I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
View 7 Replies
My father's sight is failing and I want fix up an external monitor with his Acer 7720, so that I can crank up the dpi, but still have reasonable window size.
I am a bit unclear about whether the laptop's graphics card can drive a higher resolution external, and how much higher.
I am looking at either the Acer 22 inch 1680 x 1050, or the Acer 23 inch with 1920 x 1080
I did a search for my problem but I couldn't find anything useful. So here's my problem...
I have an XPS M1210 laptop and I have a Sharp 32" 1920x1080 display. When I connect the laptop to the Sharp the resolution max's out at 1600x1200, regardless if i'm in Single, Clone, or Dual Screen mode .....
I'm looking for a 24'' external monitor and was interested in one by Asus:
[url]
Well, technically it's 23.6''...But I noticed the resolution is 1920 x 1080, meaning it is 16:9. I know my MBP has a resolution of 1440x900 making it 16:10. I understand that most widescreen TV's use 16:9, however widescreen laptops use 16:10. Will connecting a 16:9 external monitor to my Macbook Pro have any problems?
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
View 1 Replies View RelatedI am buying and external monitor for my father's aspire one and i would like to know the maximum external resolution. I am planning on buying the 22" samsung 2232bw
if it would run at 1680 x 1080?
I am thinking of buying the IdeaPad Yoga 13 - 59359568 - Silver Grey (specs)
I want to hook up a 24" external monitor to it and use this a my primary monitor (no cloning)
I want it be a t least 1900x1200 but anything higher would be even better.
What's the maximum resolution this laptop can handle to my external monitor?
Inspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
View 1 Replies View RelatedI have bought a Philips Brilliance 272P4 external monitor. Connected the monitor with DVI through docking. I get 1920 x 1080 as max resolution. The monitor displays a note, that I should use 2560 x 1440. I have installed the newest driver to the monitor.
The display card (Nvidia NVS 5400M) is using 333.02 driver, that is the latest recommended. How to enable higher resolution?
Do I get higher resolution with using the displayport insted of DVI port?
I have T410 with Nvidia NVS 3100M with driver version 189.55 connected to external Acer monitor capable of 2560x1440 linked with DisplayPort cable. But, I can't get resolution higher than 1920x1080. What do I need to do?
View 3 Replies View RelatedI have just taken delivery of my Yoga 2 pro but I am struggling with the setup and cannot get a proper duplicated screen using a Kensington 3.0 Superspeed dock. The Yoga has a resolution of 3200x1800 and my spare screen is a BENQ G2420HD at 1980x1080.
I have already ordered a screen and a dock to replicate this setup in a foreign country and the kit is on its way including a second Yoga 2 pro!
I have an HP ENVY dv6t-7300 laptop. I'd like to connect it to a 1920x2000 24" monitor. My laptop has a max screen resolution of 1366x768. A couple of questions...
1). Is an HDMI cord the best way to to connect to the monitor?
2). Will the monitor stretch the 1366 pixels to fit the 1920 pixels or will the image not fill the monitor?
I have a latitude E6430s running windows 7. I have it docked using a dell docking station, and have 2 dell monitors connected using dvi. With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
View 1 Replies View RelatedI don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
View 2 Replies View RelatedI own 15" Aspire 5738 laptop. I have hooked up 27" external monitor to it. I am facing a problem with 27" monitor. The display on the external monitor doesn't cover whole screen. The reason being that Aspire's screen is primary monitor as default. I want to make 27" monitor as primary. How can I do that?
View 4 Replies View RelatedI want to install a SSD in my laptop, a Dell 17 R SE 7720. I can see that the hard disk is right under the palm rest, on the left side.
I want to move the Hard Disk to the other HDD slot, and put the SSD where the HDD is now.
The question is, can i do this without voiding the warranty? Am i allowed?
Is there a list with what i can do / change to my laptop without voiding the warranty?
i have an inspiron 1420, and want to bring it around school, i usually use it as a desktop at home using an external monitor(FN + F8), for some reason my laptop only works when plugged with a monitor, the laptop monitor is blank but you can see light at least, but no images whatsoever. I got it to work after reformatting the second time but not the 3rd 4th or 5th time.
I've noticed something strange though when formatting with xp, the letters were both gray and red, and when it gets to the page with the estimation(usually about 30 minutes) the picture quality was crap like 4bit.
I've noticed that when i successfully got the laptop monitor working the picture quality ran at a full 32bit
I am just after some Inspiron 15r has developed a fault with white screen. I have tried connecting it to an external monitor through the vga and the hdmi port but still get the same fault.
View 5 Replies View RelatedMy Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
I have been using an external LCD monitor hooked to my inspiron 6400 for 6 months, everything is fine. but 2 days ago when I moved the laptop a little far away from its old place,
I tried to add a 6-feet VGA extension cable to the present VGA cable of the external monitor . the image with extension cable is horrible, so I take the extension cable off and move the laptop back to the old place. and a problem showed up:
when I hook my inspiron 6400 to the external LCD monitor via VGA port on the laptop, some regions of the image on the external monitor flash (if I put on a document, the words are shaking, or "dancing"),
for example the upper right corner, and the middle section of the screen are doing this right now. and if I take the VGA cable off and put it back on, the flashing region changes. but one thing for sure: Not all the screen flash, only several regions.
My laptop was working correctly and then I booted up one day, the bios worked fine but then the screen went black. I connected an external monitor to the lap-top and the laptop display works fine. As soon as I remove the external monitor, again, I get a black screen on my lap-top.
I have run the full system option of the Dell diagnostics and have 2 errors, battery and dvd flash rom. I have ordered a new battery. I have also noticed that my lap-top does appear to get quite hot.
I bought this laptop 1 week ago. When I was in battery mode the laptop was dying at 60%.
Returned it to the store and got a new one.
I am working on my mom's Dell Inspiron n5010 Laptop. I have replaced motherboard, LCD and video/camera cable. Still getting 8 beeps until windows starts up. The video test worked fine on LCD.Flashed BIOS to A15, updated video drivers. Not sure what is still causing issue. I have also removed memory and replaced it. I am at my wits end.
Product
Inspiron N5010
BIOS Version String
A15
Operating System Name
Microsoft Windows 7 Home Premium Edition (64-bit)
[code]....
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies View RelatedLaptop is on and plugged into the docking station which is "powered". Connection to monitor / keyboard and mouse is fine, however I'm surprised to see a lower power - plug is soon message. Isn't docking station supposed to provide power to the laptop?
View 18 Replies View RelatedI have an issue with my Inspiron N5010 screen, it doesn't work when switching on my laptop on Battery or AC mode. It happens a lot of times when I turn on the laptop the power button, the power indicators at the bottom turns on normally and the laptop is running without any weird sounds. But the screen is pitch black even doesn't show up anything when I concentrate on it in with a lamp or any light.
When I press the power button again even after 5 mins from the start time of being running the laptop just turn off immediately and doesn't take time to switch off as If the windows wasn't loaded!
I was resolving this problem by disconnecting the AC adapter > removing the battery > Pressing and hold the power button for 20 seconds technique.but today it doesn't work anymore, If there's anything I can do to get the screen backlight to work normally ....
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
having trouble with my second monitor that I am trying to connect.
I am using a DVI to HDMI cable and inputting it into the second screen (It is an lcd tv).
Windows 7 allows me to change the resolution of both monitors seperately. i made my regular monitor the same 1920 x 1200, but no matter what resolution i make the second screen, the edges, top bottom left and right are all cut off, sort of like a cropped version of what i should be seeing .....
