ok so my R17_N7110 Early 2011 Model will not charge? only turn on plugged in
NEW OEM Dell Power Port
New and OLD Power OEM adapter 90W and got some ebay one as well alll saying unknown and wont change even tryed re flashing bios and still lost..
Just purchased. During setup, notices battery icon shows connected, but battery not charging. I have pulled battery in and out several times, cleaned terminals, still no luck.
View 1 Replies View RelatedJust purchased. During setup, notices battery icon shows connected, but battery not charging. I have pulled battery in and out several times, cleaned terminals, still no luck.
View 1 Replies View RelatedYesterday my HP Support Assistant flagged me about two updates for my system.
Updates/Messages:
Atheros 2011 Wireless Lan Driver
This package contains the drivers for the supported Atheros Wireless LAN Adapters in the...
SoftPaq Number: SP52131 Version: 9.20Ap4 Size: 81.94MB
Atheros Wireless LAN Driver - Win 7
This package provides the Driver for Atheros WLAN Devices
SoftPaq Number: SP48755 Version: 1.00Ep1 Size: 20.91MB
I tried to download both with no success. Do I have the right drivers? Here's my computers details...
Product name: HP Pavilion dv6 Notebook PC - Windows 7
I'm trying to find info on an aspire... Not the model # itself as that is not the problem, but the sub model#...
The model is Acer Aspire 8930G, but the sub model # is 6963 and that is where my research seems to go dry... Does anyone have info on this sub model #?
Also i might ask is how user friendly is the 8930G for upgrades as for the processor and video? The current processor is the T5800 with the 9600m nvidia... Would it make sense to upgrade and what is the potential of this 8930G with the T5800?
I am currently running BIOS revision A5 on my 1340 which I bought in April 09.
I am re-installing Windows 7 64 bit following freezing problems and am considering updating to the current BIOS revision A11.
Under the 'Important Information' for the A11 BIOS at the the Dell download site, it says:
'2.This BIOS is for B02 chipset'.
SIW (System Information for Windows) on my 1340 reports:
North Bridge NVIDIA nForce 730i Revision B1
South Bridge NVIDIA nForce 730i Revision B1
I presume this is the chipset revision.
i have windows 7 64bit and can't get Bluetooth to find any device have updated driver and check every thing and it's still not work, when run dell diagnostic it's say all good but can't find my phone or any other device.
View 1 Replies View RelatedI have an early 08 MBP (non unibody) and I want to hook it up to my samsung HDTV to play movies. I have a DVI to HDMI cable that covers video and it works fine but so far that makes it work like a really REALLY big monitor. Since DVI doesn't output sound what do I use to get the sound to output to the tv as well?
Does this work?
[url]
I notice in one of the reviews one person states they used this to connect their MBP to their HDTV, I was just wondering if it would work for my model as well?
I just wanted to know if this is normal. In XP, my early 2009 macbook (check my sig) only downclocks the processor to 1.59GHz (from 2.0GHz) in power saver mode. My 2008 macbook (intel) would downclock to 800MHz (from 2.1GHz). That just doesn't seem right, is that normal? Just doesn't seem like much of a power saver to me.
View 6 Replies View RelatedI just got my 4GB crucial kit in today, 2x2GB 800MHz DDR2. Since the new white macbook update just came out (2.13GHz), and it reportedly supports 800MHz RAM, I decided to try and upgrade mine (2.0GHz model). I just wanted to report that my macbook recognizes it no problem, and reports the speed at 800MHz.
View 10 Replies View RelatedMy university had a brand new early-2008 MBP model (one left) for $1,399 so I bought it a couple of weeks ago. It has the 2.5Ghz processor, 2GB ram, 250GB HDD, 8600m GT w/ 512 vRam, and the matte display. I was trying to decide whether to buy a 2.4Ghz unibody MB, a 2.4Ghz unibody MBP, or refurbished of both. I went to talk to the people at the tech store and they showed me a brand new early-2008 model MBP (a design I happen to like more than the unibody because I am not a fan of the Sony chiclet keyboard or the new "no button" button touchpad) and I purchased it immediately.
So far I have been pretty happy with the purchase and the performance of the machine although it does get quite hot on its own. The main thing I am wondering about is upgrading the ram to 4GB and swapping out the hard drive for a 7200RPM one. The hard drive is less important to me as of right now because the higher RPM will cause more heat and drain the battery faster but what I DO want to do immediately is upgrade the ram.
The machine has 2GB PC2-5300 in it which is 667 Mhz. The bus speed on the machine is 800Mhz. I am wondering whether or not I can match the bus speed and install PC2-6400 which are 800 Mhz. If not that is fine I'll just go with PC2-5300 and pick up 4GB from Fry's today but running the faster speed would be nice.
On the hard drive front how exactly does this work? I know on a PC I can just swap out the hard drive and load a saved system image or install a new OS but does it work the same with Apple? If I swap the hard drive do I just pop in the install disks and install it?
I use Office:Mac 2008, and I'm not a fan. But it's better than OpenOffice/NeoOffice (imo), and while I like a lot about iWork, the occasional small incompatibility -- and the fact that saving as .docx as default is troublesome -- is irritating.
For those of you who have been Mac users since Office '08 was released, I'm just curious as to whether there's a reason to expect that we might see a public beta put out by Microsoft in the coming few months -- long before this Fall/Winter 2010 release or whenever it's supposed to be -- so we can get cracking on that.
My photography hobby is getting more complex than originally anticipated, so I now want to upgrade my HD from the standard 120GB to something bigger, since I only have about 10 GB left.
I have been looking at the WD Scorpio Black (320GB, 7k200, priced $89 at newegg and 150 on WD site), but was wondering if it would work with my MacBook (late 07/early 08) and if there would be any difference with the sales package from Newegg and WD own site..
Also I was wondering how the performance is, and if there would be any noticeable difference between the 320 Black and a 500 Blue (both WD)?
Also, what is the procedure, when upgrading? My present drive is backed up via TimeMachine (with all docs, pictures, music and apps).
I have an older Inspiron 6400 (looks like the 1505) that isn't charging the battery. The bios indicates that the battery is charging, and that it is performing normally. There isn't a red flashing battery indicator, but when the laptop is powered on there isn't any "green light" indication of the battery, either. The AC adapter performs normally ( Charger is a PA10 (90watt) and it works fine on my D800, and charges that battery normally).
What I don't understand is why the BIOS indicates the battery is charging and that the battery is performing normally. However, when I have the system up and running there isn't a green battery indicator light on the button strip. Let me clarify that statement. During the initial boot phase of start-up there is the green indicator light on the button strip, but as the OS finishes loading this light goes out and the battery doesn't charge.
Could this be caused by a faulty Bios update, or is it something with the battery charging circuit of the motherboard? The laptop operates normally when using the AC adapter, just no indication of the battery charging when the OS is fully loaded. OS is Windows XP Pro (SP3).
My Laptop is 1 year and 5 months old. There are 2 problems I am facing with my battery:
1) When it is charging, at around 86% level, it stops charging and I see an orange light blinking at the battery icon and it continues to blink unless I turn the power off and allow the battery to discharge for a while.
2) at around 45% to 50% level, the battery level suddenly drops to 7% level and then I have to charge again.
Because of these issues I now use my laptop as a desktop. It is always plugged in and I use the option of "Stop Charging" in the windows power settings. how to solve the problem.
I have had my Dell Inspiron 1525 for around two years. For the past month, when my power supply is plugged in, the battery does not charge. It has been stuck on 3% and will automatically shut down when unplugged.
I have seen that this is a very common problem, however, when hovering over the battery icon it says: plugged in, CHARGING, where as all of the other posts that I have seen say: plugged in, NOT charging.
I have tried taking the battery out and restarting but this did not work. I also drained my battery and tried to recharge but again, this did not work. My initial thought is that I may need a new battery but I just wanted to check first.
I have just encountered a problem with my Inspiron 7520 laptop. The laptop is plugged in and notes 'charging'. Problem is that it is not charging and battery has been at 0% for a week now.
Battery meter notes the battery is charging and that the battery is working normally. I have run the 'My Dell' systems test and it failed on the battery with error code WBT02-GX1...
I've tried everything
The charger light still works (The blue ring)
[URL] downloaded the latest bios launcher but it is asking for minmum 10% battery but i have issue with charging and won't work
also i've ran the bois for it to say the ac adapter is [Uknown]
i'd try everything ( Update usb drivers, update BIOS ... ) i did also the Dell PC Diagnostics, the result was that everything was working fine except when you have to plug something in every port to check if they detect something ... the first one (1.0) is detecting whit no problem ( grey if unplug ... blue if plug in) but the two other ones are already in "blue" but nothing is plug into it, and when i plug something, nothing happen !!
View 10 Replies View RelatedMy laptop has frozen while in hibernate mode on two occassions in the past two months. Though not a frequent occurance it is heart stopping when you have committed work to a customer and everything you need is on the laptop and not accessible.
The first time the machine was off. Opened the lid and pressed the power button and nothing - did not even light up the button. After no responses to any attempt to start the computer I removed the battery. Upon reinserting the battery the machine started working and everything was fine.
The second time the machine was off but left with the lid open. The power button was lit. No matter what I did there was no response - frozen again. Once again I removed the battery and upon reinserting the system again resumed working normally.
The only common thing is the laptop went into hibernate mode and would not respond to commands to wake up.
For the past week my laptop (which I've been using for only 3 months), running Windows 7, has been lagging. For Example, when I try to check my email using Live Mail, I click on a new email to read and it takes 20-30 seconds before the message loads. NOW it is not booting up. I try to start the computer and it goes to a black screen & says "Windows failed to start.
A recent hardware or software change might be the cause" so I let it boot in the diagnostic mode (I think that is what it was called, the only other option other than normal mode, but did not say Safe Mode) and it just goes to the blue background but no button to log in, or any way to do anything that I can see. I haven't loaded any new programs, I'm just running Quicken and Photoshop Elements, Mozilla, & Chrome and Norton anti-virus (courtesy of our Comcast internet service). Last night we tried to defrag the hard drive but that just sat at 2% for hours with no results.
Specs:
- i5
- 4GB
- cannot boot into Windows 7
I am working on a friend's laptop. Originally, the laptop had a bad power adapter. They heard a "popping" sound from what sounded like it came from the laptop itself. Laptop went dead. They bought a new power adapter but it won't even light up the LED's on the laptop itself. The new adapter definitely works.
Of course it's used for taxes, home business info, etc. So they ask me to look at it since I have 10+ years in IT and can do most PC repair stuff without batting an eye. Well, here I am. Laptop is not under warranty AND it's still being paid on as it was financed by Dell.
Here is what I did to troubleshoot:
1) Verified power adapter got power and works with another Dell laptop.
2) Verified laptop will not power on.
3) Removed bottom screws, plate, battery, etc.
4) Removed keyboard, screws, and top plate.
5) Found a lots of black markings on the motherboard, specifically at the circuitry near the battery port.
Determined it needed a motherboard and maybe other stuff but wasn't sure. Bought a new motherboard with a 90 day warranty from CHINA on eBay. Also bought a new keyboard since a key was missing and new fan since it was in rough shape.
The repair steps:
1) Removed old motherboard and took off heatsink and CPU.
2) Reseat CPU on new motherboard, added Arctic 5, Reinstalled heatsink.
3) Added new fan and buttoned everything up. Triple checked connections
4) THERE IS LIFE! Power supply now feeds power to the laptop as LED's are lit.
5) Power button is pressed, nothing on the video but the fan spins up and sounds healthy. No caps lock LED. Hooked up to a monitor DOES NOT WORK. No beeping, nothing. I figure maybe the CPU isn't working so I try reseating it.
6) Tear it all down again. Reseat CPU, new thermal paste, reinstall heatsink, button it back up. SAME THING. This time it's not fully reassembled.
I tried doing the D + Power Button to test the LCD. Looks like the screen does something, but it's dim and doesn't last long. I can't see if it tries to do anything in detail, but I notice a little bit of light omitted from the side. Tried discharging any static.
Normally, I would throw in another CPU or something, but I don't have spare parts for this laptop. How can I continue to troubleshoot this? Maybe a bad motherboard?
My Dell Inspiron 17 N7110 Keeps shutting itself down, recycling its system (I am sure I am using the wrong terminology). It will get to the dell logo screen and then go blank and restart itself. I spoke with someone at Techzilla who said that this has been happening to other people with this model. I removed the battery, tried hitting the F8, F11, F2 and F12 buttons. When I hit the F12 button the screen went to a black screen with a blinking curser in the upper right hand corner. This screen lasted about a second or two before it shuts down again and starts to recycle again. I was told that it's a software problem (that I downloaded a virus) but if others are having the same problem then I think it's a dell model issue not a software issue.
View 4 Replies View RelatedI recently purchased a N7110 and very nice it is other than the power cord being too short. However all was well and good when i got the machine, updated Win 7 from Microsift website and then noticed that the Bluetooth drivers where causing problems in device manager? have had no problems with connections but am being reminded that i need to reload the drivers. Nothing seems to be load when I try to download via the net.
View 1 Replies View RelatedI've bought 2 Inspiron N7110 laptops. Both have win7 64bit OS, and 2 usb ports (3.0 ports) are not working. I have all the latest drivers form dell's web page, but I can't get them to work. Is this a driver issue or this laptop series is affected by Chipset circuit design issue? Should I return them, or there is something wrong with drivers, and it can be fixed?
View 16 Replies View RelatedWhen i bought N7110 when i pressed the fn + sound up/down button(f11/f12) a little box would come up showing me what my current sound level is and dissapear after 3 secs or so. But doesn't happen anymore. The buttons still change the sound but the box doesn't show up. This happens with all of the fn functions like f2(wireless settings), mute button, f4 f5 (brightness), f3(touchpad on off). They all work but they dont show up. So if i want to close bluetooth i need to do it blindly by pressing f2 + fn a few times to finally get it.
View 5 Replies View Relatedso sometimes my laptop will just randomly beep twice then something clicks... It just does it randomly, sometimes when I turn my laptop off and just randomly when it's running. The beeps are short.
View 1 Replies View Relatedmy two-year old laptop (Inspiron N7110 Windows 7 64 bit home) s refusing to wake from sleep. The power button just glows steadily and nothing happens at all happens when I press it to try to wake it. I have to hold the power button down to shut it right off, then restart.
I did a number of updates before this happened, including:
-update Firefox
-update Garmin Lifetime Updater
-update Intel My WIFI to Intel Dashboard
-update drivers for Bamboo pen tablet
-update Norton antivirus software
-sign into Dell PC Checkup on Dell Support Centre and downloaded and installed all their recommended updates.
I did another Dell PC Checkup just now and everything passed.
I uninstalled the video driver then reinstalled it from the Dell site. The problem was not resolved.
Then I updated the BIOS from the Dell site. Problem still not resolved...but now I have a new problem in that it hangs at shutdown. I get the little twirly icon and 'windows is shutting down' message with no other activity or blinking lights for >10 minutes , until I lose patience and shut it down with the power button.
At the moment I am just not putting it into sleep.
I have Dell Inspiron n7110. In my notebook install Dell Wireless 1702 802.11b/g/n. Recently notice that I can not find any Wi-Fi network. But in Task Manager I see that Dell Wireless module is working properly. I reinstall all drivers twice, but it's still don't work and don't find any Wi-Fi network.
View 1 Replies View RelatedI bought a new Inspiron N7110 about 9 days ago and when I first got it, the dvd/cd drive worked fine and showed up in windows explorer. Starting yesterda, the drive does not show up and will not autorun. The drive does show up in device manager and no problems are listed.
View 1 Replies View Related