Dell :: Early XPS 1340 Which BIOS Revision To Use?
Jan 23, 2010
I am currently running BIOS revision A5 on my 1340 which I bought in April 09.
I am re-installing Windows 7 64 bit following freezing problems and am considering updating to the current BIOS revision A11.
Under the 'Important Information' for the A11 BIOS at the the Dell download site, it says:
'2.This BIOS is for B02 chipset'.
SIW (System Information for Windows) on my 1340 reports:
North Bridge NVIDIA nForce 730i Revision B1
South Bridge NVIDIA nForce 730i Revision B1
I presume this is the chipset revision.
View 8 Replies
ADVERTISEMENT
Nov 24, 2008
Please update to the revision immediately and post your results here. It seems importance is rated as Recommended and not urgent, so I'm not sure whether or not the system downclock and fan issues have been fixed, which is quite an urgent matter.
If someone could get a log file of the changes from Dell that would be great.
Update: Thanks Weegie:
Fixes/Enhancements
------------------
1. Added support for BIOS that is signed.
2. Updated to PSA build 4117.
3. Updated thermal table.
4. Fixed the issue where system is slow to boot to internal hard drive after failed PXE boot exits.
5. Fixed the issue where Some BIOS Setup parameters are not accessible with only the keyboard.
6. Fixed the issue where system will automatically shut down at resuming from S3.
7. Fixed the issue where the time of BIOS power event log in Setup is wrong for power button event.
8. Fixed the issue where presentation mode cannot be turned on/off from the DCP.
These things look sOoOoOoO important .
During the flash, the only thing that appeared was "Updating Keyboard Controller ROM", but I don't know if that's regular or not. I will be gaming with this new revision and posting results soon.
All in all, nothing to see here. Seems like Dell either a) does not read our threads, or b) does not care. Nothing to see here .
View 10 Replies
View Related
May 23, 2009
I downloaded it but didn't see any noticeable changes in the temps and whatnot.
View 3 Replies
View Related
Feb 10, 2009
Last week I received my brand new Dell Studio XPS 1340. After some days I got the "Power Adapter cannot be determined .....". So I called Dell Tech Support. He told me to flash the BIOS from A02 to A03. So I did. Under the flashing I got a bluescreen. So the information on the BIOS was gone. So yesterday a Dell Techincan came to my house and replaced the motherboard with a new one. I noticed that this motherboard has BIOS version A01 (the oldest one). I also noticed that the processor fans is always on 4000 RPM. It never slows down to 2000 RPM, even if the temperature is on 40 degree celcius.
So I though this had to be something with the old BIOS version. So I called Dell, and I tried to flash from A01 to A02. But the same bluescreen came, this time, lucky for me, before the flashing! So nothing get destroyed!
Anyway, Copy paste the dump file here:
Seems like PHLASHNT.SYS has something to with this? Have someone have this same problem as me? The fans never stop, and I think its because of the old bios version. And:
1) No errors on the diagnosic test (full system scan)
2) I switched from Vista 32 bit to Vista Business 64 bit (original) with the signed drivers from dell.com (all my drivers are verified)
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 0000000000000081, MmMapLockedPages called without MDL_MAPPING_CAN_FAIL
Arg2: fffffa800b7a5120, MDL address.
Arg3: 000000000000008a, MDL flags.
Arg4: 0000000000000000, 0.
View 10 Replies
View Related
Dec 8, 2009
I hope I am using the right part of this forum to ask this... Heres my problem: I bought new Dell studio XPS 1340 (CPU: I Core2Duo T9300, GPU: GeForce 9500M (GF 9400MG + GF 9200MGS, HDD: 320GB, 7.2k, RAM: 4GB)
and I had some troubles configuring my graphic cards in SLI mode. I read somewhere, that BIOS upgrade from A07, which I have, to A11 will help with this problem.
I downloaded A11 BIOS update, but the setup wont recognize my current BIOS. When I load into the BIOS I see, that its really rev. A07, also it has header from Dell inc.
View 10 Replies
View Related
Apr 21, 2009
the new dell studio 15 has a option fora 900p screen. this prob means a 1440x 900 screen but it just doesn't make any sense calling it 900p. it even confused me..
View 10 Replies
View Related
Mar 28, 2013
I have a Dell Studio XPS 13 (1340) and when i switch it on the power lights etc come on and the screen is blank. After a while it shows the Windows desktop and the laptop is ready to use but I cannot see the DELL logo at start up or am I able to get into BIOS. However when I plug the laptop to an external monitor it displays the LOGO properly and I am able to get into BIOS.
View 1 Replies
View Related
Oct 22, 2009
I have a final revision pre-configured VGN-SZ780DN (Canadian model Made in Japan). It comes with Vista Business 32bit RTM (not even SP1). I was shocked this morning to check on the eSupport Canada website and find out that my model is not supported by Sony for a Windows 7 upgrade!?! I mean, I thought the earlier SZ models probably wouldn't but I figured that for sure the final line of SZs would be as they are pretty recent, as I only brought mine on clearence for a real good price this year in March for $1100 CDN.
So, if I get Windows 7, I just want to make sure that everything works 100% and I will do the simplest straightest upgrade possible. Windows Vista Business RTM 32bit upgraded to Windows 7 Professional 32bit.
I already have my computer flashed with the latest BIOS and Bluetooth firmware from the eSupport site. Now, if I reformat my computer to ensure that it is all clean with the Sony recovery, remove crap like Norton 360, Google toolbar, Spybot Search and Destroy, install ALL the latest driver and software updates from the eSupport site for Vista then upgrade to Windows 7 Pro 32bit, how will things be?
View 6 Replies
View Related
Apr 4, 2009
How long it takes to Apple to relase updated version of new unibody macbook 13
Looking for new laptop. This new Mac is perfect for my needs but after playing a bit with it display its a dealbreaker . There is Pro but it seams a bit to pricy.My hopes ar that they would place a better quality display in future models. Likely to happen?
View 10 Replies
View Related
Jan 4, 2015
ok so my R17_N7110 Early 2011 Model will not charge? only turn on plugged in
NEW OEM Dell Power Port
New and OLD Power OEM adapter 90W and got some ebay one as well alll saying unknown and wont change even tryed re flashing bios and still lost..
View 2 Replies
View Related
Jan 8, 2015
i have windows 7 64bit and can't get Bluetooth to find any device have updated driver and check every thing and it's still not work, when run dell diagnostic it's say all good but can't find my phone or any other device.
View 1 Replies
View Related
Jul 14, 2009
I have an early 08 MBP (non unibody) and I want to hook it up to my samsung HDTV to play movies. I have a DVI to HDMI cable that covers video and it works fine but so far that makes it work like a really REALLY big monitor. Since DVI doesn't output sound what do I use to get the sound to output to the tv as well?
Does this work?
[url]
I notice in one of the reviews one person states they used this to connect their MBP to their HDTV, I was just wondering if it would work for my model as well?
View 3 Replies
View Related
Apr 27, 2009
I just wanted to know if this is normal. In XP, my early 2009 macbook (check my sig) only downclocks the processor to 1.59GHz (from 2.0GHz) in power saver mode. My 2008 macbook (intel) would downclock to 800MHz (from 2.1GHz). That just doesn't seem right, is that normal? Just doesn't seem like much of a power saver to me.
View 6 Replies
View Related
Jun 5, 2009
I just got my 4GB crucial kit in today, 2x2GB 800MHz DDR2. Since the new white macbook update just came out (2.13GHz), and it reportedly supports 800MHz RAM, I decided to try and upgrade mine (2.0GHz model). I just wanted to report that my macbook recognizes it no problem, and reports the speed at 800MHz.
View 10 Replies
View Related
Mar 1, 2009
My university had a brand new early-2008 MBP model (one left) for $1,399 so I bought it a couple of weeks ago. It has the 2.5Ghz processor, 2GB ram, 250GB HDD, 8600m GT w/ 512 vRam, and the matte display. I was trying to decide whether to buy a 2.4Ghz unibody MB, a 2.4Ghz unibody MBP, or refurbished of both. I went to talk to the people at the tech store and they showed me a brand new early-2008 model MBP (a design I happen to like more than the unibody because I am not a fan of the Sony chiclet keyboard or the new "no button" button touchpad) and I purchased it immediately.
So far I have been pretty happy with the purchase and the performance of the machine although it does get quite hot on its own. The main thing I am wondering about is upgrading the ram to 4GB and swapping out the hard drive for a 7200RPM one. The hard drive is less important to me as of right now because the higher RPM will cause more heat and drain the battery faster but what I DO want to do immediately is upgrade the ram.
The machine has 2GB PC2-5300 in it which is 667 Mhz. The bus speed on the machine is 800Mhz. I am wondering whether or not I can match the bus speed and install PC2-6400 which are 800 Mhz. If not that is fine I'll just go with PC2-5300 and pick up 4GB from Fry's today but running the faster speed would be nice.
On the hard drive front how exactly does this work? I know on a PC I can just swap out the hard drive and load a saved system image or install a new OS but does it work the same with Apple? If I swap the hard drive do I just pop in the install disks and install it?
View 10 Replies
View Related
Jan 16, 2009
My photography hobby is getting more complex than originally anticipated, so I now want to upgrade my HD from the standard 120GB to something bigger, since I only have about 10 GB left.
I have been looking at the WD Scorpio Black (320GB, 7k200, priced $89 at newegg and 150 on WD site), but was wondering if it would work with my MacBook (late 07/early 08) and if there would be any difference with the sales package from Newegg and WD own site..
Also I was wondering how the performance is, and if there would be any noticeable difference between the 320 Black and a 500 Blue (both WD)?
Also, what is the procedure, when upgrading? My present drive is backed up via TimeMachine (with all docs, pictures, music and apps).
View 10 Replies
View Related
Apr 4, 2009
I configured a SXPS 1340 for $1334 with LED and 9500M. THe BB XPS1340 is similar but with a CCFL and 9400M for $900. Is it worth the $434 difference?
How bad is the heating issue with the 1340?
View 10 Replies
View Related
Oct 6, 2009
Just kind of curious what people are using their xps 1340's for.
video editing, photo shop? just surfing the web, movies?
Anything specific that you find this laptop good for?
View 10 Replies
View Related
Feb 20, 2009
I just ordered a XPS 1340 fully loaded P9600/LED/4GB/Nvidia 256/256GB SSD/BT option.
I used my Dell credit card (logon to Dell.com/DPA5PERCENT)(evalue code 6M278-DYPDFP1)to get 5% plus a $150 gift card.
I started with a chat then they called me. After humming and hawing the rep was unable to to a better deal than my saved cart. I said thanks anyway but its out of my budget.
View 7 Replies
View Related
Jan 21, 2010
Is it true that XPS 1340 has a lot of problems? I was thinking about buying x1340 but many people including this forum are complaining about heat problems, fan noise and other hardware failures
View 5 Replies
View Related
Apr 15, 2009
well i have a dell latitude e6400 from the outlet and all of a sudden a ton of xps 1340s came in stock and i got a good one and im debating on whether i should keep i buy it or not and return my e6400.
so i was wondering how do u guys like it? how long does the 6 cell last and does it overheat alot? and do u personally think its durable and will last as long as my e6400?
View 5 Replies
View Related
Aug 14, 2009
I just talked to dell via a chat and they said that I cannot upgrade to anymore then 4GB of ram which I currently have. I looked at the specs on the build site and the Ram are all SDRAM at the same 1067 MHz. Am I missing something?
View 6 Replies
View Related
Feb 9, 2009
I just bought this new laptop and it froze on me during inital set up and dell had to reimage it on the phone with me. Now that I have it where I can use the machine after about an hour of web surfing it seems like the bottom is pretty hot and near the vent is so hot you could not hold your hand there. I was thinking of calling dell back and talking to them about it. Are other people experiencing a lot of heat with this computer?
View 10 Replies
View Related
Sep 8, 2009
I own a studio xps1340 with intel (p8600) 2.4 core 2 duo.
I want to upgrade my processor but i dont know if there are any faster than
p9700 (2.8).... Whats the fastes processor with most cache available for xps 1340 motherboard?
I see the 1640 models have option for T9900 (3.0ghz) will this one fit my motherboard sockets or not?
View 10 Replies
View Related
Dec 12, 2009
I get how to do it, but what do you guys recommend settings wise and what program should I use ?
View 8 Replies
View Related
Oct 26, 2009
I have an XPS 1340 on order, with the g210m graphics card. I have been reading about this computer, and while performance seems good,
I am starting to freak out a little bit about the heat issues people are reporting, even recently and with the new g201m.
I owned a laptop once with heat issues, and I don't want to go back to the bad old days of lockups and crashes related to heat.
I am thinking of canceling my order (or returning it if I can't), and getting the Vaio SR with the HD4570 graphics card.
What do people think of this as an alternative?
I lose the backlit keyboard and small amount of potential graphics performance, but also lose heat issues, fan noise, and potential problems related to the SLI configuration.
View 10 Replies
View Related
Mar 31, 2009
I think I have decided to purchase a Dell Studio XPS 1340, as I require a new laptop before the end of June and I'm not sure anything better in this class will be available before then.
I will be using it for a bit of everything, including work, portability, hooking it up for presentations, general surfing on the couch and some minor game playing. I have a few questions about purchasing it.
1. CPU. At the moment both the P9500 (2.53GHz) and the P9600 (2.66GHz) cost an extra $388.30. Shouldn't the P9600 cost more than the P9500? Am I missing something here?
2. Screen. I get a lot of glare on my current laptop at work. Does the XPS 1340 have a glossy or matte screen? Does choosing WLED or CCFL have any effect on this?
3. Deals. There is currently a $150 cash off deal which ends tomorrow (Thursday). This seems like a pretty good deal to me.
Should I take this or is there a high likelihood a better deal will be available soon? I will also be using the EPP code as I'm a full-time student.
Are there any other coupons I could use? In addition to being a full-time student, I am also a small business owner (strange combo I know), and have bought Dell desktops for employees in the past. Would I be able to get a better deal going through a small business sales channel .....
View 10 Replies
View Related
Jun 27, 2009
I'm really debating on which laptop to get, since I've heard a fair share of both good/bad reviews from both models.
I'm not really a heavy gamer, just a little Counter-Strike 1.6 and WarCraft III.
I was looking for portability with the 1340, but the aspect of full 1080p on the 1640 keeps pulling me back!
I'm just worried that the 1640 will be too big for me to be considered "portable" and more of a desktop replacement. .
View 8 Replies
View Related
May 2, 2010
I have read threads about Skype and windows 7, Skype and Dell XPS 1640and IDT codec sound drivers having issues.
I have an XPS 1340 with IDT for sound software, I have had my machine running good for about a month now, after I did a complete system restore 3 times.
So, I was wondering can anyone recommend a Skype version that is pretty friendly with the XPS 1340. or can I use the IDT drivers for the 1640 that I read about working with Skype
View 5 Replies
View Related
