I have an HP ENVY dv6t-7300 laptop. I'd like to connect it to a 1920x2000 24" monitor. My laptop has a max screen resolution of 1366x768. A couple of questions...
1). Is an HDMI cord the best way to to connect to the monitor?
2). Will the monitor stretch the 1366 pixels to fit the 1920 pixels or will the image not fill the monitor?
I've had my laptop for about one and half years now, and so far the webcam has been working fine. Today though, it stopped functioning. At first I thought it was the microphone and webcam, but I tested the microphone and that's working. The only thing not working is the webcam.
I tried restarting. I tried looking up the driver and making sure it was all set. At that point, I realized I didn't even have a webcam installed (which is what my programs were telling me but I didn't believe).
I then searched on this forum to find a solution and another member posted that removing the bevel and sticking the little plug back in should work. I tried it and it didn't. (I'm also concerned that I did this with my computer on... Have I done any serious damage?)
Other info:
Laptop: HP ENVY dv6t-7300 CTO Select Edition Notebook PCProduct Number: C2Y46AV
Is it possible to add a second 24" monitor for use with my laptop, which is connected through a workstation. If so, what is required?
View 1 Replies View RelatedWhen I plug in an HDMI cable to my laptop the screen freezes and a black box forms around the screen. The only thing I can see is my desktop background image. Can't do anything, system is totally frozen. When I disconnect it everything works great again. What do I need to do? I'm using a HP ENVY DV7-7250us with WIN7 (64bit) installed ...
View 4 Replies View Relatedmy resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
I think this is the problem [URL] ....
I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
View 7 Replies View RelatedWe have two HP Pavilion dv6t-3100 CTO Select Edition Entertainment notebooks purchased at the same time. The screen on one of them has been flickering, has had to do a few recoveries, and has generated at least one BSOD.
Oddly, the problem child's Intel driver is 8.17.0010.0029, and the AMD driver is 8.741.1.1000, dated 6/22/2010.
But the problem-free laptop has Intel driver 8.17.0010.1043, and AMD driver 8.771.1.0, dated 9/8/2010.
Huh? The only difference between the two is the "bad" laptop has a i7-720QM ICU whereas the "good" laptop has the slightly more powerful i7-740QM. So why the different drivers?
I just received a refurbished HP ENVY TouchSmart m6-k125dx Sleekbook. I can't set a resolution higher than 1366 x 768 though according to specs the native resolution is 1920 x 1080. I updated the Intel HD graphic driver and the BIOS but that did not work. Did HP possibly reinstall a wrong display as part of the refurbish?
View 3 Replies View Relatedi recently purchased my laptop (envy m6 k025dx i5-4200u model) and i try to find manual
i want output my QHD monitor by envy m6 but is it possible? m6 not has video card and now using HD4400 set
m6 has HDMI PORT(1.4 ver)
I have an HP ENVY TS 17 Notebook with NVIDIA GT 740M and Intel 4600HD Graphics Drivers, and running Windows 7. Whenever I want to change the resolution in games to a lower resolution than the desktop resolution, the game shrinks its view leaving couple of inches black bars on the edges. For example if my desktop resolution is 1920x1080, and I want to run a game in 1600x900, the game doesn't fill the screen, instead, it leaves some amount of blank space on the edges of the screen.
In order to solve this problem, I tried the following steps:First I tried to locate the Display tab in NVIDIA Control panel in order to set scaling/stretching to 'Full Screen', but my version of NVIDIA CP doesn't have the Display Tab (My NVIDIA drivers are the latest version).Then I found out that I should do this from the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Scaling" under Display > Display Settings, and it only shows the option Maintain Display Scaling which is checked by default and doesn't allow changing it. Also, after searching through internet I saw that some people suggested entering the 'Advanced Settings' and trying to make changes there. When I try to enter Advanced Settings under Display, it says "This display does not support any of the advanced settings".
After trying these without success, I tried updating the Intel's driver through their website hoping this can fix the problem. I ran Intel's small application on their website which identifies my chipset and suggests me the latest driver for that chipset. The website told me that the driver that is installed on my computer is 10.18.10.3304, and there is an update for this which is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried running it, it gave me this error message: "The drivre being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacturer. Setup will now exit." which doesn't make any sense.
Hp Envy 6t-1000 has a green tint to the monitor. There seems to be no black color. I ran the system diagnostics and everything passes. If I tyr the color palette check it fails. I have updated the video drivers, updated the BIOS, replaced the monitor cable and run a system recovery using the disks provided by HP. All to no avail. I can attach an extrenal monitor, either HDMI or USB, and it works. Only the built in display has the green tint and lack of black palette.
View 1 Replies View RelatedI just got an HP Envy, 17 inch, and I have an HP 25 inch monitor I would like to connect to it. It has the "old style" connector which was supported on my old HP Entertainment Notebook. Not on the new one! What kind of adaptor do I need to get? I do have an HDMI port on the left side of my laptop. Do I need just a regular HDMI cable?
View 2 Replies View RelatedI have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies View RelatedMy hp envy can't detect the external monitor. I tried to re - install the graphic drivers (hd 4600 / Geforce 740m)...
It used to work and all of a sudden it stopped. My only assumption is that the HDMI output itself is not functioning.
I have a brand new HP Envy X2 (15-C001dx) with Windows 8.1. So far it works fine by itself. I tried connecting an external monitor to the laptop using an HDMI cable from the laptop to an LG L246WPQ display. The problem is that 10-15% of the left side of the laptop screen content does not appear on the external monitor. Missing from the external monitor is the word "Start" in the upper left corner along with roughly the 2 leftmost columns of tiles. This occurs in both "Duplicate display" or "Only display on screen 2" modes. This is using a resolution of 1680x1050 which both the laptop and the LG appear to support. Using the touch screen on the laptop I can scroll the tiles to the right and see the missing leftmost columns. The information that is displayed on the external monitor begins as far left as that monitor will display. In other words, there is no black/blank area on the left. Except for the missing information on the left side, the content of the rest of the external monitor looks fine. I updated the laptop's video driver to the latest on HP.COM. No change in behavior. I tried every option I could find on the LG OnScreenDisplay, but nothing made the display any better.
View 2 Replies View RelatedFor the past several days a narrow horizontal line appears in the lower part of the screen on my Envy dv7 laptop - Windows 8, Intel i5 processor - that I purchased in Janurary 2013.The line flickers in various colors and is very annoying. I pulled up the BIOS screen and the line does not appear. I don't have another monitor to plug into, so I can't run that test. Everything else is functioning normally.
View 7 Replies View RelatedI just bought the HP ENVY 17-j180ca Notebook PC. I'm trying to calibrate my monitor for photograph editing. The software I'm using to calibrate the monitor with asked two questions I don't have the answers to...
1. Is the Gamut normal or wide?
2. Is the monitor backlit with Fluorescent CCFL, white LED or RGB LED?
I purchased my laptop about two years ago. A few days ago, the screen suddenly dies, and on boot, it flickers a few times with the proper display, but then goes blank. The backlight seems to remain on though. When I use an external monitor with the HDMI port, the external monitor works fine, however the laptop screen remains blank. Here's a video of what it looks like when I first boot the laptop: [URL] .....
View 2 Replies View RelatedTried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
View 1 Replies View RelatedI have a latitude E6430s running windows 7. I have it docked using a dell docking station, and have 2 dell monitors connected using dvi. With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
View 1 Replies View RelatedIt happens that my laptop sometimes start showing 4 displays and sometimes when rebooted several times. Starts working normally. Seems to me more of a drivers problem or else why would it start normally if this was a hardware problem. Also, when laptop was running, I kept shaking the laptop just to check if it was a hardware problem like the lcd's cable might be loose which fitted in the motherboard but it was not the case.
Laptop is: HP Envy 6.+Laptop is not under warranty.
I have attached the photos.
Photo 1: [URL] .....
i have recently purchased and HP Envy 17 laptop and have been trying to backup all of my iphone 5s photos and videos onto thelaptop however everytime i try to play videos either through the photos folder or the photos library app nothing works.In the photo app the app just freezes and crashes and in the photos documents folder media player just comes up not responding. This hapens with the vast majority of my videos i have seen that other people have had the same issure and i have installed the VLC video app as suggested and still nothing works.
there has been an IOS update since i started taking videos however this makes no diffeence as the handful of videos that do work are from both before and after the update so it can not be an issue with my phone and the videos i have taken in the last few days dont work.
So I just bought a new HP ENVY TouchSmart 17-j130us (Windows 8.1) a few weeks ago and now something is wrong with the screen. I decided I would connect my laptop to my TV monitor via HDMI. I set the laptop on top of my Xfinity cable box while it was plugged in (HDMI cable is too short) and continued doing my homework. A few hours later, when I unplugged it from the HDMI cable and picked the laptop up, the screen turned greenish and flickered. It went away eventually. But then I noticed that when I tilted the screen back or fowards or even slightly moved the laptop, the screen would turn green again and flicker green a little. I hope this is not my fault in some way. The touchscreen and the backlight works just fine. I can still see what's on the screen while its green. Right now it's fine unless I move the laptop or tilt the screen in some way. Also, when plugged into the TV, that’s fine as well.
View 1 Replies View Relatedhaving trouble with my second monitor that I am trying to connect.
I am using a DVI to HDMI cable and inputting it into the second screen (It is an lcd tv).
Windows 7 allows me to change the resolution of both monitors seperately. i made my regular monitor the same 1920 x 1200, but no matter what resolution i make the second screen, the edges, top bottom left and right are all cut off, sort of like a cropped version of what i should be seeing .....
I'm looking for a 24'' external monitor and was interested in one by Asus:
[url]
Well, technically it's 23.6''...But I noticed the resolution is 1920 x 1080, meaning it is 16:9. I know my MBP has a resolution of 1440x900 making it 16:10. I understand that most widescreen TV's use 16:9, however widescreen laptops use 16:10. Will connecting a 16:9 external monitor to my Macbook Pro have any problems?
I have HP Envy dv6 7200t laptop which I purchased directly from HP.
In the speifications I requested a special graphic card: NVIDIA GeForce GT 630M with 2 GB dedicated ram.
I am using Windows 7 64 bit in English.
Now I didn't have much use for such a graphic card until today - I installed a game and it pointed out my graphic card sucks and the game won't run smoothly on it - it said my graphic card is Intel HD Graphics 4000.
I checked the device manager and found out 2 graphic drivers - for both of the listed graphic cards.
both of them are up-to-date (I made sure about the second one from nvidia control panel, and even reinstalled it just incase)
Assumptions:
I am not much of a hardware expert but I assume I do have 2 graphic card - internal on the motherboard (intel) and external (GeForce) - And if thats the case, somehow Windows chooses to use Intel instead of GeForce.
I also made sure of it by disabling the Intel HD Graphics 4000 from the Device Manager and my screen went black - I guess its safe to assume that indeed the intel driver is the one in use.
I did a search for my problem but I couldn't find anything useful. So here's my problem...
I have an XPS M1210 laptop and I have a Sharp 32" 1920x1080 display. When I connect the laptop to the Sharp the resolution max's out at 1600x1200, regardless if i'm in Single, Clone, or Dual Screen mode .....
I know the resolution on the new 13" pros is 1280x800, so if I plugged it into an external monitor of a higher resolution, 1920x1080 for example, would the image on the monitor be shown at that resolution, or would it still be the same res as the macbook pro, meaning it would be really pixelated on the monitor?
View 4 Replies View RelatedI have Envy dv6t-7200 Quad Edition notebook and I recently installed Windows 8.1.
I can't seem to find how to enable bluetooth. Some things I can narrow it down to:
1) I am pretty sure that model DOES come with bluetooth (I think I remember using it before, but not 100% sure).
I can't seem to get the specs page of this product, but I bought it directly from HP site ...
2) I downloaded and installed the Qualcomm Atheros Bluetooth driver and Ralink Bluetooth Software driver that I found on the HP Support & Downloads site.
3) I don't have any mention of bluetooth in my Device Manager (generic or otherwise). From first appearance it would seem I don't have bluetooth on my notebook but again, I'm pretty sure I do have.