That's was Dell's Diagnostic's (F12) tells me about my Studio 1745 - and no other errors are found. I'm assuming it's has a fried hard drive but how can I be sure before I buy a placement hard drive and install it?
Came to a point when I should completely restore the OS on my Acer Aspire 4752. Neither through Alt+F10 nor through eRecovery am I able to get around a Notice with the following "please complete operating system setup process before doing system recovery". There is only one option of this notice, that is to ok it and then the current Windows 7 Home Premium OS starts and I am not able to get out of this viscous circle. The OS works and is completely set up, so I do not understand what am I prompted to do. I see a number of postings out there, but no solution. Local Acer does not seem to know anything about the problem nor it's existence.
I have a hp envy m7j010dx with windows 8.1. it came preinstalled (windows 8) on a 1 tb hdd. I recently purchased a samsung 840 pro 250 gb ssd that i wouold like to make the system drive and make the original drive my data drive. confused on how to do so. want it fresh not clone. all i can find is restore or backup stuff. i just want to put the original computer on the new drive.
i have got an extra internal HDD which is 250gb. so i m planning to install some other operating system just to see how they work. like linux. where can i get the driver if i want to install Linux. and what about Linux Operating system.
I have an XPS14 from the Dell outlet (UK) which means it was pre-configured. The machine has a 500gig hard disk and a 128 ssd. I was surprised to find the o/s on the large hard disk and intend to move it. Is there anything special I should take into account (dell partitions/drivers) when I do this. As I don't have windows disks I intend to clone the system disk.
I have an XPS 14z, which has been owned for a mere 10 months. And well, yesterday I went ahead and formatted and re-installed the Windows 7 64-bit Operating System. It seemed to install fine and booted to the desktop. I then had to leave the house to run some errands, so I shut the laptop down. When I came back, I went to turn on my laptop. The Dell screen popped up, but then right after appeared a black screen reading "Operating System Missing". And well, I have been at it trying to fix this issue all day long! I have already ran the diagnostic tests, and they all were passed. So far I have tried the following to no avail:
1.) Booted Windows Disc --> reinstalled Windows = Same Problem
2.) Booted Windows Disc --> "Repair Your Computer" --> "Command Prompt" --> after "X:Sources>" typed in "bootrec /FixMBR" and "bootrec /FixBoot" = Both said successful, restarted, only to run into same problem
3.) "Command Prompt" --> after "X:Sources>" typed in "chkdsk d: /f/r" = "failed to transfer logged messages to the event log with status 50"
4.) "Command Prompt" --> after "X:Sources>" typed in "bootrec /rebuildbcd" = "Successfully scanned Windows installations. Total identified Windows installations: 0 The operation completed successfully."
My friend recently purchased Inspiron 15R 5521 with Windows 8(64Bit) OS. Can he downgrade the OS to Windows 7(64Bit)? as he has some issues with certain software, which according to the developers won't work on Windows 8. Will the warranty be void if the system is formatted and Windows 7 is installed. Is there any option to go in for a dual boot with Windows 8 and Windows 7. As per the support center, they do not recommend dual booting on a Windows 8 system.
I have always bought Dells but am leaning more towards HP and am baffled by the fact that the CSR says I cannot get a laptop with an operating system disk for use with the laptop I am purchasing. I would gladly pay a fee for the disk as I have when I have purchased my Dells.
Is there any way (other than just purchasing the operating system outside of the the HP purchase) to have HP include a oem disk with my purchase?
I have a dell 7720 laptop, which I would like the Windows 7 install on a SSD msata. I set UEFI, everything is OK, it loads the installer, run the install halfway, and it's the first reboot, the BIOS can not find the half-installed Windows, and start over again ... I have tried everything, I have the BIOS is re-installed. Windows 8 is also doing the same.
The funny part about it the same way I did two months ago and everything was fine, the machine worked, I just wanted to make Windows 7 the next and 8 easyBCD replaced with the sequence, and then he died doing it every since.
Maybe this program (easyBCD) I reached into the BIOS to do a bios update bios reset and not restore? If you do not install uefi, but then a traditional HDD for no reason, and the SSD is not uefi does not work.
I think the BIOS is going to be something, because I see the following installation to set up the UEFI, and partition, but the BIOS does not recognize (ran half the installation and over again to start because UEFI boot is not displayed you installed.) If you set it that boot device is added, it will print that you can not find a file system, but if I turn off the traditional boot then you will find the first installed unfinished Windows, you add the boot list, and then I went to the BIOS settings, restart, and again, you do not see your operating system. (none of what I just set it boot list)....
I have Inspiron 14R N4010. Its 2 years old. Its Toshiba hard drive(320 Gb) crashed 8 months before so I bought new WD hard drive(500 Gb), which also crashed again 2 weeks before(OS drive had bad sectors apperently) . Hence i got it replaced by WD for a new 500Gb hard drive.
Now, when I am trying to install OS in my new hard drive, i am getting following error:
after learning about possible mistakes by reading some forums
1) I checked that hard drive is installed properly, all connections are good. 2) DVD I'm using to install Window 7 is bootable one & i have used it before 3) BIOS settings are checked to boot fromCD/DVD drive. (It is not booting from network adapter which supposed to be reason for ethernet error as per many other forums) 4) I tried draining current by pressing power button for 20 sec to reset settings.(I read in some forum) but even that didn't worked.
BIOS is detecting hard drive...so that is also not issue. Could new hard drive be damaged? should i get this new one also replaced again? I need some way to confirm this before me sending it back to WD.
In one microsoft forum, I read for same problem
"update the basic input/output system (BIOS) to the latest version by contacting the motherboard or computer manufacturer and check if it works.Important: Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.
I have an inspiron 1545, and recently a message that said "missing operating system" appeared when I booted it up. I tried pressing f8 and control+f11 but neither of those work. I also tried reinstalling my windows 7 but after it says "starting windows" it just goes to a black screen with a curser. I'm willing to restore it completely if its nessecary.
I recently had to reinstall my operating system. Upon returning home I attempted to down the Touch Pad.exe and the message I get is this download from Dell can't be downloaded to my Inspiron 1721 operating system.
I got a Sony VAIO VGN-SZ330P for free. It is about three years old and the manufacture date is late 2006. The problem is that on startup I get the above message. I took the drive out of the computer and hooked it up externally to my pc and was able to read and write to it. Because of this I would have to think the HD is OK. When I put it back in the laptop it does not spin and the bios does not see it. I am thinking a controller or mobo or a disconnected power cable inside. It is a SATA drive with a single combined power/data connector.
I have to swap out the current hard drive on my old Power Mac G5 because it's become unreadable. I've decided on the hard drive to replace it, but I have no idea how to go about installing the operating system. Moreover, my Power Mac G5 came with 10.3.5 Tiger, so is it safe to upgrade to Leopard even if I have older components?
This laptop shows "no operating system found" when I power up. I ran knoppix which works but I tried pressing F8 to get to the CMD prompt but it doesn't work, I can get into the BIOS, anything I can do in the bios to do either a system restore or run the recovery?
I recently bought a HP Pavilion DV7, Product Number : LW174UA#ABA, from my friend and decided to install a new operating system onto it. My buddy didn't tell me much about what was wrong with it, other than it ran a little slow. I figured that it was cheap enough and I could easily throw Windows 7 x64 on it, instead of using Windows 8.1 x64 which he had installed on it a while ago, and use it as sort of a backup to my desktop.
I installed a new copy of Windows 7 Professional x64 on it and when the installation was complete I noticed I could not access the internet nor use the usb drives. I went into device manager and discovered that a handful of decives had the warning yellow triangle explanation symbol next to them. I quickly looked at the problem and noticed most of them had Error Code 28. This told me that I will need to install the drivers for the parts.
Okay, that shouldn't be too difficult. I found the WiFi driver and installed it. The issue was solved (temporarily) and I could access the internet.
After searching through forums I found out that my usb problem can be many different issues. I then came to the conclusion that a service pack update (since I could not find any usb drivers) should fix the issue. Nope, the usb drivers still have not been properly installed. On top of that, the internet now truns on and off. I will have access for a few seconds and then my computer tells me that I do not have any conntections.
I already went to the HP drivers site and installed most of the drivers. Things like the finger print scanner I am not too concerned with at this time so I skipped over those.