Strange problem with external monitor,
May be someone can help me with this one. When I'm connected to external monitor with "regular vga" cable. The monitor has some strange flickering. Like on old CRT monitors with 60Hz.
It's not that bad, but really annoying. Any comments on it?
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies View Relatedi dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
Has anybody ordered one yet?
View 10 Replies View RelatedIs there any way to use an external monitor with the XPS 13. It would make working with photos on the road much easier.
View 3 Replies View RelatedI'm looking to purchase a external monitor for my Studio 15
What the maximum resolutions that my laptop will support? I was told that it will support 1920x1200. I just want to double check that
When I hooked up an external monitor to my E6400 laptop only narrow range of resolutions were available.
The required resolution was not listed.
Do I need to get some drivers to solve this issue?
Right now my internal screen listed as generic pnp monitor.
I have the WXGA+ monitor
I was wondering if anybody else is having issues with using 2 external monitors with their M6400?
My configuration:
I have a M6400 Covet, FX3700M, 8GB, Vista Ultimate 64, A01 BIOS, updated drivers... connected to an E/Port Plus 210W Port replicator. I have a 24" Dell 2405FPW external monitor connected to display #1 (1920x1200) and a 19" 1908WFP connected to display #2. (1440 x 900). Both are connected via DVI connectors.
My problem:
The secondary monitor never has problems... However, the main monitor (24" @ 1920x1200) goes all crazy. It has red "dots" that appear all over the screen in dark areas. The bottom of the screen sometimes has horizontal bars. I see red and black vertical bars as well. The screen constantly flickers and the image hangs off the edges many times. If I change the resolution to BELOW 1440 x 900 the screen looks fine. Anything over 1440 x 900 goes crazy. (none of this occurs when using the LCD on the laptop itself)
The 24" monitor is fine. I have swapped cables and they do not help. If I plug up my desktop computer to the montior- it is perfect in 1920x1200. If I plug up my old Dell Precision M90 using it's old E/Port docking station- it too works fine in 1920 x 1200. So it's not the monitor.
Dell support doesn't know what the problem is. They say it's probably a driver issue. (I have the latest driver) They say they will contact me in the future if there is ever a solution and they are going to escalate it to their video hardware team.
Is there anybody else out there experiencing the same issues as me?
If you are running dual monitors successfully with the E/Port Plus 210W, what monitors are you using, at what resolution and what connector? (DVI or that new display port thing) If you aren't using the E/Port Plus 210W- what docking station did dell sell you?
I need to get a resolution to this ASAP.
I've attached two photos taken from my digital camera showing the screen issues.
I am about to take delivery of an XPS M1330 with the 128MB NVIDIA GeForce 8400M GS graphics card. When at my desk, I am looking to use the laptop with a Dell 19-inch Widescreen LCD Flat Panel Monitor [url] I am hoping to use the external monitor at the same time as the laptop monitor (for example, Outlook on one screen and Internet Explorer on the other).
- Is this possible? Does the graphics card support multiple monitors / dual view in this way?
The XPS screen resolution is 1280x800 and the resolution of the external monitor is 1440x900.
- Will the fact that the screens have different resolutions cause any problems?
I recently purchased an XPS M1330, with:Intel Core 2 Duo Processor T8300 (2.4GHz/800Mhz FSB/3MB cache)Intel Integrated Graphics Media Accelerator X31004 GB DDR2 SDRAM 667MHz (2 DIMMs)Genuine Windows Vista Home Premium
I'll mostly use it for AutoCAD, SketchUp, etc.
I want to purchase a monitor, but I'm not sure about a few details:What's the difference between buying a laptop with an HDMI entry, versus just buying one with a DVI entry (which seem to be cheaper), and get a HDMI-to-DVI cable?What's WXVGA and all those 5-letter-acronyms
I am not sure if this is a dumb question or not but I was wanting to get an external monitor for my XPS M1330. It has the nVidia graphics card. Is there a limit to the size of monitor I could get.
View 3 Replies View RelatedI have a problem with my dell e1705 laptop. I was trying to set up an external monitor, after installing the drivers that came with the monitor i couldn't get the laptops internal monitor to start back up. I tried restarting with the external monitor unplugged but the laptops screen just glows with no picture. can anyone tell me how to enable my internal monitor? Only the external monitor shows up when i try to switch displays in the nvidia controlpanal.
View 15 Replies View RelatedI just got my new XPS M1330 With 128MB Graphic Card.
Now when i connect to my XPS M1330 with my External Monitor (Dell 24" 2408WFP) Resolution: 1920X1200
I don't see good sharpness in fonts and image. I have set native resolution that is 1920X1200
I also have Inspiron 1720 (256 Mb Graphic Card)
There its show very fine and sharp fonts and pictures.
I use VGA cable in both the systems.
Now when i talk to Dell Teach Department.
They gave me few reasons as below.
My laptop screen is 13.3" and Monitor screen 24" (i know this is silly reason ) (but i argued with him and then he gave me 2nd reason)My XPS M1330 have lower graphic card (128MB Geforce 8400M GS) that is the reason i can't see clear display. To see clear sharp text and images i need batter graphic card (more then 128MB).
so he said he can't help me. It is not problem of XPS M1330.
Does anyone of you using XPS M1330 with 1920X1200 Resolution?
Looking for a bit of information, Ive had my M1730 for about 1 1/2-2 years its been preety good (had to replace the PSU) no real problems. I have taken it apart a few times to clean the fans.
Just today I noticed something when I went to plug in an external monitor I only have 1 GPU core.
I only play wow casually and use it for design/work so I haven't noticed the FPS drop lol. I installed new nvidia drivers 3 weeks ago and at that time I had SLI so I must of lost one of my GPUs in that time span T.T
I have re-installed GPU drivers.
I've been reading this forum for a while just havent had a reason to post until now. I got my Studio 1735 in September with an ATI 3650 video card.
Recently i've started using an external monitor also from dell. Rather annoyingly every so often the screens start flickering and it says that the video driver has failed.
After that I get the BSOD. I've tried updating to the newest video drivers on dell site and it didnt change anything.
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook
I've had Windows 7x64 running on my E6400 (w 160m) for 4 months now and frequently use an external monitor (Dell E207FP widescreen 1680x1050).
Up until a few days ago, I could plug the monitor in and it would correctly and automatically scale my desktop to the native 1680x1050 resolution.
All of a sudden (with no driver updates on my part) I can no longer scale any output to this resolution via VGA cable.
I examined the device manager and found that the video driver date was not the Oct09 driver I had expected, but instead something from Jun09. Updated the driver to the most recent dated Dec-14-09 and I am still having the same scaling issue.
I did a search for my problem but I couldn't find anything useful. So here's my problem...
I have an XPS M1210 laptop and I have a Sharp 32" 1920x1080 display. When I connect the laptop to the Sharp the resolution max's out at 1600x1200, regardless if i'm in Single, Clone, or Dual Screen mode .....
Just a few coke drops spilled on the upper right side of the keyboard. Right around the backspace key.
At the moment it happened, the lcd starts flipping out, eventually turns solid white, then shutting down.
Did a complete disasemmble and cleaned every piece with contact cleaner. The laptop functions 100% now....except one small irritation..
The screen goes black at random. Sometimes 30 seconds after boot...sometimes 5 or 6 hours...The Power indicator, baterry light and wifi lights all stay on green as if the computer is still running. I have to hold the power button down to shut it off and it reboots with the desktop recovery white screen.
Just got this m1710. Has 2.13 cpu, 100gb, 7950gtx, 4gig.
Bought it cheap cause the monitor wasn't working, but would work with external monitor.
Reinstalled xp sp3 without format and started installing driver from dell for bios, chipset, system utilities, system firmware, network, audio, video(which didn't seem to work) and input devices.
At some point during one of the installs and I'm pretty sure it was one of the dell installs not windows updates, that the monitor just popped on and was working. So, my figured ok it works I will now format the drive and do it all over again. Well, didn't work that way. I installed everything again, but the monitor doesn't work now and if I try to install nvidia drivers the computer freezes at some point.
I hope I'm just missing some driver or order or something.
I'm assuming everything works, because like I said it started working and kept working till I started all over.
I want to buy an external monitor for my sony z590. I was wondering what resolution the graphics card on the laptop can support. I want to maintain the same 16:9 aspect ratio, so i'm looking at monitors with 1600x900 or 2048x1152.
Does anyone have any experience with this? The only reason I'm looking at the 2048x1152 is because I want to have the same clarity and sharpness on the monitor as I do on the laptop screen.
I'm on the lookout for external monitors (20-24" WS) that work well with MBPs (13" 2.53 model in particular). I'm leaning away from Apple Cinema Displays (due to their lack of support for non-Apple computers which I own. Pl. correct me if I'm wrong in doing so).
View 10 Replies View RelatedI've hooked my Macbook Pro 15" to an external Dell monitor, keyboard and mouse and everything seems to be working fine - I can put the laptop to 'sleep', then wake it up via the external keyboard and then use the external monitor as the main monitor with the laptop screen 'asleep'.
All working fine, but only when I'm using the power adapter. If I try and run from just the battery the laptop keeps going back to sleep. It 'wakes', but after a couple of seconds goes back to sleep.
I'm a fairly advanced computer user (CS degree, etc), but I've had a horrible time trying to find a reasonably priced laptop that will run a 30" external monitor at 2560x1600.
I finally decided if a an output other than DVI-D would work. I found the XPS 16 which looked like a really sexy laptop, and I checked to see that the the 4670 supports 2560x1600 in theory, and that the DisplayPort to DVI-D would work in theory. I found two other posters on a non-computer forum who said they ran 2560x1600 off an XPS 16.
I tried to verify with Dell that DisplayPort would support 2560x1600 with a DisplayPort to DVI-D adapter. I finally found a sales person that sounded reasonably intelligent, and had him contact tech support to verify that it would do so.
So, I started my XPS 16 a little over 24 hours ago, and the the reported resolution from the monitor is 1280x800, and I haven't found a way to override that in Catalyst. (and no, I wouldn't be happy with using a 1080p 12xx by xxxx resolution)
I've spent over an hour on the phone with tech support and can't get anyone that even seems to comprehend the issue (Are you sure your monitor supports that resolution? Is it turned on? Has it worked before at that resolution? etc.)
I THINK an issue is that the monitor is seeing the connection as single link DVI and so only reporting 1280x800, but I don't know....
Last week I bought a 22" LG W2261V external monitor for my dell m1330 with Nvidia 8400GS.
After about 10-20 minutes of viewing a HD movie my CPU usage burst to 95-100 % and won't go down unless I unplug the external monitor. I checked this with another external monitor and the result is the same.
BTW of course I view HD movies all the time before I bought this external monitor without any problem.
I tried with vista 32-bit and windows 7 64-bit but no good.
I want to purcahse a dell 24 inch flatscreen external monitor for my dell xps 1530 just becasuse I feel like staring at a bigger screen .
This one I am looking at is full HD at $349AUD from dell outlet australia.
Will never get full HD as I dont have a blueray player installed. Any way , will this work out OK or will the graphics card struggle with this moniter ??
When i connect my XPS M1330 to my external monitor and I plug in the power to the laptop, the screen starts to shake!
It only happens when power is on.
My monitor is a Samsung Syncmaster 226BW.
I have tested the monitor with 2 other laptops (with and without power on) and there was no problem. So it must come from the M1330..
i have an inspiron 1420, and want to bring it around school, i usually use it as a desktop at home using an external monitor(FN + F8), for some reason my laptop only works when plugged with a monitor, the laptop monitor is blank but you can see light at least, but no images whatsoever. I got it to work after reformatting the second time but not the 3rd 4th or 5th time.
I've noticed something strange though when formatting with xp, the letters were both gray and red, and when it gets to the page with the estimation(usually about 30 minutes) the picture quality was crap like 4bit.
I've noticed that when i successfully got the laptop monitor working the picture quality ran at a full 32bit
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
Just a few weeks ago, I received a new DELL E6400 with Intel Graphics Card.
Since day 1, I started to notice a strange behavior when I connect an external monitor to the VGA port of my laptop. No matter the resolution, the monitor shows horizontal and vertical blurry lines just like if it was a refresh rate issue.
I reported the issue to Dell, and they replaced my monitor, but the lines are still there...I checked the refresh rate and updated the video card drivers with no luck...
Have any of you experienced something like this?
I'm not using a docking station and I'm running windows XP with extended desktop...