Has anyone actually seen the usb charging port work? I had one on my e4200 and one on my e6400 and it never works. I have the laptop plugged in and turned off or in sleep mode. Plug my iphone into it and it doesn't charge... Even through it is all active and setup in the bios.
View 10 RepliesI don't charge my iphone thru the usb port thinking it'll weaken the battery of the notebook even when its plugged in, am I right about this ?
View 6 Replies View RelatedHP Chromebook 11 Model CB2 Purchased June 2014 Problems with charging for about half of that time. It has always been difficult plugging in the charger and is no longer possible due to visible damage of the charging port.
View 1 Replies View RelatedI have a Thinkpad Edge E520 1143 AK7, working on windows 8, 32 Bit Pro.
From somewhere in the settings I had disabled charging option on "alwyas-on" USB port since I did not possess a smart phone.
Now, I have a smart phone and wanted to re-instate the facility. However, I am unable to find the option to enable the settings.
I enabled all the 3 options from BIOS and "refreshed" the machine to default state.
The USB port charges when the system is booted and stops charging when I shut down the PC.
I have an older Inspiron 6400 (looks like the 1505) that isn't charging the battery. The bios indicates that the battery is charging, and that it is performing normally. There isn't a red flashing battery indicator, but when the laptop is powered on there isn't any "green light" indication of the battery, either. The AC adapter performs normally ( Charger is a PA10 (90watt) and it works fine on my D800, and charges that battery normally).
What I don't understand is why the BIOS indicates the battery is charging and that the battery is performing normally. However, when I have the system up and running there isn't a green battery indicator light on the button strip. Let me clarify that statement. During the initial boot phase of start-up there is the green indicator light on the button strip, but as the OS finishes loading this light goes out and the battery doesn't charge.
Could this be caused by a faulty Bios update, or is it something with the battery charging circuit of the motherboard? The laptop operates normally when using the AC adapter, just no indication of the battery charging when the OS is fully loaded. OS is Windows XP Pro (SP3).
what COM port my serial port is on my XPS M1710. Is there a program that I can find all this out in Windows that I just never knew about?
View 12 Replies View RelatedThinking about getting one to go with my m4500 which is on order. Reviews seem ok though some complain it's bulky and other complained the release mechanism wasn't great. Worst was that someone said their comp wouldn't boot when docked.
Can anyone share experience and/or high res pics of what one looks like?
My Laptop is 1 year and 5 months old. There are 2 problems I am facing with my battery:
1) When it is charging, at around 86% level, it stops charging and I see an orange light blinking at the battery icon and it continues to blink unless I turn the power off and allow the battery to discharge for a while.
2) at around 45% to 50% level, the battery level suddenly drops to 7% level and then I have to charge again.
Because of these issues I now use my laptop as a desktop. It is always plugged in and I use the option of "Stop Charging" in the windows power settings. how to solve the problem.
I have had my Dell Inspiron 1525 for around two years. For the past month, when my power supply is plugged in, the battery does not charge. It has been stuck on 3% and will automatically shut down when unplugged.
I have seen that this is a very common problem, however, when hovering over the battery icon it says: plugged in, CHARGING, where as all of the other posts that I have seen say: plugged in, NOT charging.
I have tried taking the battery out and restarting but this did not work. I also drained my battery and tried to recharge but again, this did not work. My initial thought is that I may need a new battery but I just wanted to check first.
I have just encountered a problem with my Inspiron 7520 laptop. The laptop is plugged in and notes 'charging'. Problem is that it is not charging and battery has been at 0% for a week now.
Battery meter notes the battery is charging and that the battery is working normally. I have run the 'My Dell' systems test and it failed on the battery with error code WBT02-GX1...
I've tried everything
The charger light still works (The blue ring)
[URL] downloaded the latest bios launcher but it is asking for minmum 10% battery but i have issue with charging and won't work
also i've ran the bois for it to say the ac adapter is [Uknown]
Here's my story and, let's say, my analysis:
I bought a generic 2 HD sata2 RAID1 enclosure based on the chipset Silicon Image SteelVine 5744. It can be used in USB or eSATA2. This embedded chipset (named SiL5744) is known (understand "claimed") to auto-handle Sata I/II and host sata2 controllers that not support the port multiplier feature. The HD are two Samsung F1 1To. There's no jumper to rollback to SATA 1.5Go on them, you can only do it by flashing the HD's bios, however we don't need to do it as I wrote just before, the SiL5744 supports SATA 3Go natively.
The enclosure works pretty well with USB, but *not* in eSATA : the E6500 freezes/hangs just after the POST step (a potential driver issue with the installed vista 64bits is not the reason then). As soon has I disconnect the eSATA cable, the system recovers and continues as normal.
What I've tried/done so far :
Both E6500's BIOS SATA mode AHCI and IRRT mode were tested,
Intel Matrix driver and software was updated to the latest 8.7.0.1007 version (AHCI and IRRT),
The SiL5744 chip was upgraded to its latest firmware as well (in case of...)
In order to verify the esata cable, the HDs and the enclosure itself, I succeed to :
- Use the enclosure's RAID1 feature when using the USB connection, I could partition,format, and read/write on the logical volume
- directly connect *one* HD (Samsung F1 1To) to the E6500's esata port -(I have a sata2esata cable), Vista installed it and I was able to use it as normal, even the hotswap feature seemed to work fine (I unkindly removed it). I could so test both HD individually this way... On the enclosure hardware side, everything looks fine then.
An IMPORTANT thing : The E6500's ICH8/9-M sata host controller seems to support the Port Multiplier feature *ONLY* on sata port 0 -as a bubble message from the Intel Matrix soft sometimes shows up-, but this is exactly where the internal HD is plugged on the motherboard I found nowhere you can change the internal sata port ID (switch,bios,ect...). I think this is the key of the problem that seems to be a dumb port conflict, because the esata port is in fact the port sata 4 (the DVDRW drive is sata 1, dock's esata is 5 for instance). If somebody knows how to swap the sata port ID, I think I won't be toasted !
i have a Dell Inspirion 2600 just did a clean wipe and install of windows xp all the new updates and all the drivers from the disc and checked for others on Dells site.
The usb ports will read a device will pull info off my memory stick and when i plug in my device i scan vehicles. But i show i have no com ports but com port 3 which is assigned to the modem.
I have checked the bios setting tried to created a port in the irq address with no progress.
I dont know what to do now someone suggested usinga PCMCIA card to set up com ports is there a fix to this??
Is there any port replicator from dell available for dell xps 16. If not does anybody knows about any other thrid party port replicator which is compatible with Dell XPS 16 ...
View 4 Replies View RelatedThere are apparently 2 models of the E Port Plus Replicators; model YP021 and model YP126. Does anybody know what the difference between the 2 are besides the prices (the YP126 is much more expensive)? Are they both compatible with all E Series Latitudes?
View 10 Replies View RelatedI have a Dell Studio 15 laptop and one of the USB ports on the right side of my laptop has become loose (I think it happened when I knocked it on something). Whenever I put a USB into the port I can wriggle it side to side & I can't do this with my other ports & until recently I couldn't do it with this one either.
When I put a USB into the port it isn't detected but if I push down on the casing above the port it sometimes is detected but the second I stop pushing down it's undetected again.
In particular pay attention to the port on the bottom. This is an "eSATA" port, correct? Now for the crazy question of mine: Is this eSATA port compatible with a male usb connector? I'm pretty sure it isn't, but would like to confirm before I try and destroy something
View 10 Replies View RelatedI thought I read in one of the threads that there was a way to power the USP port on a 1640 even when the lappy is turned off which would be great. Can someone confirm this one way or the other and if its true explain how to do it!
View 10 Replies View RelatedDoes anyone have experience with using the DVI connector on the Dell E-Port or E-Port Plus? I got an E-Port Plus from eBay listed as "new" and have it hooked up using the DVI connection with my new E6410 driving it (with NVidia 3100M graphics).
Black text on white background has a bit of a red glow to it that didn't happen with my older laptop/dock combo. I'm trying to figure out if it is a bad E-Port or if this is just the way the E-Port/E6410/3100M will be
I've just received a work Dimension E6400 with E-Port Replicator. I have two Dell 2001FP (max res 1600x1200) monitors that I have connected to the VGA port and the DVI port on the E-Port Replicator.
On the VGA connected monitor, I get 1600x1200 resolution. On the DVI-connected one, I can NOT get 1600x1200 (even with 16-bit color on one or both monitors). On DVI, I can only get max 1280x1024 or 1440x900.
I have tried all kinds of combinations but I can't get 1600x1200 out of the DVI. My E6400 has all the latest specs (I've checked) such as the latest BIOS, latest chipset (incl. graphics).
1. Is the E6400 capable of driving two 1600x1200 displays?
2. If I get a DVI to VGA converter and connect to VGA ports on both monitors, will I be able to get 1600x1200 on both?
3. If I buy a E-Port Plus Replicator and connect both monitors to the two VGA ports on that, will that give me 1600x1200 on both?
4. My old Dell monitors don't have DisplayPort connections (just DVI and VGA). Is there some way that I can connect the DisplayPort, on the E-Port, to a VGA monitor?
I found one of my laptop usb port is not working. The left usb port is not working and the right one is working. Don't know which port represent which version (2.0/3.0). I found universal serial bus driver is not installed. I can not find the driver so request you to provide me the link. If the driver is R309557, I already downloaded it. My bios version is A05.
View 1 Replies View RelatedHaving a problem with one of the USB ports on my XPS14z .. Port is the one adjacent to the HDMI port..
There is absolutely no signs of life from it at all, regardless of whether I connect USB 2 or 3 devices, usb drives etc. I've tried updating BIOS and CHIPSETS to absolutely no success.
[URL] .....
and also checked device drivers are installed as per
[URL] ....
but again no success. It cannot be seen in device manager or when I ran a diagnostics suggesting the whole thing is dead.
just got my new E6400 and I am having a problem with dual external displays. My displays are:
Samsung 204B (20", 1600x1200)
Dell 1708FP (17", 1280x1024)
The problem is the samsung only works using an analog VGA cable. If I even plug in the DVI cable, the samsung will not detect any output from the laptop/dock. I have tried installing the samsing display drivers, but that did not fix the issue. This was not a problem on my old thinkpad T41 that this new dell replaced, so although possible, I doubt the monitor has suddenly developed a bad DVI port.
If I use the Dell as the primary with the samsung hooked up using both cables, I can see two instances of the samsung, it just won't display anything until I pull the DVI cable.
My E6400 has the NVidia NVS 160 card. Running Vista 64 with the 64-bit NVidia drivers from Dell.
Dell Support said this feature is not supported by them however its there feature (What) anyways can some one tell me that has it working on a XPS 1640 how it is set in the BIOS and what else I need to try to get it to work.....
View 10 Replies View RelatedThe Dell D830 comes equipped with one powered USB port at the rear.
The powered USB port is compatible with USB 2.0 connector. When used with a powered USB connector that looks like a bloated RJ45, powered USB port can supply 5V (beige), 12V (blue), or 24V (red)..
They are color-coded and connectors are keyed to distinguish between them..
I just purchased a Dell Studio 1737, my first notebook ever. Here are the specs:
Intel Core Duo T6400, 2.0 GHz, 800 MHz, 2M L2 Cache
4GB DDR2 800MHz 2 Dimm
320G 5400RPM SATA Hard Drive
Intel Graphics Media Accelerator 4500MHD
Integrated High Definition Audio 2.0
(All for $830 with taxes and S&H. Good deal?)
I'm pretty happy with it so far, but I was wondering about the VGA output on the left side of the model. Supposedly it's only for output, but it's a female connection and I was wondering if I could make it work as a VGA input. (My desire is to play some Xbox 360 on it.) I'm using the Vista 64bit OS. Is it possible with this integrated card, or would I have to go out and try to upgrade it? Is it possible to upgrade the video card on the Studio non-xps .....
I just purchased an E-6500 and am considering buying a port replicator that i can use to hook up my external hard drive, monitor, keyboard, mouse, and printer.
I am looking for the cheapest replicator that takes up the least amount of space since space is limited right now. I have a few questions:
1) I can't figure out from Dell's website which port replicator meets my needs. Can anyone point me to the right model that is the best bang for my buck,
meeting basic needs mentioned above (a generic option is fine too--doesn't have to be Dell as long as it works)
I am also a M1330 owner but unfortunately, not a proud owner. I bought my laptop about one and a half year ago with one year warranty. During the first year it broke twice.
When I use my laptop at home (which is most of the time) I have it connected on a HP w1907v LCD screen. In both cases the VGA port just stopped working (initially I had some colour changes and then it stopped working).
They came and replaced my motherboard in both cases. Now I ve got the same problem again but my laptop is out of warranty.
I ll try to persuade them that they gave me a defective laptop from the start so hopefully they won't charge me (I doubt it though).
I currently connect my desktop machine to my AV receiver through optical digita SPDIF.
If I use the two DVI ports on the E-Port Plus for two separate monitors, will the DisplayPort carry proper 5-channel audio?
Or, is the only audio output supported by the E-Port Plus the 2-channel, analog headphone port? I'd like to purchase the E-Port Plus with the Precision M4400 and output audio in this fashion.
I've read that e-sata may or may not be powered depending on how the host is designed, does dell's e-sata/usb combo port self-power external 2.5" e-sata drives or do they need their adapters/usb cable used?
View 7 Replies View Related