But the ambient light sensor, brightness level and keyboard backlit mode, does appear.
Does anyone know if approx. 75-80 processes normal for the Latitude E6400 with Dell ControlPoint installed?
I can't believe it's that much--if it is the case.
Also, should I install the Vista 64-bit chipset driver? I see Dell doesn't have one for Windows 7 64.
I'm looking for a sleeve that is protective but not particularly bulky.
View 10 Replies View RelatedI am looking for a new notebook and I can't decide wether to buy the XPS 16 or the Latitude E6400.
I will need the notebook for both university (web browsing, office) and leisure purposes (watching movies, tv, listening to music).
I need a solidly built notebook as I travel every few weeks.
I just got a E6400 from outlet (well it will be here around the 17th). It has a Dell 1397 802.11B/G Wireless Mini Card but I want to get a wireless-n card.
Are there 3 antennas in the laptop still that would allow an upgrade to a Intel wifi 5300 card (assuming it can be found outside of the customization page)?
Is there anywhere cheaper than dell to buy the wireless-n part for the E6400? Dell only has the 5100 for $59.99 and haven't seen the 5300 in parts.
I have a Dell Latitude e6400, running MS Vista (latest SP2 + updates).
It is running Bios A14 (recent update).
My issues are:
1. Computer will start up and work normally. However, on shutting down and restart, it will not restart
2. The 'on' button flashes every few seconds as if the notebook is 'trying' to start up and the HDD light flashes every so briefly. This recurs indefinitely.
One video, talk more than millons of words
[url]
I hope its a problem of the LCD inverter, and not all the panel.
I purchased the Dell Latitude E6400 and was supposed to receive the WXGA+ 1400x900 LED screen. Under my device monitor hardware id it displays Cmo1436. Is this the correct LED screen or rather an LCD?
View 3 Replies View RelatedI know that they are two different focused machines, but now that the Studio XPS has been out for a little while, can anyone comment on how the E6400 and 13" SXPS stack up against each other?
Battery life?
Computer performance CPU for CPU?
Keyboard quality?
Quality of build?
Screen quality?
I am looking for a new notebook and after going through countless reviews I have narrowed my final purchase decisions down to two notebooks -
Dell Studio XPS 16 and Dell Latitude E6400. I am basically need a notebook for web browsing, business use and leisure purposes.
I received my Dell E6400 yesterday and need to take screenshots because I am writing training manuals.
My problem is that with my Dell D260 I could press keys on my keyboard ALT PrntScrn and capture the active screen.
With the E6400 there is only one option to capture screens and that is the Fn key with the F11 which is the PrntScreen button
I'm trying to switch out the processor of my E6400. When I put the new processor in and start the computer, the lights blink, sometimes the screen turns on (to black), but the BIOS never loads (or even starts). The computer then turns off, and the caps and scroll lock lights turn on, and the num lock light starts blinking.
Does anyone know what that blinking code means, and more importantly, why the computer isn't starting?