I just ordered a docking station from ebay. Everything looks good and works fine except when I plug in my power cord to the dock it the computer says the adapter doesnt supply sufficient power to charge the laptop and requests that I plug in a 90W adapter.
The thing is I'm using the 130W adapter that came with my laptop. If it makes any difference my adapter is a PA-4E model and the dock is the E-Port Plus Replicator
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
Can anyone recommend a docking station for my Vostro 1220?
View 10 Replies View RelatedI'm looking for a laptop that has a port that allows it to connect to a docking station that will actually provide power to it.
I see a lot of them have docking stations available that connect via USB, but you still need to connect a separate power supply to the laptop. Ideally,
I'd love to have one that connects to the docking station by "sitting" in it... i.e., rather than plugging a cable into the "special" port on the laptop, the port is underneath or even just in the back of the laptop in such a way that it connects to the dock by simply resting the laptop up against it.
I got the PRX01 and my external hard drive (WD 320 GB) or my 8GB flash drives will not be read except on the one usb with power; is that normal or I got a lemon?
View 4 Replies View RelatedOr, more to the point, since I have only one VGA out from the laptop itself, would DVI be of any benefit at all?
Would dual DVI mean that each external monitor would run better?
If not, I'll just get the cheaper docking station. For my desktop, which the E4300 is replacing,
I have had one VGA and one DVI, and it is OK, but I like things the same if possible.
My laptop's fan WILL NOT turn off. Its spinning at blow dryer speeds all the time.
Initially I thought I had a lemon with some heat issues, so I returned it and DELL sent me a new one. I received it today and it has the same problem as the one before.
Apparently this laptop runs super hot when in the docking station-the reason being, I have no clue.
im worried that the internals are going to overheat cuz this fan is blowing out really hot air.
When I use it on the go or anywhere outside of the docking station-no fan problems.
Would hate to lose my docking station/external monitor...
Any suggestions for a cooling pad/docking station combo for the SXPS 16 that I could use in my office?
View 4 Replies View RelatedMy daughter's D610 slowly died during a 10 week car holiday trip in Northen Australia. From the description of how it gradually happened I assumed it could be bad power connection and eventually the battery failed.
Completely dismantled very carefully and tested the power connector, whilst not perfect I believe the solder joints were acceptable.
When power supplies PA10 or PA12 plugged in directly to the laptop no lights of any kind, with or without battery. Checked with other battery too, same result. The power supplies do deliver right voltage and good under load.
Have a docking station and partly to my surprise with the 95W or PA10 power supply the D610 works fine. With the PA12 or 65W power supply the docking station refuses to work telling you to shut down and replace the power supply.
Ran into a problem when I tried to test with the car power converter, which delievered enough power but was not recognised so docking station again refused. The second D610 I later had to hand allowed the car power to be used but under "protest", warning that performance might be poor. Eventually I got the PA10 which was accepted.
I have a second D610 which works fine on all 3 power supplies. Now having option for swopping parts, I would like to know what I can try to figure out what is causing the power interruption?
Can someone please recommend a docking station for the new CW?
View 4 Replies View RelatedI'm tired docking my laptop work/home/school.
So at least at home I need a good docking/cooling station, so I can easily connect 4-5 USB devices (keyboard, mouse, 2 external hard drives, and some other usb thing)
any recommendations?
I have a Dell d820, docking station, and monitor stand. I am running Vista ultimate.
My problems are two-fold:Hot docking does not work. If I take my laptop out while it's running and open the screen, it is blank, and it never comes back. Pulling it out while asleep results in similar issues. The only reliable way to dock and undock is to shut down completely
all I got a new E6410 and 2 docking stations around a month ago.The problem I have is that when the notebook is in my office docking station it is really really slow.I can watch while window contents are draw, switching messages inthugnerbird takes a couple of seconds.In the home dokcing station everything is fine.
View 15 Replies View RelatedI have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
View 2 Replies View RelatedWe have an unusual problem with a Dell Latitude E5520. It has been built with Windows 7 32bit SP1 and McAfee EndPoint Encryption, as we do with all of our laptops.
When the laptop is powered on and then docked, everything works fine. If you then give the laptop a restart whilst docked, it just doesn't! It shuts down and stays in some kind of power save mode. I have been through all of the Power options, including closing of the lid and turned off everything that could be causing this to happen, but still nothing.
If the power button is pressed whilst docked, the light comes on but that's it, no activity. Undock it, power up, close the lid and dock it again, all of the external screen, keyboard and mouse work as you would expect. I believe all of the drivers are up to date (it is a new laptop).
The docking station is an E-Port Plus DP/N:Â FFCV6 A00
We are using the sony prz1 docking station with our z590 laptops. we are having a lot of problems with the video signal and monitor resolution.
When we start the laptop (docked or undocked) the video signal and resolution has to be set manually everytime to use an external monitor (if you have already docked it and setup the dual monitor settings (clone) and just restart without undocking it the settings will stay the same).
after the resolution has been set for the external monitor and then we undock the laptop (start>undock). the resolution does not change back to the native laptop resolution. we have 4 machines setup like this. they all use different external monitors (samsung, viewsonic, hp, and sceptre).
I just purchased a VGN-Z690 Z series Sony notebook. The VGP-PRZ1 docking
station is not available at Sony or any major suppliers. Does anyone know where to get one new or refurbished?
Has anyone used a docking station with a Z11x? I'm looking at picking one up but want to make sure I do not have to reboot when I dock or undock.
To avoid any confusion:
I attend meetings off and on all day and would like to be able to use it at my desk, de-dock, use it in a conference room, go back to my desk and dock it and have it switch over the power, network and keyboard/video/mouse without rebooting, etc.
I am planning to buy one of the Sony Vaio NS series laptops. My question is in regards to a docking station. I really want to be able easily use my current desktop monitor and keyboard. Most of what I do is in Photo Shop and I have a big monitor that I can see lots of detail on my desktop. I contacted Sony and they said they don’t currently make a docking station for the NS series. It has been years since I’ve had a laptop and not sure of the options out there. It used to be I could just slide my HP laptop into this “station” that would automatically “plug” into my monitor, keyboard, etc.
View 10 Replies View Relatedi finally got the docking station for my Sr, have to say its not as good as i had hoped, the unit doesnt seem to click in, and in general its a fairly poor dock compared to the HP ones i have at work. That aside i have an issue.
1. When using the SR in the dock, i have to open the screen before the power button will start the unit? Seems strange, is there a setting for this or is this a poor design?
2. When the laptop is on and docked, my network connections both connect at the same time, eg i have wifi and lan both connected, this seems a bit strange, i would have thought that when im docked the unit wouldnt use wifi, and would use LAN instead. Again is there a setting for this as its not ideal currently.
Aside from that all seems well with the unit, seems stange to me that the dock provides gigabit network and the machine unit provides up to 100.
Does Sony make a docking station for the FW 590? I tried looking on their website but couldn't find anything.
View 4 Replies View RelatedHP is going to make a docking station for the HP mini 1000. I guess that port on the mini is an expansion port and not displayport. Looks cool. Guess it makes up for all the missing ports on the mini.
View 5 Replies View RelatedDell has sent me 3 E6400 computers and all of them fail when using the docking station and then the BUILT IN Verizon card. I have more than 50 hours with technical support.
Finally they put me with their top tier support. You will not believe their answer! I would never belive it if it wasn't in writing so I am going to copy it here for you .....
I'm running a D820 and I just installed Vista 64 Ultimate. I ran the entire install while disconnected from the dock and everything went smooth (SP1 and all patches afterwards).
After connecting the laptop to the dock I'm getting a very annoying latency with my mouse and keyboard. The mouse stops responding for as little as half a second, up to 4 or 5 seconds depending on what
I'm doing. While typing, the keyboard will also repeat the last key I touched when the issue occurs
My Latitude e7240 when docked onto the PR03X docking station, the power adapter that is plugged into the PR03X completely goes dead. The only way I can reset the power is by unplugging and replugging the AC adapter FROM THE WALL. Tried the spacer.  Tried double powering (1 adapter into the PR03X and another adapter into the e7240). Also tried plugging the laptop on first without power, and when powering up the laptop, it would boot up 10x slower than normal and sometimes hang. Also tried multiple other PR03X just to be sure the one i have is not faulty. The same problem is repeatable. The laptop has the latest BIOS.
It seems there is a power mismatch of some sort that would cause a) the adapter to fail, and then b) for the laptop to run extremely slow because of what?Is the problem caused by a faulty docking port on the e7240? I assume the PR03X is compatible to the e7240??
I have a Dell Latitude E6820 and have just connected a new Dell E-Port Plus II Docking station. Plugged in to the docking station are two monitors, one plugged into DVI Connector 1 and the other plugged into DVI Connector 2. The laptop is running Windows 7 64 bit.
Try as I might, I can not get the system to recognise the second monitor. I have tried the following to get this to work.
- Enabled Optimus (I think that is what it was called in the BIOS) - When I enabled this, neither of the monitors would work via the docking station
- Disabled Optimus - One monitor works
- Attempted to detect the other monitor via Control Panel > Display > Adjust Resolution (monitor not detected)
- Swapped monitors and cables in case it was a cable or monitor issue. All Cables and Monitors have been verified as working as expected.
- Attempted to connect one monitor via VGA cable. Only one monitor was detected
I just got my docking station for my Dell e5520. I got the one monitor to work with the VGA set up. I would love to get the two DVI monitors working instead of one monitor. I am not sure if this is possible or not. If it IS possible, how do I go about doing it?
View 1 Replies View RelatedBrand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) -Â it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
i have a number of Dell D600 latitude laptops in the organisation,all identicial. Strange thing is that one of them will not work with the docking station, any Docking station to think of it. this is the error message i get " Your power adapter does not supply enough power to run the attached docking station" press F1 to shut down
View 7 Replies View RelatedJust started using brand new Latitude E7240 and connected to E-port docking station. When booting an error pops up as below: The battery currently attached to the system will not supply enough power to dock for it to function. Please attach AC power to the dock for it to function normally
F1 - continue
F2- change setup options
The Laptop and the dock stations are brand new. This is only happening with the 7240's.