HP Envy TS 4-1115dx Display :: SleekBook Screen Blank
May 2, 2014
I have an "HP ENVY TouchSmart Sleekbook 4-1115dx" laptop that is about two weeks past warranty and the screen went blank. I currently have an old crt monitor hooked up to it and everyting works fine with the machine -- just cant see the screen. Will i need to replace the entire display or can i just replace the chord/ribbon from the display thru the hinges to the main unit?
Laptop is only 9 months old. I did all of the updates and then my touchscreen stopped working - that was 4 days ago. Today I did a system restore to the point before the 1st critical update (9/24/14). It still does not work. Did it corrupt my driver? And if so, what is the name of the driver? How can I restore the touch screen...
Product: EOLO6UA#ABA System: x64 Processor: AMD A10-5745M APU with Radeon (tm) HD Graphics SM BIOS Version: 2.7 Microsoft Windows 8
My HP Envy dv6 recently did one of its updates and after that it restarted. Now when I turn my computer on it has the Hp logo, the login and after I log in nothing. There's just a black screen with a glow and the cursor. I know it's working because I can hear noises and the fan going but I can't see my desktop. But if I use the simple pass finger identification it will take me to the we page I saved on the designated finger. That's the only way I can get to the internet. I can't use anything else because I can't see my desktop. I can do ctrl alt del and that pops up but it doesn't do any good. I did the unplug everything, take out the battery, plug in AC adapter but not the battery , hold power button for 15 seconds then put the AC adapter but not the battery and turn on thing and nothing changed. I tried multiple restarts and shutdowns and nothing changed.
I just got a problem today on my HP Envy notebook Product number = F7P58PA. It has working fine till yesterday night. It has windows 8.1 on it, and may be some updates are installed on it during the night (I am not too sure about it).
THe issue is that when I login to windows by providing my pin the start up screen does not show up. its simply blank with cursor showing only. ALT-CTRL DEL gives the task manager and I can run internet explorer through task manager run command but start up screen remains blank.
I have done battery, memory etc tests and nothing has resolved the issue.
I just received a refurbished HP ENVY TouchSmart m6-k125dx Sleekbook. I can't set a resolution higher than 1366 x 768 though according to specs the native resolution is 1920 x 1080. I updated the Intel HD graphic driver and the BIOS but that did not work. Did HP possibly reinstall a wrong display as part of the refurbish?
I Have HP m6 Sleek Book Core i5 Laptop. I am using KMP Player to play videos. From Few Days my video is not resizing from touch screen like not zoom out nor zoom in. When i buy that laptop this functionality works fine for me. what was the issue
My Pavilion TS 14 Sleekbook running Windows 8 did two updates today that required restart for both. I don't know what the updates were, I have it set to autoload important updates. When I tried to "flip" my lock screen to enter my password to open, the screen did nothing but show energy waves around my fingertip. Used the keyboard to open to password page. Tried to pull up touch screen keyboard, nothing. Used regular keyboard to type in password and then the touchscreen works fine.
All of the diagnostics have been run, multiple times to determine the BIOS light flash count blank screen issue, and all other suggestions run, including an additional monitor, with no success.
Hard drive, disc drive, everything works, or at the very least sounds like it is attempting to work as required on start up, just a blank screen. Final diagnostic points to the video card as the culprit? With all of the new systems available around $300, would like to know if it is the video card, and if it is worth the fix or just purchase an entirely new system?
When I log on my hp sleekbook 14 pavilion laptop the screen goes blank. But I can see the cursor is moving. I can hear the windows sound. I can work on safe mode. Programs running but can't see anything. OS is win 7
I have a "compaq presario v6210US" which worked great for a while then it just shut itself off and restarted and the screen stayed black. Now it keeps restarting itself but the screen stays blakc. I can hear the fan and hard drive and everything else running the way it's supposed to. I heard that this has happened to a bunch of other people so it sounds like a defect to me. How do I get it fixed or do I just pull the hard drive, toss the Presario and get a competitors laptop?
Blank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx Product number: XB772PA#ACJ
My computer starts and runs through the welcome screen but then goes blank. The screen is backlit, and the mouse is there and I can move it, but screen is black. I shut down the computer last night and I think I closed it before it was done with its business. Opened it this am and was blank.
I have removed the battery and I think I have followed the hard reset appropriately, but I have seen 2 different instructions one in a forum and one in HP support page, so I am not positive.
This computer was purchased only a few months ago and this is pretty ridiculous, right?
When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
i have a HP 2000 nopebook PC and its giving me a black screen with no error codes or beeps. I can hear the startup sounds and see the screen brighten up and then gets dim. When I hook it up to an external moniter it comes up. I have tested the memory, the inverter, I tried draining the battery and I even tried updating the graphics card and still nothing.
I'm trying to set up the laptop to use an external monitor via HDMI. I tried a setting but it didn't work. However the laptop screen went blank and now I can't undo the changes.
On reboot, the screen works until the Window splash screen then it goes blank as the computer continues to boot up. Booting into safe mode works, but I can't access the graphics card properties from there.
Tried unplugging the HDMI cable, but doesn't work.
How can I bring back the default display settings without doing a hard reset? (It's not my own computer)....
I got automatic Windows up date last night. After the updates, I can't do anything except turn on the computer, see the HP page, the green log in with password page, then all goes dark blue and freezes. It will not even rcognize the keyboard to back out. It is an HP Envy 20 all in one desktop. I have removed the back, all looks good, everything is secured and in place.
My HP Pavilion dvr-1200 CTO Entertainment Notebook PC has a huge problem. It will not display anything other than a set pattern of rotating block colors -it goes from red to blue to green to a shadow sort of grey with vertical lines, each lasting about ten seconds, than repeating over and over. You can hear the computer starting up, and you can get it to the start page by knowing when to press enter and when to scan your fingerprint; this is as far as I can get without seeing. I've had the problem for about two months; the unfortunate thing is after about a week, I decided to hook up a external monitor to it, and got a full picture, with everything but the screen display working great. Unfortunately, in excited haste, I decided it had to be a graphics driver issue, which would just mean an update or a completely new set of drivers. Great. But I accidentally deleted the drivers I had before I uploaded new ones, and the external screen I was using went blank.
My laptop pavilion dv6t 6b00 quad edition entertainment notebook pc. tripple booted with windows 8, 7 and ubuntu. was working nicely for a year and 35 days. today when I tried to start it, a blank white screen appears. no movement. does not work even with external monitor. even the start up hp logo does not come up to take me to bios. no movement. even lights don't change when I push the wifi or sound button on the keyboard. no external media. has super important data and loss can cause big problems.
Today, I tried connecting an external display to my HP ENVY TouchSmart 15 laptop, via a USB hub, only to discover that using the touch screen points at the corresponding part of the external display rather than the inbuilt one (the displays are being extended). Can this be changed?
I'm using the same 64-bit Windows 8 installation and drivers that the computer came with.
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
I have a Compaq 3000 Laptop, it's almost 2.4 Years old now, over the period of time I dint faced any issues with my Machine.it all started yesterday.
I was watching a movie on my Laptop yesterday, after sometime the screen froze up but the movie was playing as I was able to hear whats going in the movie.
Later I tried restarting the machine, what i get is the machine boots up properly, but the screen doesnt display anything thing, it shows up a blank white screen, sometime when the windows XP loading picture comes up the screen shows light distorted colors but again goes white blank.
I did approached a local vendor for that but he says that we need to replace on the motherboard, I was not much convinced over his explanation over the issue.
I would like to know your views on what might be the problem with my Machine.
I am going to try over connecting an external monitor and see if LCD is the problem, but I would like to know more what all possible options are there which might be affecting my machine and how much would it cost me in the worst possible case.