i know it can take 2 drives inside but id still like to have a 2.5" modular bay for quick backups or for extra storage
and for those who question quick backup point i know i could do it through esata but i think its just tidier if i could do both
It seems that Dell still doesn't offer any Blu-ray drive for the new Precisions and Latitudes.Does anyone here know of a Blu-ray drive from any other manufacturer that fits into the new E-Modular bay?
Has anyone of you heard information about
when Dell may finally sell these drives?
im getting fed up looking around and i forgot to order a dvd writer for my e6500 as i done it over the phone but iv had a look in the bay and its only sata connectors which is dandy if i can find a sata dvd burner, but most importantly id need a coupla of caddys to mod or hack up so i have one for the hard drive and one for the dvd burner, dvd burner is a must have i dont know how i missed that one when ordering!
View 10 Replies View RelatedI'm trying to understand the options available for a secondary hard drive on the Precision M4400. When configuring a new M4400, a 'Second Hard Drive' option is shown, but the only options are either a 120GB 5400rpm HD 'E-Module' or 64GB SSD 'E-Module'. It also says the following:
Quote:
"Modular secondary storage devices can be used in both the system as well as in an External E-Modular Bay. They do not come with an external E-Modular Bay".
Here are my questions:
1) What does the 'E-Module' after the 120GB HD and 64GB SSD mean?
2) What is the Exterenal E-Modular Bay mentioned? A docking station or similar?
3) Could these options also apply to a Latitude E6500, although not offered directly from Dell?
When you order a new M6400 with only a single hard-drive, does Dell still include the 2nd empty chassis for my convenience? or do I have to pay extra for it at a later date?
Heston (The devil lives in the details!)
If you are, can you tell me wht model of Blu ray drive is installed?
Been looking into getting one,
It seems 9.5 mm high Sata Blu Ray drives do not exisit out there
So I've been trying to troubleshoot my M6400 frequent locking up problem. What ends up happening is my dual external screens just goes blank and I'm forced to a do hard shut down.
The initial restart sequence takes about 5 minutes as opposed to 1-2 minutes for a normal restart sequence.
I just noticed that my 2 hard drive RAID0 setup has 2 different hard drive brands. One Seagate and the other Fujitsu.
Both have the same specs when I open up the Intel Matrix Storage Manager, but I'm just curious if there's more to it that is not reported
I'd like to ask if anyone knows how to boot from a 2nd hard drive installed in the modular bay.
I've searched prior to posting but I couldn't find a definite answer.
The manual says to choose the option in bios but there is no such option.
I executed the performance index and everything was over 7.0 but the Hard Drive was 3.0, I have installed the Intel Chipset and SATA drivers, what else I should do ?, in Vista x64 I got around 6.0 for the disk,
View 10 Replies View RelatedMy Precision 4300 and Latitude D830 both had a modular bay that supported these batteries. They are extremely useful, as they're hot swappable and provide a boatload more power. I have 4 of them and can have power through any plane trip.
Looking at the models that Dell sells now, I can't seem to find any that would support modular batteries. It seems there is still a modular bay but no battery that would fit it.
Has Dell gone completely insane? That was the #1 feature that kept me with Dells all these years. Does anyone know anything about why they're not and if they will be supported again?
Yup me again, in my hunt to determine if M6400 is right for me as it costs just about as much as a used car, I want to make sure its a good investment before I buy it.
What is the main difference with the M6400 and the M6400 Covet?
I configured both with the same specs and the Covet is about $900 more in price?
Does orange paint really cost that much?
If you own an Inspiron XPS Gen 2 please let me know if there is an option in the bios "boot sequence" menu to boot from the modular bay.
View 8 Replies View Relatedi'm waiting for the M6400 I ordered. I didn't choose any of the Dell bags cause I wanted to get it myself.
So here's the question. Which bag to choose - especially regarding the big power supply.
I already did a search:
Targus - Atmosphere ....
I guess I'm about to get a mobile workstation. I already got an M90 it is great. Only one dead/stuck pixel and the front panel silver button paint came off in a few month of usage.
But I love it. So I am thinking of getting an M6400. Can you back me up on this one..?? Please if you own one tell me the pros and cons.. Have you noticed any Dead/stuck pixels.
What about built quality, feel, comfort, performance, heat, cooling, fan noise, screen quality ( thinking of LEG or RGB LED)..
Any creeking noise while opening the lid or holding or working on the laptop?? Any thing you can tell me about this beast of a machine will be a great help for me indeed
im about to buy my first laptop and just some things a want to clear out.
Whats the diffrent between a CCFL LCD and a RGB and E2E Silver LCD Panel?
And the diffrent between a LCD Back Cover : Silver with CCFL
LCD Back Cover : Silver with Regural LED?
my M6400 is here - just wanted to post some first impressions.
X9100 - 3.06ghz
4GB DDR3
Quadro 3700M
1440x900 WXGA+
Wireless 5300
Bluetooth 370
DVD+RW slot load
Silver Color
Backlit keyboard
Webcam
2x 80GB 5400rpm drives
2 Intel X25-M 80GB SSD drives will be replacing those 80GB's.
First - my first thoughts are that this system is Fantastic!
The screen is great - its an LG, fantastic colors, no dead pixels. Typical viewing angles for non LED screen, not great, but not noticeably bad either.
No noticeable bleeding, no graininess - very happy with the screen.
Ran 3Dmark 06 (1280x800, stock drivers) - 11,619
GPU temp was around 80 C - not bad at all.
So far, very happy. Putting the SSD ddrives in now - will post more thoughts as I do more. Will post pics ASAP.
Update 1: 2 80GB SSDs are in place - this has Intel's Matrix Storage which allows the creation of one RAID1 volume (which I will use for valuable data) and a RAID0 volume for the rest of the space - this is very nice - get the benefits of both types of RAID in one system!
Update 2: The power brick is completely absurd. Its HUGE - 210W. The good news is that I plugged in a 130W from a M4400 and although I get the popup about the AC adapter not being at least 150W, it does charge the battery and allow the system to run. To me, this is an acceptable alternative to lugging around the giant brick, at least for most things on the road - Later on, I will test the system with this adapter and see what kind of slowdown is caused.
Pics:
RAID Setup:
Next to a M4400 (that I believe I'll be returning very shortly):
Next to an older E1705 - these are virtually the exact same size - its astounding what new tech can cram into the same space
does anybody know when M6400 will be available with LED option?
I read - in some post - that the LED displays have quality issues.
if I order the notebook now (with CCFL option) can I upgrade to LED afterwards?
Whilst working away at my desk, M6400 docked it just powered down.
Pressing the power button causes it (the power button) to light briefly and then go out. Pressing FN+Power (as requested by Dell Tech) does nothing at all.
I've tried it with another PSU (I got 2, one with M6400, other with docking station) - and if you plug the PSU in, and then hit power on the laptop - the blue light on the PSU goes out - and doesn't come back on till the power is cycled. The M6400 does nothing during all of this.
The PSUs work just fine with my D820.
Dell techs are coming tomorrow to fix it. I'll let you know what they say!
Any experience installing Windows 7 x64 with the Precision M6400..
the Vista x64 drivers will work on Windows 7 x64 ?, it's faster or better..
I've just bought a refurbished M6400. It comes with no preinstalled OS. I have a dell install disk for Windows XP SP2. Is it ok to install this on my M6400? I will then update to SP3 over the web.
I guess i will also need to install drivers for the graphics card, etc etc.
Please let me know if you have any advice and pitfalls to watch out for.
I'm also considering adding a second hard drive. What drive specification do i need?
I know this is a workstation, and not a gaming laptop, but I still want to use this machine for some after-hour gaming.
What I find odd is that the HP 8730w (which was recently reviewed) got scored a massive 14,263 at 1280x800 resolution,
but the Dell M6400 seems to around 11,600+/-. Odd considering the Dell M6400 is a more powerful system?
I recently noticed that you can not configure a 64bit covet any more, which results in not being able to configure more than 4GB Ram. Also, the covet has only a few specified configurations that are allowed.
Is there an issue with the 64bit? Anyone know why Dell removed the 64bit options?
In 1Gb+2x2GB config ?
View 10 Replies View RelatedI find the noise of the fans of my M6400 quite disturbing.
It is certainly much louder than the noise from my M6300 (also a 17" high performance laptop), or my former D810
The fans kick in quite often after short periods of being off.
Is there a way to slow down the fans or have them off for longer?
Is there a compatible fan in the market that is quieter?
Heard that ATI FirePro M7740 is coming to M6400 soon (no pricing available yet).
This card is already mentioned on dell's official M6400 covet tech spec:
http://www.dell.com/us/en/business/n...ov&cs=04&s=bsd .....
Which is the best (most efficient) laptop cooler for the M6400?
I am zeroing in on the Antec 200. Apparently more efficient temperature wise than the Zalman NC2000
i saw this searching the outlet
http://outlet.us.dell.com/ARBOnlineS...X2F&POPUP=true
was under 4400 after rebate i think its a great deal fully loaded
My Intel SSD X25-M will be arriving in a few days. Lets hope it has the latest firmware..
But is there anything i need to know before i put the SSD in the laptop and proceed with the installation. I understand there are a couple of things I need to do in BIOS and one of them is to change the SATA setting to AHCI???? ATA?? instead of RAID. And then after installation i change it back to which one???
I would do a search on the forums, but its the crappy search tool which makes its hard for me to do a specific search.
I've been looking at the ThinkPad W700, but I've recently noticed the Dell Precision M6400 as well.
Both machines are pretty pricey, though. I know there aren't usually many sales or other deals offered on the Lenovo workstation-class notebooks, but is it pretty much the same for the Precision line?
Aside from coupons (if they even offer coupons for Precisions), are there any other tips for getting the best deal possible on one of these machines?
When it comes to dropping $3k on a machine, I think it would make me physically ill to do so, only to find out later that I payed more than I really needed to.
Is it possible to connect more than one eSATA device to the external eSATA port?
<wishes that Dell had a user guide for their flagship product>