Having spent a while looking at what cooler to get for the 1530 and reading various contradictary things (especially about this cooler) I just thought I would post what I have found.
Due to most of the heat coming out of the top left vent of the 1530 and the layout of vents on the zalman, I tend to just pull the notebook forward a touch, it doesnt slide on the cooler so I dont find it a problem
I know some SXPS 16 owners were considering this, and I just received mine in the mail today.
I posted my review of it here http://forum.notebookreview.com/show...23#post5093023
My xps 1530 has been on for about 2 hours. GPU at 95C; 202F, and noticeable slow downs are occurring.
View 3 Replies View RelatedI got a new 6-Cell battery from Dell for the M1530. I had a 9-cell before. All is well. Only issue is, with the 6-cell, if I place the laptop on the Zalman NC2000, the foot rests are not even. The back right foot rest, is lifted and there is this wobble.
Now, I did check if its fine on a normal, flat desk and the laptop sits perfectly fine, even on all four rubber foot rests.
BUT - with the 9-cell, the laptop sits well on the Zalman NC2000 (and also on a normal, flat table!)
I am confused as to why with the 6-cell it doesn't like to sit evenly on the Zalman???
To summarize:
6-cell on a normal, flat table - all is well, no wobble.
6-cell on the Zalman NC2000 - Back right foot rest (of the laptop) is in the air, hence there is the wobble. * Why?
9-cell on a normal, flat table - all is well, no wobble.
9-cell on the Zalman NC2000 - all is well, no wobble.
By the way, the zalman itself is fine, sitting well on all four corners on the table or on any flat surface!
How are these working with your Studio XPS 13/16 notebooks?
My wife has a 13 and I have a 16, and we're needing to pick up a couple coolers for game sessions.
To be blunt, I find myself doubting that they could provide a truly outstanding performance on the XPS due to the vent placement on the cooler in relation to the intakes on the XPS.
In fact, when I look at a top-down view of the coolers and the bottom of our laptops, the vents really only get about 10% coverage.
Does anyone have any other coolers they are running that better then the zalmans? If they're the best then I'll grab a 1000 for the wifey and a 2000 for myself.
Just looking for some info on the Zalman ZM-NC1000 Notebook Cooler please. I've read a few reviews but none specific to the dell
View 10 Replies View RelatedI've been looking at the 12 cell battery to go along with my dv5t for the extra battery life. I know that the 12 cells battery raises the back part of the dv5t up quite some bit. Would that negate or 'contradict' the use of the colling fan (Zalman NC1000). Since the battery pack is elevate, the full laptop wouldn't be able to make contact with the cooling fan, correct?
View 5 Replies View Relatedi set up this thread to compare the temps between windows 7 and windows vista. i googled for it but there's no comparison chart. please feel free to contribute.
windows vista:
idle: 62-65
under load: 77-85
windows 7:
idle: 55-60
under load: 70-80
i see that windows 7 runs noticeably cooler than windows vista. Please post your details so that other users can have an idea about what to choose if they decide to bootcamp windows.
I have been having an issue with heat cpu temp on load hit 89 'c what should i do to get this lower ?
i have a Studio XPS 1640
I have an XPS M1530 with a T7500 and 8600M GT.
These are my temps when just web browsing and not doing anything too intensive.
These are the temps I got when running the NVIDIA geoforms graphics demo.
These are the temps I got when running prime95.
here is a excerpt of my results from thermal analysis tool whilst running cinebench.
Intel® Thermal Analysis Tool: v 2.05.2006.0420
Processor: Pentium® M Processor (6FXh)
Microsoft Windows XP Professional Service Pack 2
OS version: 5.1.2600 (Build 2600)
On Demand Clock Modulation [Processor 0] : Chipset: 0-0 Processor: 0-1
On Demand Clock Modulation [Processor 1] : Chipset: 0-0 Processor: 0-1
Driver Version: v1.0
Power Source: AC
Workload library returns Context: 0x1
Polling Period: 2000 mSec.
On Demand Clock Modulation [Processor 0] : Chipset: 0-0 Processor: 0-1
On Demand Clock Modulation [Processor 1] : Chipset: 0-0 Processor: 0-1
14:09:13: ** Monitor Started **
14:09:13: Processor 0 : CState [C0/C1] --> [C3]
14:09:13: Processor 1 : CState [C0/C1] --> [C3]
14:09:13: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:13: Processor 0 : DIGITAL TMP[ 37°C ]
14:09:15: Processor 0 : DIGITAL TMP[ 36°C ]
14:09:17: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:17: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:26: Processor 1 : DIGITAL TMP[ 38°C ]
14:09:28: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:28: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:30: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:32: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:34: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:34: Processor 0 : DIGITAL TMP[ 37°C ]
14:09:34: Processor 1 : DIGITAL TMP[ 38°C ]
14:09:36: ACPIThermalZoneTHM__0 TMP[ 37°C ]
14:09:36: Processor 0 : DIGITAL TMP[ 36°C ]
14:09:36: Processor 1 : DIGITAL TMP[ 37°C ]
14:09:38: ACPIThermalZoneTHM__0 TMP[ 36°C ]
14:09:40: ACPIThermalZoneTHM__0 TMP[ 37°C ]
did you find your temps to be the same turbo?
I've had my M1530 for almost 11 months now and I noticed this discoloration on the palm rest but more importantly are the temps. The CPU is hitting 97 degrees Celsius and the GPU is hitting at 94 degrees Celsius. I first noticed this after several hours of video conversions then I ran ORTHOS to replicate the results. Should I ask for a technician to replace the mainboard or heatsinK? I've tried to raise the issue with the GPU running at this temp before but to no avail. However, this is the first time the CPU has hit such high temps.
[url]
I've got a Precision M4400 for which I did some DIY upgrading... Specifically, I put in a T9900 (3.06GHz, 35W TDP) processor and a 256Gb SSD. You can see the specs in my signature, actually.
The problem is that my temperatures seem to be going pretty high. Realtemp is saying that once I turn on the laptop, both CPU cores are at around 30-35 C. But after a very short while, this heats up to the mid-40's. And if I play Sims 3, let's say, the temperature can go up all the way to the high 70's. The GPU seems to stay at under 80 C, which I think should be fine .....
just installed fx2500 into my 9400.. everything working great..
What should I expext the temps to be running at ... Seems hot... I could keep my 7900gs under 60c by keeping my 18kgui program runnin fans on high while playing Cod4 or CS:s... now the gpu peaks out at 70-72c...
i was wondering what the temps you guys are getting on your 8700 sli setups running games like crysis and such. i'm running crysis for example at 1280x800 or something, cant remember off hand, everything set to medium. game for about and hour and a half and my temps only showed to reach around 62C. now this is using i8kfangui and offsetting the gpu temp by 8. i'm not using the program to handle the cooling, just monitor the temps. i guess i was just expecting the temps to be higher, not that its bad, i guess maybe the cooling and bios on this laptop just work better than on a 1705. seems that i hit 70C almost daily on that thing depending on the game i was running.
View 10 Replies View Related2 weeks ago I noticed that my m1530 got really hot to touch after a period (~1hour) of web browsing. So I called Dell and they replaced my heatsink and CPU fan
My current temps now are as follows:
ACPI : 41-58
GPC : 58-69
after 1/2 hour of COD4, my max temps were
ACPI: 71
GPU: 79
(Used CPUID Hardware monitor)
Also I am running Win7 Pro (x64) with a NC2000 notebook cooler
Recently I bought a Dell xps 13 1340 with p8600 and a 9500GE.
I viewed all the discussions about it and I know it has a heating problem, even thou I decided to buy it - once I saw it I just couldnt look at anything else...
Anyway Im running it with the A07 bios and all new drivers from dell's website.
When Im running it on heavy load like a game the 9400 GPU reaches to 86c.
The 9200 is around 75c. CPU is 74c max .....
ive got a xps m1530, with a t5550 processor.
While gaming im reaching 90°C.
Should i contact dell ? I bought this laptop on july 2008 without any extra warranties and i think that i have 1 year only of warranty that comes for free right?. The downside is that im in south america so it might take a while...
Can i contact them and a get a replace?
I put my 7950 gtx at 620//675 and I was testing with atitool .26 which I just downloaded and didn't change any settings. No artifacts for about 45 minutes, but atitool reports my temps in the system tray, and it got as high as 88 degrees. That seems pretty high, is that bad?
View 10 Replies View RelatedI always knew my comp ran hot, but not until I got HWMonitor today did I know how hot. I did a load test and CPU/GPU and ACPI temps went to 90. CPU and ACPI temps would drop to 65 ish after this, but the GPU stays kind of high in the 78-85 range. (Anyone know why this is happening?)
Also, when playing games, my temps are almost all at 87-90 all the time. I thought it might be my bios (A12), so I switched back to A09. This did not change anything.
Basically my question is, should I be calling dell support to take a look, and what do I tell them? I've never had computer warranty before. Or is there something else I can do to fix this? It's very hot to type on and sit on my lap.
A last question, these temps are being measured currently with the laptop on my desk, with the lid closed and an external monitor/keyboard/mouse plugged in. Is this causing increased temps? Should I be leaving the lid open?
I am noticing my second m6400 (Qx9300, Nvidia 3700, Vista64 Ultimate, A03 bios) is behaving differently than the first. The fan is pulsing on and off at idle (left hand fan) and it's driving me nuts.
I checked with speedfan and HWmonitor and notice that it idles 59-61 degrees celsius. I think this appears to be a lot hotter than other's temps I see here. (I saw someone mentioning they idle @ 39C)
It seems my idle GPU temps are pretty high. I just embarked on a mission to clean my fan out. I believe I was successful, but the whole thing was a little out of my comfort zone.
I'm now experiencing slightly cooler GPU temps i think (around 42-46 C at idle) but the GPU temp at idle is at a very steady 68 - 69 C, and the fan just keeps running all the time. Maybe I should have paid more attention to what the temps were beforehand, but it's too late for that.
Was wondering if this was something to be concerned about. Do I possibly have a bad contact between the thermal system and the GPU, and should I try and connect it more securely?
In short: My e1705 with a quadro 2500m is idling at temperatures at least 10 degrees celsius higher than it was before: 70 degrees with slow fans compared to ~60 with slow fans (I had fans kick in at 65 to bring it back to 60). There have been no hardware/software changes to the system.
So I read the guides about applying AS5 to your GPU and I thought I'd try to get better temps.
I cleaned off all the old compound from both the GPU and the heat spreader, and placed about a pea-sized piece on the GPU (see attachment). It wasn't the most perfect blob of AS5, but volume-wise I think it was pretty close, and ideally it would be smoothed out when I tightened the screws on the heat spreader.
I stuck to a "less is more approach" having heard that all I needed to do was fill the minor imperfections of the contact surfaces.
I just got my 1730 today and it's quite awesome.
However upon downloading hwmonitor, it seems my temps usually hover around mid 60s and go to 75s quite often making the fans come on. Is this normal?
And I live in the bay area pretty close to San Francisco, so the weather here is usually pretty cool
My dell xps m1710 temps at idle are
CPu 54C To 58C
GPU 54C To 58C
Is that okay?
The bottom of the computer is hot to the touch and the fans are blowing out hot air. I cleaned all fans and heat sink vents. also re applied all thermal paste on the cpu and gpu. Im concerned because my motherboard and gpu were just replaced yesterday for heat issues i believe. havent figured out if the heat was the cause or not. the temps were the same as there now with the new motherboard and gpu .....
I have a T5750 Processor and after playing L4D HWMonitor reports my max CPU temp as 81C. My idle temperatures are around 41-45 but my max temps are worrying me. My GPU temp also goes up to ~83 when gaming as well.
View 6 Replies View RelatedThis is at idle (although it is about 85 degrees F and humid at my house). But this is with a Antec cooling pad with my SXPS16 on an angle.
View 10 Replies View RelatedI just finished playing L4D and my recorded temps from HWMonitor were:
Max 81C for CPU
Max 90C for GPU
Should I be getting a notebook cooler?
They were in the high 80's low 90 yesterday, now there higher. I'm thinking of calling dell up, but the motherboard was just replaced (card reader problem). Should I ask for an upgrade to the 1640? or what I've had many problems with my M1530...
View 10 Replies View RelatedJust wanted to let you know of a tech experience with dell.
I got a M1530, long story short it was a replacement of a shocking Insp 6000.
Buncha hell to get it to work right (hardware issues galore).
Ended up working with Dell Liasons to get it fixed.
It was out of warranty (only had 90 days from every repair) and it began to overheat... 75-81 idle and 95 gaming... Called my liason, and he sent me a fan replacement. Temps dropped to 59-69 idle (fan kicks on at 69), and have yet to try gaming, gonna stop gaming on it.