Dell Inspiron N5010 :: Display Now Only Works When External Monitor Is Connected
Apr 27, 2013
My laptop was working correctly and then I booted up one day, the bios worked fine but then the screen went black. I connected an external monitor to the lap-top and the laptop display works fine. As soon as I remove the external monitor, again, I get a black screen on my lap-top.
I have run the full system option of the Dell diagnostics and have 2 errors, battery and dvd flash rom. I have ordered a new battery. I have also noticed that my lap-top does appear to get quite hot.
(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop.
When i turn on the laptop, display doesn't turn on even when external monitor connected via VGA/HDMI.. I hear CPU Fan sound, keyboard lights on, power light on.
I purchased my laptop about two years ago. A few days ago, the screen suddenly dies, and on boot, it flickers a few times with the proper display, but then goes blank. The backlight seems to remain on though. When I use an external monitor with the HDMI port, the external monitor works fine, however the laptop screen remains blank. Here's a video of what it looks like when I first boot the laptop: [URL] .....
I am just after some Inspiron 15r has developed a fault with white screen. I have tried connecting it to an external monitor through the vga and the hdmi port but still get the same fault.
i have an inspiron 1420, and want to bring it around school, i usually use it as a desktop at home using an external monitor(FN + F8), for some reason my laptop only works when plugged with a monitor, the laptop monitor is blank but you can see light at least, but no images whatsoever. I got it to work after reformatting the second time but not the 3rd 4th or 5th time.
I've noticed something strange though when formatting with xp, the letters were both gray and red, and when it gets to the page with the estimation(usually about 30 minutes) the picture quality was crap like 4bit.
I've noticed that when i successfully got the laptop monitor working the picture quality ran at a full 32bit
I am working on my mom's Dell Inspiron n5010 Laptop. I have replaced motherboard, LCD and video/camera cable. Still getting 8 beeps until windows starts up. The video test worked fine on LCD.Flashed BIOS to A15, updated video drivers. Not sure what is still causing issue. I have also removed memory and replaced it. I am at my wits end.
I have an issue with my Inspiron N5010 screen, it doesn't work when switching on my laptop on Battery or AC mode. It happens a lot of times when I turn on the laptop the power button, the power indicators at the bottom turns on normally and the laptop is running without any weird sounds. But the screen is pitch black even doesn't show up anything when I concentrate on it in with a lamp or any light.
When I press the power button again even after 5 mins from the start time of being running the laptop just turn off immediately and doesn't take time to switch off as If the windows wasn't loaded!
I was resolving this problem by disconnecting the AC adapter > removing the battery > Pressing and hold the power button for 20 seconds technique.but today it doesn't work anymore, If there's anything I can do to get the screen backlight to work normally ....
I purchased a Dell XPS L502X laptop about 2.5 years. It crashes when you connect an external monitor, not immediately, but normally about an hour or two while connected. Its not a blue screen crash, everything freezes and the external monitor displays multicolored patterns. In the end I have to do a hard reset.
I have tested different monitors and HDMI cables and found no changes. Luckily the laptop is still under warranty and has Dell technical support has:
-run all possible diagnostics -updated all drivers -replaced the hard-drive (after formatting the previous hard-drive) -Got me to test individual RAM units one by one -Replaced the motherboard (twice)
At the moment, I am still dealing with Dell tech support and after the most recent motherboard replacement they are asking me to test it with different monitors using different cables. Although this is the next step, I'm skeptical it will make a difference, firstly as I have done this already with no difference and secondly because I am currently using the monitor and HDMI cable on a much older Dell Inspiron 1525 and its working 100% fine. If it continues to crash after this step they want me to once again format the hard-drive, re-install everything and test it again.
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
ordered another LCD and tried to replace it, to no avail. I opened it up and everything was hooked up right. Then I tried the other LCD, he gave me with it. Same thing. When I hit the fn f4 in vista, it appears to try to switch but the LCD never comes up. Also, when switching display modes, the LCD will flicker breifly (VERY BREIF). This does not smell like a video adapter or motherboard problem. I am still working on it and researching but figured I would see what all of you thought.
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
I've got a european Sony Vaio Z (first generation), which seems to have some major overheating issues, especially when it's connected to an external display.
Setup: Sony Vaio Z11VN -> Docking station -> NEC2690WUXi (running at 1920x1200)
Here's a summary of temperatures when this machine is in SPEED mode (Nvidia 9300gs) in Windows XP (idle)
Clearly, the temperature drops if I switch to STAMINA mode, or if I unplug the laptop from the docking station, however, in the latter case the temperature drops to perhaps 70C.. so that is without running it on the external 1920x1200 display.
and when running 3d applications or games, the laptop can simply shut itself off for no reason whatsoever (overheated?)
I've heard about overheating problems of the NVIDIA GPUs.. is this such a case? (NVIDIA 9300GS)
I'd like to know if anyone else have had this problem with their Vaio Z (i've seen ppl having problems with the FZ)
My model is a VGN-Z11VN (swedish, although distributed via the UK)
my studio 1747 (not in warranty) (i7 win7),has stopped booting anymore it was working fine till last week ( occasionally my screen does flick in last coupon of month), So when I do turn my system on all upper volumn light flashes from left to right and then right to left and then system turn off itself, during that period screen show no display.
connecting external monitor (TV via hdmi) does work and system boots fine show display on external monitor but no display on system LCD. Something display flicks on external montor also, it happens when my laptop LCD tries to display something (i.e. sometime laptop LCD flicks and sometime it display for few seconds and then go back to Black screen). Also when connect external monitor my mouse pad stops work and sometime works when I connect usb mouse, but when LCD screen start display something, mouse pad also starts work.I tried all stuff, whatever I could find on internet as below
1) Taking battery off and press power button for 1 min. 2) Hold 'D' key and then press power button LCD sometime show some color and then goes back to black. 3) Removed battery and CMOS battery to total drain of charges. 4) Removed keyboard panel and checked LCD display cable and make sure its not loose.
To me it seems like motherboard, graphic card are fine as system is working on external monitor, LCD screen also looks fine as sometime is display and not greying out (its either Black-out or display). As I have also checked cable is properly attached with motherboard, so it can't be loose connection. Don't understand why LCD works sometime.
The monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
Model# HP Pavilion dm1-4151NR Product# A6X41UA#ABA Windows 7 Home Premium 64 bit
Screen looks like it has a very dark sun glass over it. If you shine a flash light on it you can see what is there. VGA connection to another monitor works okay.
Updated BIOS to latest. No change. Updated Graphic driver. No change.
I have just switched to Windows 7 Pro and it is already driving me crazy. I use a Lenovo X200 with my Ultrabase. I connect the notebook to an external display via DisplayPort. The Intel GM45 Graphics Driver crashes about twice a minute when the Notebook is docked and connected to the external screen. Than all screens become black and afterwards a message pops up, that says "Intel Graphics Accelerator for XP (R) stopped responding and has recovered". Sometimes the notebook crashes and reboots. That gets really annoying and I haven't found a solution. Bios Version is 3.20. I loaded the latest Intel Graphics Driver from the Lenovo Webpage (8.15.10.2302) with Windows 7 SP1 (all updates installed). When I use a standard windows driver and not the Intel driver the external display flickers black every minute once. The newest Intel driver (from the Intel Website) does not work, since it says that it is not released for my notebook.
When I connect my external monitor (ASUS PA248) to my W520, the audio disappears. When I disconnect it, the audio returns. This seems a bizarre link between audio and video, but there it is. Note that the PA248 does NOT have built-in speakers.
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
I just got an HP Envy, 17 inch, and I have an HP 25 inch monitor I would like to connect to it. It has the "old style" connector which was supported on my old HP Entertainment Notebook. Not on the new one! What kind of adaptor do I need to get? I do have an HDMI port on the left side of my laptop. Do I need just a regular HDMI cable?
I cannot connect my Probook 4430s to external monitor. I also have problems on the following device drivers. Are theDo I y related? need to download a new driver? What to download?All I want is to be able to use a larger monitor.
I have a brand new HP Envy X2 (15-C001dx) with Windows 8.1. So far it works fine by itself. I tried connecting an external monitor to the laptop using an HDMI cable from the laptop to an LG L246WPQ display. The problem is that 10-15% of the left side of the laptop screen content does not appear on the external monitor. Missing from the external monitor is the word "Start" in the upper left corner along with roughly the 2 leftmost columns of tiles. This occurs in both "Duplicate display" or "Only display on screen 2" modes. This is using a resolution of 1680x1050 which both the laptop and the LG appear to support. Using the touch screen on the laptop I can scroll the tiles to the right and see the missing leftmost columns. The information that is displayed on the external monitor begins as far left as that monitor will display. In other words, there is no black/blank area on the left. Except for the missing information on the left side, the content of the rest of the external monitor looks fine. I updated the laptop's video driver to the latest on HP.COM. No change in behavior. I tried every option I could find on the LG OnScreenDisplay, but nothing made the display any better.
I have connected my monitor to an external monitor. It works fine. Only problem I have ( and a little irritating one) is that the external monitor picks up display only after Windows is loaded. Pre-OS screens like BIOS settings, GRUB loader (I have Installed Linux ) doesn't show up)
Is this an issue with BIOS? Because, when I connect HP dv6000 to my monitor, I can see the BIOS screen as well. I am sure the problem is not with the monitor.
The BIOS is responsible for detecting displays before the OS is loaded right? I checked BIOS settings and there is nothing to indicate the display ports/devices (however, this page on HP website shows a BIOS screen "Advanced" which apparently has those settings)
I have MacBook Pro (late 2008) and I have WinXP installed in Bootcamp.
Recently I acquired a Dell SP2309W monitor that is capable of 2048 x 1152 resolution. When hooked to my MBP and start in WinXP, the external monitor works fine in EXTENDED mode. That is, I can move Windows to the external monitor. The MBP display is the primary display, where the Taskbar is displayed.
What I want to do is make the external monitor my PRIMARY display, with the taskbar shown there. However, the "Use this device as the primary monitor" is greyed out.
