Whilst working away at my desk, M6400 docked it just powered down.
Pressing the power button causes it (the power button) to light briefly and then go out. Pressing FN+Power (as requested by Dell Tech) does nothing at all.
I've tried it with another PSU (I got 2, one with M6400, other with docking station) - and if you plug the PSU in, and then hit power on the laptop - the blue light on the PSU goes out - and doesn't come back on till the power is cycled. The M6400 does nothing during all of this.
The PSUs work just fine with my D820.
Dell techs are coming tomorrow to fix it. I'll let you know what they say!
I am at my wits end with my e1705. I had a sudden meltdown about 2 weeks ago... screen went scrambled, BSOD,etc...
Performed diagnostic, memory on video card came back as bad. Replaced with new card (from Dell), reinstalled OS, completely reinstalled nVidea drivers from Dell (Used driver cleaner too)...
Everything went smooth for a couple hours after this was completed yesterday (full diagnostic showed no errors), but after booting up today, after about 5 or 10 minutes of use screen freezes and turns either solid cyan or black... a small pattern of thin lines appears also.
Yup me again, in my hunt to determine if M6400 is right for me as it costs just about as much as a used car, I want to make sure its a good investment before I buy it.
What is the main difference with the M6400 and the M6400 Covet?
I configured both with the same specs and the Covet is about $900 more in price?
I was playing stalker a few days ago getting 50-70 FPS and now come today its so much lower at 20-30(not playable) and I tried CS:S, and COD4, and they all seen dramatic fall in FPS. I don't notice any artifacts but I just notice huge FPS hits. I also think my fan isn't running anymore but I am not sure. Does anyone one know what I should do now? Its out of warranty already.
I guess I'm about to get a mobile workstation. I already got an M90 it is great. Only one dead/stuck pixel and the front panel silver button paint came off in a few month of usage.
But I love it. So I am thinking of getting an M6400. Can you back me up on this one..?? Please if you own one tell me the pros and cons.. Have you noticed any Dead/stuck pixels.
What about built quality, feel, comfort, performance, heat, cooling, fan noise, screen quality ( thinking of LEG or RGB LED)..
Any creeking noise while opening the lid or holding or working on the laptop?? Any thing you can tell me about this beast of a machine will be a great help for me indeed
2 Intel X25-M 80GB SSD drives will be replacing those 80GB's.
First - my first thoughts are that this system is Fantastic!
The screen is great - its an LG, fantastic colors, no dead pixels. Typical viewing angles for non LED screen, not great, but not noticeably bad either.
No noticeable bleeding, no graininess - very happy with the screen.
Ran 3Dmark 06 (1280x800, stock drivers) - 11,619
GPU temp was around 80 C - not bad at all.
So far, very happy. Putting the SSD ddrives in now - will post more thoughts as I do more. Will post pics ASAP.
Update 1: 2 80GB SSDs are in place - this has Intel's Matrix Storage which allows the creation of one RAID1 volume (which I will use for valuable data) and a RAID0 volume for the rest of the space - this is very nice - get the benefits of both types of RAID in one system!
Update 2: The power brick is completely absurd. Its HUGE - 210W. The good news is that I plugged in a 130W from a M4400 and although I get the popup about the AC adapter not being at least 150W, it does charge the battery and allow the system to run. To me, this is an acceptable alternative to lugging around the giant brick, at least for most things on the road - Later on, I will test the system with this adapter and see what kind of slowdown is caused.
Pics:
RAID Setup:
Next to a M4400 (that I believe I'll be returning very shortly):
Next to an older E1705 - these are virtually the exact same size - its astounding what new tech can cram into the same space
I have been using my Dell XPS M1210 for 2.5 years now. It has been a great laptop, only big issue has been a dying battery which is something that has occurred to most close friends that own the same model. Recently, my laptop shut down on its own. After this occurred, it wouldn't start up again. When I hit the power button, no sound comes out of the computer. There is no noticeable hard drive spin, fan noise or anything. The screen does not flicker or show any sign of life. The power LED shines for 5 seconds and then goes down.
I tried FN+Power button to no success. Also, if I leave the power button pushed down, the power LED flashes after 5 seconds and continues to stay on until the next 5 seconds doing a cycle that only ends once I stop pushing the button. I tested my battery on another XPS M1210 and it worked well. Also, I tested another battery on my XPS and it did the same thing.
I am currently out of warranty. I don't know what to do to test the failing component. Since I don't know what the specific problem could be, I don't know how much a repair could end up being.
My XPS M1210 laptop is dead right now. It happened last friday morning when I am trying to turn on the laptop. After I press the power button, the hard drive sounds spinning, but after a second, it remains silent (Same for the cd-rom). Only the power led is on.
All other leds are dead, not even the bluetooth, cap led, number lock led. So I connected my laptop to a external monitor, but nothing is showed. I have inserted a boot disk, but it doesn't work. I also tried to press Fn and power button method, but it still doesn't work as well.
Right now, I am suspecting my hard drive is broken or some virus infected my laptop because a day before my laptop is still working, my laptop got infected with some virus.
When I opened my inbox, my laptop suddenly got out of control. The cursor jumped around the screen and there was some bar code surrounded the cursor. But after I restarted my comp and did some virus scan, nothing was found. However, the next day, I turned on my laptop, the screen/images were all messed up. The images were chopped into piece. But in safemode, things are looking perfect. So I shutted it down and planned to reformat the laptop. AFter that, I am not able to turn it on again.
I just went on the Dell website and I think that they stopped producing the Mini 9. I suppose that the Mini 10v has replaced it now...
If I'm not mistaken, that's the first netbook to die. (apart from the never good cloudbook and first gen eee's)
I always thought that system was a cute little one. I was attracted to it for some reason. I'm sorry to see it go. I wish they offered more HDD / SSD space though.
Either my battery is dead or something in my laptop is wrong. an Orange led is flashing in the right cornor of my laptop (not on the screen)
Its the battery charge led its flashing non-stop ! My laptop only runs when the power charger cable is connected this means my battery dont charge or is dead ?
My Dell XPS 9100 laptop just went stone dead, no lights, charger or otherwise and happened while I was not looking. With no power apparent from battery or AC charger, no other indicators are known.
So after having my motherboard replaced before Christmas due to GPU issue, my notebook decides to shut itself off, and I am unable to turn it on.
This is < 2 months since the motherboard was replaced.
It is literally a door-stop!
After talking to the technician on the phone, it looks like they will try to repair it after I send it in. If they can't, he said I probably will get a new notebook (but don't count on it!).
Ok so I'm on an apple right now trying to get help for my Dell XPS M140. I have a simple question and I would appreciate any feedback.
A long time ago when I had to reformat the pc I called Dell support and they told me there are 2 keys you can press at boot-up and it will automatically reformat my computer. I forgot what the keys were that I press. I called dell to ask but because my warranty is expired they want $40 for 1 hour of support.
So this weekend I finally have some time to play around with my shiny new Inspiron 1545, and during Vista restarting I found 2 dead pixels on my LCD screen. I called tech support, and they said that because I don't have on-site service I will have to send the p.o.s. through a courier to their depot in Newmarket to replace the whole screen, which will take 10 days.
Naturally I'm nervous that they will screw something up or that the system will get damaged during shipping or whatnot, leading to even further delays.
I tried telling them that I shouldn't have to wait for 10 days due to the nature of my work and the fact this is a business plan and I want them to make an exception and send a tech here to fix it. After all, this system is only 2 days old. They want me to purchase the on-site warranty for $200 for them to send someone out OR pay $60 for each incident.
Is there any recourse I can take, perhaps escalate it to a manager who may make an exception?
They tried telling me that even for the 2 pixel they were making an exception as the "law" says that up to 5 deal pixels is fine. What "law" are they referring to exactly? Haha... Brutal. Last time I buy a Dell that's for sure. Is there any re-course, such as escalating it to a manager?
I've just bought a refurbished M6400. It comes with no preinstalled OS. I have a dell install disk for Windows XP SP2. Is it ok to install this on my M6400? I will then update to SP3 over the web.
I guess i will also need to install drivers for the graphics card, etc etc.
Please let me know if you have any advice and pitfalls to watch out for.
I'm also considering adding a second hard drive. What drive specification do i need?
I recently noticed that you can not configure a 64bit covet any more, which results in not being able to configure more than 4GB Ram. Also, the covet has only a few specified configurations that are allowed.
Is there an issue with the 64bit? Anyone know why Dell removed the 64bit options?
Heard that ATI FirePro M7740 is coming to M6400 soon (no pricing available yet). This card is already mentioned on dell's official M6400 covet tech spec:
