(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop.
I have a Compaq 3000 Laptop, it's almost 2.4 Years old now, over the period of time I dint faced any issues with my Machine.it all started yesterday.
I was watching a movie on my Laptop yesterday, after sometime the screen froze up but the movie was playing as I was able to hear whats going in the movie.
Later I tried restarting the machine, what i get is the machine boots up properly, but the screen doesnt display anything thing, it shows up a blank white screen, sometime when the windows XP loading picture comes up the screen shows light distorted colors but again goes white blank.
I did approached a local vendor for that but he says that we need to replace on the motherboard, I was not much convinced over his explanation over the issue.
I would like to know your views on what might be the problem with my Machine.
I am going to try over connecting an external monitor and see if LCD is the problem, but I would like to know more what all possible options are there which might be affecting my machine and how much would it cost me in the worst possible case.
I purchased my laptop about two years ago. A few days ago, the screen suddenly dies, and on boot, it flickers a few times with the proper display, but then goes blank. The backlight seems to remain on though. When I use an external monitor with the HDMI port, the external monitor works fine, however the laptop screen remains blank. Here's a video of what it looks like when I first boot the laptop: [URL] .....
When I log on my hp sleekbook 14 pavilion laptop the screen goes blank. But I can see the cursor is moving. I can hear the windows sound. I can work on safe mode. Programs running but can't see anything. OS is win 7
Blank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx Product number: XB772PA#ACJ
When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
My HP Pavilion dvr-1200 CTO Entertainment Notebook PC has a huge problem. It will not display anything other than a set pattern of rotating block colors -it goes from red to blue to green to a shadow sort of grey with vertical lines, each lasting about ten seconds, than repeating over and over. You can hear the computer starting up, and you can get it to the start page by knowing when to press enter and when to scan your fingerprint; this is as far as I can get without seeing. I've had the problem for about two months; the unfortunate thing is after about a week, I decided to hook up a external monitor to it, and got a full picture, with everything but the screen display working great. Unfortunately, in excited haste, I decided it had to be a graphics driver issue, which would just mean an update or a completely new set of drivers. Great. But I accidentally deleted the drivers I had before I uploaded new ones, and the external screen I was using went blank.
My laptop pavilion dv6t 6b00 quad edition entertainment notebook pc. tripple booted with windows 8, 7 and ubuntu. was working nicely for a year and 35 days. today when I tried to start it, a blank white screen appears. no movement. does not work even with external monitor. even the start up hp logo does not come up to take me to bios. no movement. even lights don't change when I push the wifi or sound button on the keyboard. no external media. has super important data and loss can cause big problems.
My laptop shows me a blank screen after the windows bar loading screen. It did an automatic test on my hard drive to fix files, but when I restarted, it still would keep doing this test. I've tried to use a Windows Vista Upgrade/Recovery, but there is no backup and it keeps giving me an error on all types of restoration. I have just tried the Hard Disk Self Test and it says that there is an error #1 - 04 Fail. From what I've read in the forums, I will likely have to replace the hard drive, but how to recover the files from the old drive and what kind of drive I need to replace.
My laptop was working correctly and then I booted up one day, the bios worked fine but then the screen went black. I connected an external monitor to the lap-top and the laptop display works fine. As soon as I remove the external monitor, again, I get a black screen on my lap-top.
I have run the full system option of the Dell diagnostics and have 2 errors, battery and dvd flash rom. I have ordered a new battery. I have also noticed that my lap-top does appear to get quite hot.
I am working on my mom's Dell Inspiron n5010 Laptop. I have replaced motherboard, LCD and video/camera cable. Still getting 8 beeps until windows starts up. The video test worked fine on LCD.Flashed BIOS to A15, updated video drivers. Not sure what is still causing issue. I have also removed memory and replaced it. I am at my wits end.
The monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
I have an issue with my Inspiron N5010 screen, it doesn't work when switching on my laptop on Battery or AC mode. It happens a lot of times when I turn on the laptop the power button, the power indicators at the bottom turns on normally and the laptop is running without any weird sounds. But the screen is pitch black even doesn't show up anything when I concentrate on it in with a lamp or any light.
When I press the power button again even after 5 mins from the start time of being running the laptop just turn off immediately and doesn't take time to switch off as If the windows wasn't loaded!
I was resolving this problem by disconnecting the AC adapter > removing the battery > Pressing and hold the power button for 20 seconds technique.but today it doesn't work anymore, If there's anything I can do to get the screen backlight to work normally ....
I have a HP pavilion 15 laptop, 64-bit, windows8.1, i7, intel hd graphics 4400, Geforce gt 740m. The problem is that while watching online video(youtube) through the web browsers, first of all the video playing smoothly, but after a few seconds, the video stops a while, and then continue play but the video is freeze while the audio works fine, then it completely stops. I have smooth Internet connectivity, i have checked all the flash player on browsers, drivers are updated, except for Intel HD Graphics, current version is 10.18.10.3304 , while the newest version is 18.104.22.168.3496 (10.18.10.3496) 140mb, after downloaded and run, it says that my OS does not match.
All of the diagnostics have been run, multiple times to determine the BIOS light flash count blank screen issue, and all other suggestions run, including an additional monitor, with no success.
Hard drive, disc drive, everything works, or at the very least sounds like it is attempting to work as required on start up, just a blank screen. Final diagnostic points to the video card as the culprit? With all of the new systems available around $300, would like to know if it is the video card, and if it is worth the fix or just purchase an entirely new system?
My HP Envy dv6 recently did one of its updates and after that it restarted. Now when I turn my computer on it has the Hp logo, the login and after I log in nothing. There's just a black screen with a glow and the cursor. I know it's working because I can hear noises and the fan going but I can't see my desktop. But if I use the simple pass finger identification it will take me to the we page I saved on the designated finger. That's the only way I can get to the internet. I can't use anything else because I can't see my desktop. I can do ctrl alt del and that pops up but it doesn't do any good. I did the unplug everything, take out the battery, plug in AC adapter but not the battery , hold power button for 15 seconds then put the AC adapter but not the battery and turn on thing and nothing changed. I tried multiple restarts and shutdowns and nothing changed.
my studio 1747 (not in warranty) (i7 win7),has stopped booting anymore it was working fine till last week ( occasionally my screen does flick in last coupon of month), So when I do turn my system on all upper volumn light flashes from left to right and then right to left and then system turn off itself, during that period screen show no display.
connecting external monitor (TV via hdmi) does work and system boots fine show display on external monitor but no display on system LCD. Something display flicks on external montor also, it happens when my laptop LCD tries to display something (i.e. sometime laptop LCD flicks and sometime it display for few seconds and then go back to Black screen). Also when connect external monitor my mouse pad stops work and sometime works when I connect usb mouse, but when LCD screen start display something, mouse pad also starts work.I tried all stuff, whatever I could find on internet as below
1) Taking battery off and press power button for 1 min. 2) Hold 'D' key and then press power button LCD sometime show some color and then goes back to black. 3) Removed battery and CMOS battery to total drain of charges. 4) Removed keyboard panel and checked LCD display cable and make sure its not loose.
To me it seems like motherboard, graphic card are fine as system is working on external monitor, LCD screen also looks fine as sometime is display and not greying out (its either Black-out or display). As I have also checked cable is properly attached with motherboard, so it can't be loose connection. Don't understand why LCD works sometime.
I have a "compaq presario v6210US" which worked great for a while then it just shut itself off and restarted and the screen stayed black. Now it keeps restarting itself but the screen stays blakc. I can hear the fan and hard drive and everything else running the way it's supposed to. I heard that this has happened to a bunch of other people so it sounds like a defect to me. How do I get it fixed or do I just pull the hard drive, toss the Presario and get a competitors laptop?
I just got a problem today on my HP Envy notebook Product number = F7P58PA. It has working fine till yesterday night. It has windows 8.1 on it, and may be some updates are installed on it during the night (I am not too sure about it).
THe issue is that when I login to windows by providing my pin the start up screen does not show up. its simply blank with cursor showing only. ALT-CTRL DEL gives the task manager and I can run internet explorer through task manager run command but start up screen remains blank.
I have done battery, memory etc tests and nothing has resolved the issue.
I have an "HP ENVY TouchSmart Sleekbook 4-1115dx" laptop that is about two weeks past warranty and the screen went blank. I currently have an old crt monitor hooked up to it and everyting works fine with the machine -- just cant see the screen. Will i need to replace the entire display or can i just replace the chord/ribbon from the display thru the hinges to the main unit?
My computer starts and runs through the welcome screen but then goes blank. The screen is backlit, and the mouse is there and I can move it, but screen is black. I shut down the computer last night and I think I closed it before it was done with its business. Opened it this am and was blank.
I have removed the battery and I think I have followed the hard reset appropriately, but I have seen 2 different instructions one in a forum and one in HP support page, so I am not positive.
This computer was purchased only a few months ago and this is pretty ridiculous, right?
i have a HP 2000 nopebook PC and its giving me a black screen with no error codes or beeps. I can hear the startup sounds and see the screen brighten up and then gets dim. When I hook it up to an external moniter it comes up. I have tested the memory, the inverter, I tried draining the battery and I even tried updating the graphics card and still nothing.
I'm trying to set up the laptop to use an external monitor via HDMI. I tried a setting but it didn't work. However the laptop screen went blank and now I can't undo the changes.
On reboot, the screen works until the Window splash screen then it goes blank as the computer continues to boot up. Booting into safe mode works, but I can't access the graphics card properties from there.
Tried unplugging the HDMI cable, but doesn't work.
How can I bring back the default display settings without doing a hard reset? (It's not my own computer)....