I did a search for my problem but I couldn't find anything useful. So here's my problem...
I have an XPS M1210 laptop and I have a Sharp 32" 1920x1080 display. When I connect the laptop to the Sharp the resolution max's out at 1600x1200, regardless if i'm in Single, Clone, or Dual Screen mode .....
I'm looking for a 24'' external monitor and was interested in one by Asus:
[url]
Well, technically it's 23.6''...But I noticed the resolution is 1920 x 1080, meaning it is 16:9. I know my MBP has a resolution of 1440x900 making it 16:10. I understand that most widescreen TV's use 16:9, however widescreen laptops use 16:10. Will connecting a 16:9 external monitor to my Macbook Pro have any problems?
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
I am buying and external monitor for my father's aspire one and i would like to know the maximum external resolution. I am planning on buying the 22" samsung 2232bw
if it would run at 1680 x 1080?
I am thinking of buying the IdeaPad Yoga 13 - 59359568 - Silver Grey (specs)
I want to hook up a 24" external monitor to it and use this a my primary monitor (no cloning)
I want it be a t least 1900x1200 but anything higher would be even better.
What's the maximum resolution this laptop can handle to my external monitor?
I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
View 7 Replies View RelatedI have bought a Philips Brilliance 272P4 external monitor. Connected the monitor with DVI through docking. I get 1920 x 1080 as max resolution. The monitor displays a note, that I should use 2560 x 1440. I have installed the newest driver to the monitor.
The display card (Nvidia NVS 5400M) is using 333.02 driver, that is the latest recommended. How to enable higher resolution?
Do I get higher resolution with using the displayport insted of DVI port?
I have T410 with Nvidia NVS 3100M with driver version 189.55 connected to external Acer monitor capable of 2560x1440 linked with DisplayPort cable. But, I can't get resolution higher than 1920x1080. What do I need to do?
View 3 Replies View RelatedI have just taken delivery of my Yoga 2 pro but I am struggling with the setup and cannot get a proper duplicated screen using a Kensington 3.0 Superspeed dock. The Yoga has a resolution of 3200x1800 and my spare screen is a BENQ G2420HD at 1980x1080.
I have already ordered a screen and a dock to replicate this setup in a foreign country and the kit is on its way including a second Yoga 2 pro!
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies View Relatedi dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
having trouble with my second monitor that I am trying to connect.
I am using a DVI to HDMI cable and inputting it into the second screen (It is an lcd tv).
Windows 7 allows me to change the resolution of both monitors seperately. i made my regular monitor the same 1920 x 1200, but no matter what resolution i make the second screen, the edges, top bottom left and right are all cut off, sort of like a cropped version of what i should be seeing .....
my vostro 1320 (intel X4500 ) recently got a problem for not being able to detect correct monitor type and resolution, even with a fresh install OS with up-to-date intel driver.
also there is a relative loud noise in last second of shutting down(the moment computer finally powered off). is this a hardware failure?
I know the resolution on the new 13" pros is 1280x800, so if I plugged it into an external monitor of a higher resolution, 1920x1080 for example, would the image on the monitor be shown at that resolution, or would it still be the same res as the macbook pro, meaning it would be really pixelated on the monitor?
View 4 Replies View RelatedI recently purchased a Yoga 2 pro and a Dell U2713HM montior. The monitor will suport 2560x1440. I am using a Toshiba Dynadock usb 3.0 docking station. I can't get the screen display to be above 2048x1152. I've tried the dvi, vga and hmdi on the docking station. What is the maximum resolution for a second montior for the Yoga Pro 2? How to get the yoga pro 2 to output a higher resolution? It would be disappointing if the max is 2048x1152 on a 27" monitor.
View 9 Replies View RelatedI have a HP HDX18t w/ Windows 7 Home Premium and the Nvidia GeForce GT 130M video card. I'm trying to hook up a Dell 30" LCD monitor with a native resolution of 2560x1600 via the HDMI output using a HDMI to DVI cable. Doing so, the system will only allow the external Dell a max resolution of 1280x800 while the HDX screen stays at 1920x1080. The 1280x800 look really bad. I want to use its native resolution of 2560x1600 or atleast the 1920x1080. When I use VGA output, nothing shows up on 30" (blank black screen).
Using my 24" Dell, I can get 1920x1080 either via the VGA or HDMI (to DVI) fine. Based on my research it seems to be a limitation of the Nvidia GeForce GT 130M because it just doesn't allow that high a resolution (i.e. no dual-link DVI capabilitiy). Is this true? Or am doing something wrong?
Is there any solution in using a 30" monitor with the HP HDX18t? Will one of those Matrox DualHead2Go devices work to run the 30" and 24 inch monitor simultaneous at 1920x1200. I'll be fine with that. My wife is firm in using the 30" monitor we have. Is this a loss cause and I have to get another laptop that will support a 30" external monitor? If so, any advice on which one.
I've recently bought a Asus 27" monitor capable of 2560x1440 resolution. My laptop couldn't go higher than 1920x1200 so i'm now looking for a laptop replacement. Will 8560w or other elitebooks with display port connectors do the job?
View 1 Replies View RelatedIs there any way to use an external monitor with the XPS 13. It would make working with photos on the road much easier.
View 3 Replies View RelatedI have an HP ENVY dv6t-7300 laptop. I'd like to connect it to a 1920x2000 24" monitor. My laptop has a max screen resolution of 1366x768. A couple of questions...
1). Is an HDMI cord the best way to to connect to the monitor?
2). Will the monitor stretch the 1366 pixels to fit the 1920 pixels or will the image not fill the monitor?
I just got my new Acer Aspire V14 touch (Windows 8.1) and want to connect it to my Sharp Aquos LC-32DA5U TV via HDMI. I can see the picture but cannot adjust the screen resolution to the native resolution recommended for this TV (1366x768). Funny enough this is exactly the resolution my laptop is using.
When I force use of this resolution via show all in the display properties, then I don't get a picture but just a black screen on my TV.
Is there any other driver etc that I need to install to make this work? It worked perfectly fine as PnP with my old Lenovo computer under Windows 7.
I'm looking to purchase a external monitor for my Studio 15
What the maximum resolutions that my laptop will support? I was told that it will support 1920x1200. I just want to double check that
When I hooked up an external monitor to my E6400 laptop only narrow range of resolutions were available.
The required resolution was not listed.
Do I need to get some drivers to solve this issue?
Right now my internal screen listed as generic pnp monitor.
I have the WXGA+ monitor
I was wondering if anybody else is having issues with using 2 external monitors with their M6400?
My configuration:
I have a M6400 Covet, FX3700M, 8GB, Vista Ultimate 64, A01 BIOS, updated drivers... connected to an E/Port Plus 210W Port replicator. I have a 24" Dell 2405FPW external monitor connected to display #1 (1920x1200) and a 19" 1908WFP connected to display #2. (1440 x 900). Both are connected via DVI connectors.
My problem:
The secondary monitor never has problems... However, the main monitor (24" @ 1920x1200) goes all crazy. It has red "dots" that appear all over the screen in dark areas. The bottom of the screen sometimes has horizontal bars. I see red and black vertical bars as well. The screen constantly flickers and the image hangs off the edges many times. If I change the resolution to BELOW 1440 x 900 the screen looks fine. Anything over 1440 x 900 goes crazy. (none of this occurs when using the LCD on the laptop itself)
The 24" monitor is fine. I have swapped cables and they do not help. If I plug up my desktop computer to the montior- it is perfect in 1920x1200. If I plug up my old Dell Precision M90 using it's old E/Port docking station- it too works fine in 1920 x 1200. So it's not the monitor.
Dell support doesn't know what the problem is. They say it's probably a driver issue. (I have the latest driver) They say they will contact me in the future if there is ever a solution and they are going to escalate it to their video hardware team.
Is there anybody else out there experiencing the same issues as me?
If you are running dual monitors successfully with the E/Port Plus 210W, what monitors are you using, at what resolution and what connector? (DVI or that new display port thing) If you aren't using the E/Port Plus 210W- what docking station did dell sell you?
I need to get a resolution to this ASAP.
I've attached two photos taken from my digital camera showing the screen issues.
I am about to take delivery of an XPS M1330 with the 128MB NVIDIA GeForce 8400M GS graphics card. When at my desk, I am looking to use the laptop with a Dell 19-inch Widescreen LCD Flat Panel Monitor [url] I am hoping to use the external monitor at the same time as the laptop monitor (for example, Outlook on one screen and Internet Explorer on the other).
- Is this possible? Does the graphics card support multiple monitors / dual view in this way?
The XPS screen resolution is 1280x800 and the resolution of the external monitor is 1440x900.
- Will the fact that the screens have different resolutions cause any problems?
I recently purchased an XPS M1330, with:Intel Core 2 Duo Processor T8300 (2.4GHz/800Mhz FSB/3MB cache)Intel Integrated Graphics Media Accelerator X31004 GB DDR2 SDRAM 667MHz (2 DIMMs)Genuine Windows Vista Home Premium
I'll mostly use it for AutoCAD, SketchUp, etc.
I want to purchase a monitor, but I'm not sure about a few details:What's the difference between buying a laptop with an HDMI entry, versus just buying one with a DVI entry (which seem to be cheaper), and get a HDMI-to-DVI cable?What's WXVGA and all those 5-letter-acronyms
I am not sure if this is a dumb question or not but I was wanting to get an external monitor for my XPS M1330. It has the nVidia graphics card. Is there a limit to the size of monitor I could get.
View 3 Replies View RelatedI have a problem with my dell e1705 laptop. I was trying to set up an external monitor, after installing the drivers that came with the monitor i couldn't get the laptops internal monitor to start back up. I tried restarting with the external monitor unplugged but the laptops screen just glows with no picture. can anyone tell me how to enable my internal monitor? Only the external monitor shows up when i try to switch displays in the nvidia controlpanal.
View 15 Replies View RelatedI just got my new XPS M1330 With 128MB Graphic Card.
Now when i connect to my XPS M1330 with my External Monitor (Dell 24" 2408WFP) Resolution: 1920X1200
I don't see good sharpness in fonts and image. I have set native resolution that is 1920X1200
I also have Inspiron 1720 (256 Mb Graphic Card)
There its show very fine and sharp fonts and pictures.
I use VGA cable in both the systems.
Now when i talk to Dell Teach Department.
They gave me few reasons as below.
My laptop screen is 13.3" and Monitor screen 24" (i know this is silly reason ) (but i argued with him and then he gave me 2nd reason)My XPS M1330 have lower graphic card (128MB Geforce 8400M GS) that is the reason i can't see clear display. To see clear sharp text and images i need batter graphic card (more then 128MB).
so he said he can't help me. It is not problem of XPS M1330.
Does anyone of you using XPS M1330 with 1920X1200 Resolution?
I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
I think this is the problem [URL] ....
I am thinking of getting the Dell UltraSharp U2713HM external monitor and use it with my y510p Lenovo laptop. My question is: Is there any way to get the 2560x1440 resolution out of the monitor using only VGA or HDMI port of this laptop?
View 9 Replies View Related