Dell Inspiron 1300 :: External Monitor (using Fnc-F8) For Broken Screen Laptop Just Stopped Working
Apr 2, 2013
Inspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
I have hp g61 for a while, i have been maintaining really good till recent my screen went BLACK.. it was acting funny before as it stays ON after i turn of the laptop... and now it is all back  cant see nothing ... the laptop works fine when i connect to external monitor.. Â
basically I am thinking of connecting an extra monitor (19', 20' 22' ?) to my Dell Inspiron 1300 which has Intel® Graphics Media Accelerator 900... how do I go about this?
I don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
I have a latitude E6430s running windows 7.  I have it docked using a dell docking station, and have 2 dell monitors connected using dvi.  With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
I am just after some Inspiron 15r has developed a fault with white screen. I have tried connecting it to an external monitor through the vga and the hdmi port but still get the same fault.
I am working on my mom's Dell Inspiron n5010 Laptop. I have replaced motherboard, LCD and video/camera cable. Still getting 8 beeps until windows starts up. The video test worked fine on LCD.Flashed BIOS to A15, updated video drivers. Not sure what is still causing issue. I have also removed memory and replaced it. I am at my wits end.
I have an issue with my Inspiron N5010 screen, it doesn't work when switching on my laptop on Battery or AC mode. It happens a lot of times when I turn on the laptop the power button, the power indicators at the bottom turns on normally and the laptop is running without any weird sounds. But the screen is pitch black even doesn't show up anything when I concentrate on it in with a lamp or any light.
When I press the power button again even after 5 mins from the start time of being running the laptop just turn off immediately and doesn't take time to switch off as If the windows wasn't loaded!
I was resolving this problem by disconnecting the AC adapter > removing the battery > Pressing and hold the power button for 20 seconds technique.but today it doesn't work anymore, If there's anything I can do to get the screen backlight to work normally ....
It's not like normal fan working when computer gets cooler stops, when it's heating up starts working. It happened 7 days ago. And that never happened since then. But I'm still wondering why it's happened. My laptop is just a few days old. I was checking my air vent and suspiciously was being silent. After keep checking 5 to 10 min the fan still wasn't not working. And then I started running heavy software like video converting program. CPU was working 100% when I load this, fan still was not working laptop bottom was getting heated up. Then decided to check my cpu temp and installed everest ultimate edition. Everest doesn't recognize both cpu temp and fan.
I restarted laptop because my laptop was getting hotter. And when I restart it, laptop fan started working normally. CPU temp, fan speed are recognized in everest software. After I noticed that in system cooling policy settings was in passive mode on battery. Why it's happened? I doubt it's cord unplugged or sth. Cause software couldn''t detect both cpu temp and fan. Remember, after I restarted software detected the fan and temp, all fan thing go back to normal. And if it was loose connection why it's worked back again when I restarted and still working. I'm not able to give it back.
I'm seeking feedback on a lightweight replacement for an Inspiron 1300 I once had. Something if I needed to use I could use while propped up in bed, nothing heavier than my old Inspiron 1300 which I don't know exactly how heavy it was but I need to replace it with another laptop, possible one lighter than my Inspiron 1300 which I would be using most of the time for web surfing and email. I know the lighter the laptops are the more expensive they are.
My touch screen has recently stopped working for an unknown reason. I looked under "Devices' in 'Device Manager' using the side 'Search' tool and I actually can't find the touch screen program anywhere. I ran a Diagnostics Test for it and it said that the device could not even be found.
I have a Dell Inspiron 1520 with an Nvidia 8600gt. I have a dell 2409 24 inch 1920 x 1080 monitor and a Samsung 22inch 1680x1050 LCD TV. I use one or the other depending what room I'm in. Both are connected using VGA cables.
These have always worked perfectly, today when I tried plugging into either one they are detected as 'generic non pnp monitor' and I get a choice of standard resolutions up to 1600 x 1200. These always used to run at their native resolutions and were detected as Samsung and Dell.
I have reinstalled the display drivers, power cycled everything, gpu seems to be running fine according to gpu-z.
I have reverted to a working backup but that made no difference. Im using windows 7 64bit.
I have a user who recently turned in an Inspiron 1300 with a screen problem. Unfortunately this machine is out of warranty, and the extended warranty we usually purchase was never bought for this machine (this is why users don't get to do their own ordering anymore! ....
Just a few coke drops spilled on the upper right side of the keyboard. Right around the backspace key.
At the moment it happened, the lcd starts flipping out, eventually turns solid white, then shutting down.
Did a complete disasemmble and cleaned every piece with contact cleaner. The laptop functions 100% now....except one small irritation..
The screen goes black at random. Sometimes 30 seconds after boot...sometimes 5 or 6 hours...The Power indicator, baterry light and wifi lights all stay on green as if the computer is still running. I have to hold the power button down to shut it off and it reboots with the desktop recovery white screen.
It would be easiest if I just had a camera to take a picture of it, but, alas, I do not.
I have an Acer 22" monitor that I attach via mini display --> VGA to my 13" MBP, but for some reason it isn't aligning correctly. The external monitor is set up to the right of the laptop. The native resolution of the monitor is 1680x1050, which is displaying correctly, but the entire image isn't showing up on the screen. I moved the horizontal position all the way to the 100 mark, but there is just a 1.5-2" black line going down the right side of the monitor. Also, normally if you drag an app between the laptop monitor and the external monitor it is "seamless," but right now you have to drag a little further until it shifts onto the next monitor... if that makes sense. Essentially, the whole image on the external monitor is shifted to the left about 1.5-2". The monitor seems to be fine... when I make the resolution lower, the image fills the entire screen (it's just all out of proportion and hurts my eyes).
I have tried reconnecting all the connections and resetting all the settings, but nothing is working. It's still workable right now, but it's annoying as heck.
I own 15" Aspire 5738 laptop. I have hooked up 27" external monitor to it. I am facing a problem with 27" monitor. The display on the external monitor doesn't cover whole screen. The reason being that Aspire's screen is primary monitor as default. I want to make 27" monitor as primary. How can I do that?Â
I use the Displaylink dock to connect to an external monitor, but it has suddenly stopped working. The error message said "check connections". I have done so - replaced the digital video cable between dock and monitor with a new one, cycled both dock and monitor on and off several times, but windows can not find an external display.
The Lenovo settings app has been giving me an "updating... " message for 3 days (I have raised a query on that elsewhere) so I can't use that to check out the display problem. I should say the display problem started today, and the "updating.."
i have an inspiron 1420, and want to bring it around school, i usually use it as a desktop at home using an external monitor(FN + F8), for some reason my laptop only works when plugged with a monitor, the laptop monitor is blank but you can see light at least, but no images whatsoever. I got it to work after reformatting the second time but not the 3rd 4th or 5th time.
I've noticed something strange though when formatting with xp, the letters were both gray and red, and when it gets to the page with the estimation(usually about 30 minutes) the picture quality was crap like 4bit.
I've noticed that when i successfully got the laptop monitor working the picture quality ran at a full 32bit
I have connected my monitor to an external monitor. It works fine. Only problem I have ( and a little irritating one) is that the external monitor picks up display only after Windows is loaded. Pre-OS screens like BIOS settings, GRUB loader (I have Installed Linux ) doesn't show up)
Is this an issue with BIOS? Because, when I connect HP dv6000 to my monitor, I can see the BIOS screen as well. I am sure the problem is not with the monitor.
The BIOS is responsible for detecting displays before the OS is loaded right? I checked BIOS settings and there is nothing to indicate the display ports/devices (however, this page on HP website shows a BIOS screen "Advanced" which apparently has those settings)
(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six  months ago, approximately one week after the one year warranty expired.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop. Â
Screen went black and turning on off does not get it to work. After searching tried a few of the suggested fixes for other models and no luck. Does not work with external monitor either. Are there any known bios fixes for this model...
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.  When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.  When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.  "How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
