Dell Precision M4800 :: Docking Station - Monitor Connection
Nov 18, 2014
Brand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) - it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
View 1 Replies
ADVERTISEMENT
Jan 4, 2015
I have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
View 2 Replies
View Related
May 4, 2009
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
View 4 Replies
View Related
Dec 16, 2014
I was given a Dell Latitude E5440 and a docking station for my work. I brought in a wireless mouse and keyboard that I use for input (the reason for mentioning this will become evident later). The computer and dock were NIB and are ~ 2 months old. I have a Dell external monitor plugged into the dock via a DVI cable, and use it as a secondary monitor.
One thing I noticed early on with this setup is that the interconnection between the computer and dock is 'flimsy', at best. If I move the computer/dock on my desk by sliding it around, I lose connection and the external monitor image disappears.
My current issue is related but a bit different, I think. On 3 separate occasions in the past couple of weeks, the notebook screen has gone black without warning and the system has shut down. Once I was able to get the system back on, I was able to determine that the cause was that the battery had drained to 5%, and the system had shut down.
What I find odd is that this has happened while the unit is on the dock. What is even more odd to me is that, apparently, while the notebook has lost power connection to the dock, the video connection to the external monitor remained in tact. That is, in fact, the main reason I did not notice that the battery was draining. That, and the fact that I was never shown a warning that the battery was getting low and I should find an outlet. So, only the power connection pin or pins of the dock appear to be affected. This happened last night when I left for home. I had not touched the computer all day, since I have the wireless keyboard/mouse I mentioned above, but I did shut the lid to put the system into sleep mode. However, during the night, it apparently shut off because, the next morning, when I went to turn it on, I was greeted with a black screen stating the system had shut down unexpectedly and did I want to boot into Safe Mode. Upon booting, both PowerPoint and Word prompted me to 'recovery' my files that had been opened when the power was lost.
Questions: Why I would not receive a warning from the PC that the battery was getting low, so that I could either check the power connection or have time to gracefully shut down. That is much more preferable than the system behaving the same way it would if I had simply removed the battery when it was on.
View 1 Replies
View Related
Oct 31, 2014
I just got my new M6800 laptop- put it in the docking station and everything seems to work except for the USB's on the docking station.
I have had to plug my peripherals into my laptop. This is by design for the docking station. Why do I have a docking station? So that I can have an external keyboard and other peripherals permanently connected when I am in my office.
Went in device manager and searched for USB driver updates and mine are apparently up to date.
No trying a dell support chat window- let's see how long this takes....
View 8 Replies
View Related
Feb 24, 2013
I have a Dell Latitude E6820 and have just connected a new Dell E-Port Plus II Docking station. Plugged in to the docking station are two monitors, one plugged into DVI Connector 1 and the other plugged into DVI Connector 2. The laptop is running Windows 7 64 bit.
Try as I might, I can not get the system to recognise the second monitor. I have tried the following to get this to work.
- Enabled Optimus (I think that is what it was called in the BIOS) - When I enabled this, neither of the monitors would work via the docking station
- Disabled Optimus - One monitor works
- Attempted to detect the other monitor via Control Panel > Display > Adjust Resolution (monitor not detected)
- Swapped monitors and cables in case it was a cable or monitor issue. All Cables and Monitors have been verified as working as expected.
- Attempted to connect one monitor via VGA cable. Only one monitor was detected
View 2 Replies
View Related
Dec 18, 2013
I just received my new t430 and having issue with dual monitors. I am using the Intel HD 4000. I have it connected to a ThinkPad Port Replicator Series 3 (Type 4336). The docking station only support VGA connection. My new t430 only has a VGA connection on the side.
I have 2 monitors. One is connected to the VGA on the docking station. The other is connected to the VGA on the t430 itself.
While the machine is docked, Monitor #1 that is plugged into the docking station works, while Monitor #2 that is plugged into the t430 does not.
While undocked. Monitor #1 does work (obviously because undocked), but then Monitor #2 does work.
So I know both monitors are working and configured for VGA input. My questions is, why can't both work at the same time? While undocked, I can use laptop screen and Monitor #2 as a dual monitor. So I don't believe there is something wrong with the Operating System (Windows 7).
I used to be able to do this on my t420. With one monitor using VGA, and my other monitor using a DisplayPort. But looks like this model my company purchased doesn't support a DisplayPort (at least don't have the connection.)
View 3 Replies
View Related
Apr 7, 2014
I have a Lenovo L440 laptop with a think pad pro dock. The HDD is encrypted with TrueCrypt and needs a password before windows will boot. The laptop will not display out to the monitor attached to the dock before windows loads. I have changed the bios setting Config > Display > Boot Display Device, as well as all the other display options, but it does not make a difference. I have tried with a VGA cable and a DVI cable and neither works. I have tried with 2 different L440s and 2 docking stations with the same problem occuring on both. I have successfully used a Lenovo L540 laptop with the same model of docking station. I have also updated to the most current bios version.
I'm wondering if I'm missing something or if the L440 model simply does not support this function?
View 4 Replies
View Related
Nov 15, 2014
I bought an RFB Dell Precision M4800 .... When I used my laptop in the ark. My keyboard hadn't been enlighten.
I tried follow some suggestion as: install Dell Feature Enhancement Pack v2.2.1
But I didn't find "Dell Keyboard Backlight Settings" on control panel as guidance.
View 2 Replies
View Related
Jan 7, 2015
i Bought a dell precision m4800 it came it windows 8 i updated it and now my wifi switch is not working it does'nt turmn off and now i can't turn the bluetooth on as well, it says that you need to turn on the wireless hardware but it is already on
View 1 Replies
View Related
Nov 30, 2013
Having a strange issue with the Touchpad on my Dell Precision M4800. When I disable it using the Dell software or using the Fn+F5 hotkey, it has a tendency to come back on after a random interval of time. I want it to stay turned off permanently, as I prefer to use the Pointstick exclusively.When using the Fn hotkey, I get a notification onscreen as well as a popup in the system tray saying "Touchpad notification: Your touchpad has been disabled." If I manually disable it through the Dell Pointing Devices software, I get the same effect, but without the notification. In either case, this works great... for awhile.But then the Touchpad inevitably turns back on. I often don't notice until suddenly my mouse cursor is behaving erratically, at which point I try to swipe my finger on the touchpad and sure enough, it's become enabled again.
However after some further experimenting it turns out the "random" aspect of this is not totally random and I can reproduce the issue quite reliably by furiously scanning my finger back and forth across the Touchpad for a few seconds. Inevitably, the touchpad will turn back on, and I will get the notification "Your touchpad has been enabled." No buttons or hotkeys are pressed, all I have to do is move my finger on the touchpad surface rapidly and within seconds of starting to do that, it will re-enable itself. Again, there is also a notification that it has been re-enabled when this happens, so the software is detecting my finger movements somehow, perhaps I am accidentally performing some "magic gesture" that compels it to re-enable the touchpad.
If I don't intentionally try to cause this, it still turns on eventually, but can take a long time, half an hour or more before it becomes enabled again. I assume it's the activity of my palms resting on it that will accidentally turn it on again in the same way as swiping my finger intentionally across the disabled touchpad. It makes no difference whether the Dell Pointing Device software is open or closed and this will happen when any application is open.
All I want is for the touchpad to be truly disabled permanently and not accidentally turn on in the middle of my work. But at the same time I'd prefer to leave the pointing stick enabled, so I can't simply remove the driver. So far I've been using an external mouse and disabling all internal pointing devices, which works ok, but like I said I am fond of the pointing stick, I'd prefer to be able to leave it on with JUST the touchpad disabled.
System specs: Dell Precision M4800 with qHD screen
CPU: Core i7 4800MQ @ 2.70Ghz
Graphics: nVidia Quadro K2100M
OS: Factory-installed Windows 7 Pro 64-bit
Dell Pointing Devices software version v.8.1200.101.134
View 12 Replies
View Related
Dec 16, 2013
This laptop isn't even one month old.. this is sincerely frustrating as i have alot of important work saved on here...
-When I plug in the charger.. the battery light turns on for a second then the battery light turns back off.
-When I try to turn on the laptop with the charger plugged in.. nothing happens at all. When I try to turn on the laptop with just the battery without being plugged in.. the power button will light up for a second then go back off.
I've tried: taking out the battery and holding down the power light for 1 minute.. waited 30 seconds tried turning it on with the power chord with no prevail. holding Fn and turning it on and nothing
Some signs I've been seeing: only bad signs i've seen was before it just didn't boot anymore.. maybe twice out of the 6 last time i've booted.. as soon as i typed my password to get into windows it would just shut off. i'd jus reboot and it worked fine. when it stopped turning on.. after messing with plugging it in or not (i didn't know if the battery was dead) i was able to make it past the windows sign on screen.. was going to email myself all my work before it suddenly shut off on me again. the battery had maybe 1/3rd life before it died
I might have interchanged battery chargers with another older dell model laptop.. but i think only a few times at most.. it mostly sits at work on a docking station at work. i have a feeling i never did though. from what i've read it seems like the battery chargers are all compatible as long as it's dell.
View 3 Replies
View Related
Jan 2, 2015
I recently ordered Mushkin Enhanced Blackline 16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model 997067 - Newegg.com to upgrade ram on DELL M4800. When installed it doesn't let the Laptop to boot. Newegg says this is compatible but the product doesn't.I'm sure I installed it properly. By any chance,did I receive a defective product ? or is the product incompatible unlike Newegg's Memory finder suggestion ? Newegg charges $15 restocking fee, so I would like to make sure i'm not doing something wrong before before returning it.
View 5 Replies
View Related
Nov 19, 2013
I'm a proud user of an M4800, but the constant fan noise bothers me a lot. I ordered it wit win7 but almost directly switched to win 8.1.
What I already discovered: In the event viewer I experienced a lot of MSI error events (every 11 seconds) .
Event filter with query "SELECT * FROM __InstanceOperationEvent WITHIN 10 WHERE (TargetInstance ISA 'Msvm_ExternalEthernetPort') OR (TargetInstance ISA 'Msvm_VmLANEndpoint') OR (TargetInstance ISA 'Msvm_SyntheticEthernetPort') OR (TargetInstance ISA 'Msvm_ComputerSystem') OR (TargetInstance ISA 'Msvm_VLANEndpointSettingData')" could not be reactivated in namespace "//./root/virtualization" because of error 0x80041010.
Events cannot be delivered through this filter until the problem is corrected. If I stop the Intel(R) PROSet Monitoring Service these events stop, but I wonder if the performance of network devices is not affected negatively:
The Intel(R) PROSet Monitoring Service actively monitors changes to the system and updates affected network devices to keep them running in optimal condition. Stopping this service may negatively affect the performance of the network devices on the system.
Nevertheless after this action CPU usage has dropped, but still too much fan noise while the system does nothing ;o(
I contacted support and they adviced me to reinstall with win7, but that is no option for me for the moment.
My power options are set to 'Quiet (Reduced Fan Levels)'
In the BIOS vA03 I could not find an option to lower settings there. and all latest drivers are downloaded and installed.
View 15 Replies
View Related
Dec 31, 2014
I have a Precision M4800 that has its USB ports stop working in two cases so far. First, if I use the card reader at all, it works to access files, but then when I try to eject the card, it shows neither an error nor the "safe to remove" message. the card stays in the list of drives even after it's unplugged. If another USB drive is plugged in after this, it isn't recognized.
The second case is after using an external USB 3.0 drive for a while, it can stop working. The drive shows up in the list of drives, but all the directories appear empty. Unplugging doesn't remove the drive, and new drives aren't recognized. Once this happens, shutting down the machine crashes after a few minutes with DRIVER_POWER_STATE_FAILURE in either USBSTOR.sys or O2FJ2w7x64.sys. Could this be a hardware problem? It seems like the USB controller is locking up and the other drivers are getting blamed.
View 3 Replies
View Related
Sep 15, 2014
I recently re installed my Dell Precision M4800 laptop. In the device manager there is a driver not installed " Broadcom USH" I already searched for it, and there is one : Dell ControlPoint Security Device Driver Pack, but this device is not (yet) supported. Is there a way to fix this? I did not get any recovery cd with my pc, only a few drivers, not this one.
View 3 Replies
View Related
Nov 18, 2014
I own a Dell Precision M4800 Workstation running Windows 8.1 64-bit and the problem is that when I type text, no matter where (address bar, Office, iTunes, etc), and go to move my cursor immediately after, it takes about 3-4 seconds of me swiping on the touchpad to get it to move.
View 2 Replies
View Related
May 3, 2014
I have a Dell Precision M4800 laptop with windows 7 64bit. The backlight keyboard goes off if there is no activity for 10 seconds. I'm wondering if there is a way to change this so that it stays on even if there is no typing? (I have no option to change this in the Windows Mobility Center).
View 4 Replies
View Related
Apr 21, 2010
Can anyone recommend a docking station for my Vostro 1220?
View 10 Replies
View Related
Aug 25, 2009
I'm looking for a laptop that has a port that allows it to connect to a docking station that will actually provide power to it.
I see a lot of them have docking stations available that connect via USB, but you still need to connect a separate power supply to the laptop. Ideally,
I'd love to have one that connects to the docking station by "sitting" in it... i.e., rather than plugging a cable into the "special" port on the laptop, the port is underneath or even just in the back of the laptop in such a way that it connects to the dock by simply resting the laptop up against it.
View 10 Replies
View Related
Jan 22, 2009
I got the PRX01 and my external hard drive (WD 320 GB) or my 8GB flash drives will not be read except on the one usb with power; is that normal or I got a lemon?
View 4 Replies
View Related
Apr 30, 2009
I just ordered a docking station from ebay. Everything looks good and works fine except when I plug in my power cord to the dock it the computer says the adapter doesnt supply sufficient power to charge the laptop and requests that I plug in a 90W adapter.
The thing is I'm using the 130W adapter that came with my laptop. If it makes any difference my adapter is a PA-4E model and the dock is the E-Port Plus Replicator
View 10 Replies
View Related
Sep 19, 2014
I recently updated my Dell m4800 to BIOS A8 with Windows 7 64. I had been using a collection of older power adapters from my previous Dell m4400 without any issues. After the update, wow. A huge performance hit if I do not have the 19.5 volt and 9.23 amp adapter connected.
The m4400 power adapter is 19.5 volt and 6.7 amp. Pretty close right? Not any more.
I do have it connected to a Dell docking station almost all the time. Just checked. They are both 6.7 amp.
What changed in BIOS A8 and what the deal is with the performance? Looks like I need to request a new docking station, but I'm not sure IT will believe my story.
View 3 Replies
View Related
Jan 14, 2009
Or, more to the point, since I have only one VGA out from the laptop itself, would DVI be of any benefit at all?
Would dual DVI mean that each external monitor would run better?
If not, I'll just get the cheaper docking station. For my desktop, which the E4300 is replacing,
I have had one VGA and one DVI, and it is OK, but I like things the same if possible.
View 6 Replies
View Related
Oct 15, 2008
My laptop's fan WILL NOT turn off. Its spinning at blow dryer speeds all the time.
Initially I thought I had a lemon with some heat issues, so I returned it and DELL sent me a new one. I received it today and it has the same problem as the one before.
Apparently this laptop runs super hot when in the docking station-the reason being, I have no clue.
im worried that the internals are going to overheat cuz this fan is blowing out really hot air.
When I use it on the go or anywhere outside of the docking station-no fan problems.
Would hate to lose my docking station/external monitor...
View 10 Replies
View Related
May 4, 2009
Any suggestions for a cooling pad/docking station combo for the SXPS 16 that I could use in my office?
View 4 Replies
View Related
Nov 3, 2009
My daughter's D610 slowly died during a 10 week car holiday trip in Northen Australia. From the description of how it gradually happened I assumed it could be bad power connection and eventually the battery failed.
Completely dismantled very carefully and tested the power connector, whilst not perfect I believe the solder joints were acceptable.
When power supplies PA10 or PA12 plugged in directly to the laptop no lights of any kind, with or without battery. Checked with other battery too, same result. The power supplies do deliver right voltage and good under load.
Have a docking station and partly to my surprise with the 95W or PA10 power supply the D610 works fine. With the PA12 or 65W power supply the docking station refuses to work telling you to shut down and replace the power supply.
Ran into a problem when I tried to test with the car power converter, which delievered enough power but was not recognised so docking station again refused. The second D610 I later had to hand allowed the car power to be used but under "protest", warning that performance might be poor. Eventually I got the PA10 which was accepted.
I have a second D610 which works fine on all 3 power supplies. Now having option for swopping parts, I would like to know what I can try to figure out what is causing the power interruption?
View 9 Replies
View Related
Jan 30, 2010
Can someone please recommend a docking station for the new CW?
View 4 Replies
View Related
Mar 5, 2010
I'm tired docking my laptop work/home/school.
So at least at home I need a good docking/cooling station, so I can easily connect 4-5 USB devices (keyboard, mouse, 2 external hard drives, and some other usb thing)
any recommendations?
View 5 Replies
View Related
Mar 31, 2009
I have a Dell d820, docking station, and monitor stand. I am running Vista ultimate.
My problems are two-fold:Hot docking does not work. If I take my laptop out while it's running and open the screen, it is blank, and it never comes back. Pulling it out while asleep results in similar issues. The only reliable way to dock and undock is to shut down completely
View 3 Replies
View Related
