Dell :: High Temps On My 1530
May 2, 2010My xps 1530 has been on for about 2 hours. GPU at 95C; 202F, and noticeable slow downs are occurring.
View 3 RepliesMy xps 1530 has been on for about 2 hours. GPU at 95C; 202F, and noticeable slow downs are occurring.
View 3 RepliesI am noticing my second m6400 (Qx9300, Nvidia 3700, Vista64 Ultimate, A03 bios) is behaving differently than the first. The fan is pulsing on and off at idle (left hand fan) and it's driving me nuts.
I checked with speedfan and HWmonitor and notice that it idles 59-61 degrees celsius. I think this appears to be a lot hotter than other's temps I see here. (I saw someone mentioning they idle @ 39C)
It seems my idle GPU temps are pretty high. I just embarked on a mission to clean my fan out. I believe I was successful, but the whole thing was a little out of my comfort zone.
I'm now experiencing slightly cooler GPU temps i think (around 42-46 C at idle) but the GPU temp at idle is at a very steady 68 - 69 C, and the fan just keeps running all the time. Maybe I should have paid more attention to what the temps were beforehand, but it's too late for that.
Was wondering if this was something to be concerned about. Do I possibly have a bad contact between the thermal system and the GPU, and should I try and connect it more securely?
Running a t6600 2.2ghz c2d.
Wondering if these temps are acceptable in a laptop or not?
Temps idling 3-10% cpu = 57-67C
Fan feels the need to go into hairdryer mode every 5 minutes or so to bring the temp down a few C.
under load core 1 + 2 = 100%
core 1 = 88-90C
core2 = 90-92C
Also i will add this is currently in a very cold room.
would you say these are acceptable temps or not?
also not overly impressed with the build quality. keyboard bezel popping out in certain sections after 4 months.
My cpu core hits the mid 90's when gaming. i undervolted it to 1100v @ 11x and the temps only hit the high 80's/low 90's during gaming but hit the mid nineties in orthos and was still going up.
This is getting me down a bit cus the cpu ramps down during gaming and screws up the fps, and also im outside of the uk so cant get my laptop to dell (there are no dell suppliers where i am)
does anyone have any idea what might be wrong. am i reading the temps correctly? speedfan shows much lower temps (in the 70s) however cpuz, rightmark and hwmonitor all show temps consistent with eachother.
Its a t7500.
there's nothing blocking the outake at the back; i lifted the laptop up during orthos to let air out of the bottom but it didnt make any difference.
I've built a few desktops but i havent really tinkered with this laptop apart from adding more ram.
My friend bought a Vostro 1700 a few years ago and now i own it, but in the last 6 month or so the temps are going through the roof, i switch it on and it starts off at about 72 degrees then just goes up to about 86 and stays there, i cleaned the fan, the vents and even put a new blob of thermal paste on the cpu but it still does the same. I just did the Dell PC Diagnostic test and it says there are no hardware problems at all..Â
View 6 Replies View RelatedHaving spent a while looking at what cooler to get for the 1530 and reading various contradictary things (especially about this cooler) I just thought I would post what I have found.
Due to most of the heat coming out of the top left vent of the 1530 and the layout of vents on the zalman, I tend to just pull the notebook forward a touch, it doesnt slide on the cooler so I dont find it a problem
I have a VPC-Z11Z9E it has an i7 620m CPU.
When idling it hard to get under 50°c for the CPU.
And when playing CPU get awful temps...
here it is
I have been playing UT3 max details at 1366x768 resolution against 7 other bots, for only 10 minute.
Is that normal ? Does your i7 reach such temps ?
What are the temps of an i5 when playing recent games ?
Alright, so to start off I'll just say that I love the DV2. I bought the dual core version loaded when it first went up for customization at the HP site. I have, however, noticed that it can run a tad hot.
When I first got it, without a cooler, the CPUs usually went from between 41c-45c from light usage, and the GPU from between 51c-55c. Even when propping the back up I only saw a drop of 1c total. I bought a small cooler for it and saw a fairly good drop. The temps of the CPU where down to 36c-39c and the gpu was down to 45c-49c with both sometimes even going lower depending on how much the AC in the house was on.
I did try some gaming on this, playing some HL2. The CPU got to 60c at the highest and the GPU also only got to about 60c while on the cooling pad.
So, a few days ago I updated my BIOS to the latest on for the DV2 from the HP site. I noticed right away that my temps where higher. The temps while on my cooler where the same as they used to be without it, and with the cooler off the GPU was getting up to 60c while at idle. I tried a few things, like setting the GPU to low power mode with the Catalyst controls, but that didn't help.
Not sure what to do I noticed this morning that I hadn't gotten SP2 for Vista yet. So I decided to get it in hopes that it would help.. now my DV2 is even hotter. On the cooling pad my CPU was at around 60c and GPU was at 65c while at idle. I've had it on all day, with all the vents in my room open and the AC up high and the lowest it's gotten is to 50c for the CPU and 55 for the GPU.
So my computer is hitting temps as high as 103 degrees Celcius according to atiTool. And by the way this is without overclocking. Its pretty clean inside (no dust and stuff). Im pretty site this is not normal...I may even call Dell about it. I have complete care for three years...
View 15 Replies View Relatedis there any possibility to undervolt my ATI HD Radeon 4650 Mobility?
View 4 Replies View RelatedMy CPU is hitting around 90°. Inside of the laptop is clean, isn't a dust issue. Could probably do with reapplying thermal paste.
Â
Most likely culprit, however, is the fan is not hitting full speed under Windows 7 x64 regardless of the CPU temps.
Â
It works fine in the BIOS before the W7 splashscreen starts, so it isn't a problem with the fan itself, but as soon as W7 begins booting the speed drops substantially (I can only just tell it's spinning) then stays there. Given Acer's unusual way of handling their fans Speedfan and similar are no use as the fans don't show up.I've updated to the latest BIOS and even tried installing the ePower application, but the problem is still there.
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
I've been wondering if my laptop is overheating? Playing battlefield 4 at ultra settings. and my temp at cpu is 91 degrees and temp at gpu is 84 degress. gpu load 99% playing for an hour.
idle temp is 48-50. is this ok?Â
Recently I have purchased the Acer v15 Nitro Black Edition gaming notebook. Though I've noticed that not very intensive games are stressing my CPU to about 80-90C, which I am not entirely certain is the norm. This seems to happen primarily when the laptop is plugged in, as temps seem relatively stable when unplugged. I recently turned my CPU power down a bit (to 96%), and that has seemed to keep my temps relatively stable.
I guess my question is: Is this normal? I feel like those temps are way too high, and I fear of burning out my CPU. I am going to pickup a cooling pad today, and start using it when I play games. I am relatively certain my fans are working, but my CPU temps jump around quite a bit. I know gaming laptops are built to get hot, but the last thing I want is to burn my new toy.
i set up this thread to compare the temps between windows 7 and windows vista. i googled for it but there's no comparison chart. please feel free to contribute.
windows vista:
idle: 62-65
under load: 77-85
windows 7:
idle: 55-60
under load: 70-80
i see that windows 7 runs noticeably cooler than windows vista. Please post your details so that other users can have an idea about what to choose if they decide to bootcamp windows.
I have been having an issue with heat cpu temp on load hit 89 'c what should i do to get this lower ?
i have a Studio XPS 1640
I have an XPS M1530 with a T7500 and 8600M GT.
These are my temps when just web browsing and not doing anything too intensive.
These are the temps I got when running the NVIDIA geoforms graphics demo.
These are the temps I got when running prime95.
here is a excerpt of my results from thermal analysis tool whilst running cinebench.
Intel® Thermal Analysis Tool: v 2.05.2006.0420
Processor: Pentium® M Processor (6FXh)
Microsoft Windows XP Professional Service Pack 2
OS version: 5.1.2600 (Build 2600)
On Demand Clock Modulation [Processor 0] : Chipset: 0-0 Processor: 0-1
On Demand Clock Modulation [Processor 1] : Chipset: 0-0 Processor: 0-1
Driver Version: v1.0
Power Source: AC
Workload library returns Context: 0x1
Polling Period: 2000 mSec.
On Demand Clock Modulation [Processor 0] : Chipset: 0-0 Processor: 0-1
On Demand Clock Modulation [Processor 1] : Chipset: 0-0 Processor: 0-1
14:09:13: ** Monitor Started **
14:09:13: Processor 0 : CState [C0/C1] --> [C3]
14:09:13: Processor 1 : CState [C0/C1] --> [C3]
14:09:13: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:13: Processor 0 : DIGITAL TMP[ 37°C ]
14:09:15: Processor 0 : DIGITAL TMP[ 36°C ]
14:09:17: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:17: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:26: Processor 1 : DIGITAL TMP[ 38°C ]
14:09:28: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:28: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:30: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:32: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:34: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:34: Processor 0 : DIGITAL TMP[ 37°C ]
14:09:34: Processor 1 : DIGITAL TMP[ 38°C ]
14:09:36: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:36: Processor 0 : DIGITAL TMP[ 36°C ]
14:09:36: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:38: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:40: ACPIThermalZoneTHM__0 TMP[ 37°C ]
did you find your temps to be the same turbo?
I've had my M1530 for almost 11 months now and I noticed this discoloration on the palm rest but more importantly are the temps. The CPU is hitting 97 degrees Celsius and the GPU is hitting at 94 degrees Celsius. I first noticed this after several hours of video conversions then I ran ORTHOS to replicate the results. Should I ask for a technician to replace the mainboard or heatsinK? I've tried to raise the issue with the GPU running at this temp before but to no avail. However, this is the first time the CPU has hit such high temps.
[url]
I've got a Precision M4400 for which I did some DIY upgrading... Specifically, I put in a T9900 (3.06GHz, 35W TDP) processor and a 256Gb SSD. You can see the specs in my signature, actually.
The problem is that my temperatures seem to be going pretty high. Realtemp is saying that once I turn on the laptop, both CPU cores are at around 30-35 C. But after a very short while, this heats up to the mid-40's. And if I play Sims 3, let's say, the temperature can go up all the way to the high 70's. The GPU seems to stay at under 80 C, which I think should be fine .....
just installed fx2500 into my 9400.. everything working great..
What should I expext the temps to be running at ... Seems hot... I could keep my 7900gs under 60c by keeping my 18kgui program runnin fans on high while playing Cod4 or CS:s... now the gpu peaks out at 70-72c...
i was wondering what the temps you guys are getting on your 8700 sli setups running games like crysis and such. i'm running crysis for example at 1280x800 or something, cant remember off hand, everything set to medium. game for about and hour and a half and my temps only showed to reach around 62C. now this is using i8kfangui and offsetting the gpu temp by 8. i'm not using the program to handle the cooling, just monitor the temps. i guess i was just expecting the temps to be higher, not that its bad, i guess maybe the cooling and bios on this laptop just work better than on a 1705. seems that i hit 70C almost daily on that thing depending on the game i was running.
View 10 Replies View Related2 weeks ago I noticed that my m1530 got really hot to touch after a period (~1hour) of web browsing. So I called Dell and they replaced my heatsink and CPU fan
My current temps now are as follows:
ACPI : 41-58
GPC : 58-69
after 1/2 hour of COD4, my max temps were
ACPI: 71
GPU: 79
(Used CPUID Hardware monitor)
Also I am running Win7 Pro (x64) with a NC2000 notebook cooler
Recently I bought a Dell xps 13 1340 with p8600 and a 9500GE.
I viewed all the discussions about it and I know it has a heating problem, even thou I decided to buy it - once I saw it I just couldnt look at anything else...
Anyway Im running it with the A07 bios and all new drivers from dell's website.
When Im running it on heavy load like a game the 9400 GPU reaches to 86c.
The 9200 is around 75c. CPU is 74c max .....
ive got a xps m1530, with a t5550 processor.
While gaming im reaching 90°C.
Should i contact dell ? I bought this laptop on july 2008 without any extra warranties and i think that i have 1 year only of warranty that comes for free right?. The downside is that im in south america so it might take a while...
Can i contact them and a get a replace?
I put my 7950 gtx at 620//675 and I was testing with atitool .26 which I just downloaded and didn't change any settings. No artifacts for about 45 minutes, but atitool reports my temps in the system tray, and it got as high as 88 degrees. That seems pretty high, is that bad?
View 10 Replies View RelatedI always knew my comp ran hot, but not until I got HWMonitor today did I know how hot. I did a load test and CPU/GPU and ACPI temps went to 90. CPU and ACPI temps would drop to 65 ish after this, but the GPU stays kind of high in the 78-85 range. (Anyone know why this is happening?)
Also, when playing games, my temps are almost all at 87-90 all the time. I thought it might be my bios (A12), so I switched back to A09. This did not change anything.
Basically my question is, should I be calling dell support to take a look, and what do I tell them? I've never had computer warranty before. Or is there something else I can do to fix this? It's very hot to type on and sit on my lap.
A last question, these temps are being measured currently with the laptop on my desk, with the lid closed and an external monitor/keyboard/mouse plugged in. Is this causing increased temps? Should I be leaving the lid open?
In short: My e1705 with a quadro 2500m is idling at temperatures at least 10 degrees celsius higher than it was before: 70 degrees with slow fans compared to ~60 with slow fans (I had fans kick in at 65 to bring it back to 60). There have been no hardware/software changes to the system.
So I read the guides about applying AS5 to your GPU and I thought I'd try to get better temps.
I cleaned off all the old compound from both the GPU and the heat spreader, and placed about a pea-sized piece on the GPU (see attachment). It wasn't the most perfect blob of AS5, but volume-wise I think it was pretty close, and ideally it would be smoothed out when I tightened the screws on the heat spreader.
I stuck to a "less is more approach" having heard that all I needed to do was fill the minor imperfections of the contact surfaces.
I just got my 1730 today and it's quite awesome.
However upon downloading hwmonitor, it seems my temps usually hover around mid 60s and go to 75s quite often making the fans come on. Is this normal?
And I live in the bay area pretty close to San Francisco, so the weather here is usually pretty cool