Lenovo ThinkPad L R/SL :: L440 - Not Display Docking Station Of Monitor During Bios
Apr 7, 2014
I have a Lenovo L440 laptop with a think pad pro dock. The HDD is encrypted with TrueCrypt and needs a password before windows will boot. The laptop will not display out to the monitor attached to the dock before windows loads. I have changed the bios setting Config > Display > Boot Display Device, as well as all the other display options, but it does not make a difference. I have tried with a VGA cable and a DVI cable and neither works. I have tried with 2 different L440s and 2 docking stations with the same problem occuring on both. I have successfully used a Lenovo L540 laptop with the same model of docking station. I have also updated to the most current bios version.
I'm wondering if I'm missing something or if the L440 model simply does not support this function?
View 4 Replies
ADVERTISEMENT
May 4, 2009
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
View 4 Replies
View Related
Sep 29, 2010
There are a few configurations of L440 laptops with Nvidia GT 720M grafic cards and Optimus (e. g. 20ASS01G00). Is it possible to change the used graphic system in the BIOS (Intel only/NVidia only/Optimus)? And which card is hardwired to the external ports (VGA, mDP)?
(Do this differ from the T440p or the Edge Series, E540?)
View 1 Replies
View Related
Jun 19, 2012
I have a very annoying problem with my W530. When i'm using it in the docking station (last years version without usb 3.0) erverything works fine, but there are a few very loud sound cracks playing through my external speaker system. Without the dock with the buildin speakers no problem. My external speaker plugged in the headphone jack no prob either.
These loud sound cracks appear when a few seconds no sound is played and then when a new sound starts to play. So i guess it has something to do with some power saving mechanism in the realtek sound chipset. When a continues sound is played like a song no sound cracks are happening.
View 9 Replies
View Related
Aug 7, 2012
I have a T520 thinkpad with a docking station. I can get my headphones to work fine out of the laptop, but I would like to leave my headphones plugged into the headphone jack on the dock itself. The computer doesn't seem to recognize this jack is even there. My only sound options are the laptop speakers and the audio jack on the right side of the laptop.
How to enable the audio jack on the back of the dock?
View 6 Replies
View Related
Feb 19, 2013
I have a ThinkPad X240 laptop with Windows 8.1 Enterprise x64 installed. Sound plays just fine from the laptop's speakers, and when I plug external speakers into the laptop's 3.5mm audio port they work just fine too. when the laptop is docked in my Ultra Dock 90W docking station and the external speakers cable is plugged into the dock's audio port, no sound is heard. If I'm playing music through the laptop's speakers, as soon as I plug a cable into the dock's audio port no sound is heard. I can still use the laptop's audio port to connect external speakers, but that defeats the object of having an audio port on the Ultra Dock.
The Ultra Dock has (I believe) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > Sound, video and game controllers > Realtek High Definition Audio > Driver version is 6.0.1.7188 which is the latest available from Lenovo Support downloads. What do I need to do to get the Ultra Dock's audio port working? I mistakenly posted this message on the "X Series tablet ThinkPad Laptops" board.
View 3 Replies
View Related
Sep 8, 2014
I am running a IBM Thinkpad W540 with a Lenovo Ultra Dock Docking Station 170 (Model 40A20170US). I have 3 Asus 23.6" LED HD Monitors (Model VN247HP). These monitors have a standard VGA connection and 2 HDMI ports, By default you are provided a VGA cable and a HDMI-DVI cable. When I plug these monitors into the Ultra Dock no signal is found(including the VGA).
When I plug into the direct VGA port on the laptop, the monitor gets signal. If I use a Mini-DP connection with a Mini-DP-DVI adapter I get signal just fine. If I plug my this monitor into my desktop under HDMI and DVI connections it works just fine.
I have gone into the bios and confirmed that under display the "Video Mode on Dock" is set to Advanced(I tried standard and it did not work any better). I have the latest video drivers for the Intel HD graphics driver (10.18.10.3412) and the NVIDIA Quadro K1100M (9.18.13.4052). The USB ports work just fine, as does the power cable for the docking station. I tried applying the latest firmware update but the program runs and nothing happens. I checked for any other drivers that might have resolve the issue but have not had any luck.
View 3 Replies
View Related
Feb 24, 2013
I have a Dell Latitude E6820 and have just connected a new Dell E-Port Plus II Docking station. Plugged in to the docking station are two monitors, one plugged into DVI Connector 1 and the other plugged into DVI Connector 2. The laptop is running Windows 7 64 bit.
Try as I might, I can not get the system to recognise the second monitor. I have tried the following to get this to work.
- Enabled Optimus (I think that is what it was called in the BIOS) - When I enabled this, neither of the monitors would work via the docking station
- Disabled Optimus - One monitor works
- Attempted to detect the other monitor via Control Panel > Display > Adjust Resolution (monitor not detected)
- Swapped monitors and cables in case it was a cable or monitor issue. All Cables and Monitors have been verified as working as expected.
- Attempted to connect one monitor via VGA cable. Only one monitor was detected
View 2 Replies
View Related
Nov 18, 2014
Brand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) - it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
View 1 Replies
View Related
May 14, 2014
I should like to connect my old hp2710p to TV via HDMI. So I connect the displayport of the docking with an hdmi adpater but it doesn't work.
If I connect my hp2760p, everything goes.
The 2710p has w7 32bit, last version o BIOS and drivers.
View 2 Replies
View Related
Jan 13, 2015
Can the EliteBook 8570w on a 90w docking station support 3 monitors?
View 3 Replies
View Related
Nov 5, 2014
I have a Thinkpad L440 with 4GB of RAM.
1. Is it OK to add 8GB (so I will have 12GB in total) or it would be better to add 4GB in order to have two similar SODIMMs?
2. Are there any known incompatibilities for specific brands? I found two SODIMMs from Kingston (part numbers KVR16S11/8 and KVR16LS11/8) and one from Crucial (part number CT102464BF160B). All are clocked at 1600MHz.
View 5 Replies
View Related
May 12, 2014
I have the Lenovo L440 (20AT002YGE) with the integrated Intel Graphics.
I have turned off the automatic dimming of the screen brightnes in the windows energy settings and also turned off the energy saver settings in the Intel driver but the screen keeps beeing dimmed when the background is black or dark. This is very annoying when you work outdoor and the sun keeps shining on your display and than it dimms the brightness.
View 1 Replies
View Related
Sep 9, 2014
I have L440 with 64-bit Win7. Earlier experienced major WiFi connection problems, which were fixed with BIOS and WiFi card driver update.
Briefly after that Wireless Radios Master Control no longer lists Mobile Broadband, it only shows 802.11 Wireless/Wimax and Bluetooth.
Windows Network Connections lists "Mobile Broadband Connection" as "Not connected, N5321 gw Mobile Broadband Driver. Diagnosing this connection suggests to "Turn on mobile broadband capability", which I cannot do as it is not listed in the Wireless Radios Master Control.
View 9 Replies
View Related
Oct 29, 2014
What port replicator/docking station with support of atleast 2 monitors works with the new Yoga 3 Pro?
View 3 Replies
View Related
Dec 30, 2013
I recently picked up a T431s from the outlet. Nice ultrabook. Lighter than my T520 and T410. I have been using the 4337 and 4338 dock solutions for both of those units. I had done research before purchasing the T431s and was assured by Lenovo that the unit would work in both a 4337 and 4338 with an adapter (part number 04x0856 - Lenovo CS09 Dock Adapter). The part is shown here: CS09 Part. The T431s did not ship with the Lenovo CS09 Dock Adapter and I have been looking everywhere to locate one so that I can use it in either the 4337 or 4338 dock. Is there another part number that I am missing?
View 3 Replies
View Related
Nov 24, 2014
Customer has three L440 with Docking station PRO and Samsung 22" S22C45 on DVI
* W7 64BIT Sp1 Lenovo version not VL
* Latest BIOS
* Latest GFX Driver
* All Windows WSUS Updates (Standard Image from lenovo with all Hotfixes)
* Power Options set to Performance (lenovo Power manager deinstalled)
* Office 2010 SP2, PDF24, APPV client 4.6+
* Dameware 6.X Agent
problem:
Laptop is in docking station with external 22" Samsung DVI and working in Winword, IE or others. Suddenly screen from Samsung turns black (laptop TFT from people who use dual stays on). After 1-10 seconds the samsung screen comes back. We fiest thought this was some RDP issue with other users connecting to the device. (Not the case)
NO > BIOS and GFX is latest and MADE it worser with updating to the latest (happens more often).
NO > MHz change from 59/60 or slighty modify did not solve
NO > It's not a screensaver problem
NO > All three Samsung are from diffrent shippments and even Distributors
NO > All three L440 are from different time periods 2-3 Months split
View 1 Replies
View Related
Sep 1, 2014
I have a T540p laptop with Windows 7 installed on it, and when I insert it in the docking Station (Ultra Dock 90w) the USB ports don't work.
I tried with another laptop setup with Windows 8.1 and everything works fine. I also tried with another docking stsation, I have the same issue. I suspect something wrong with Windows 7.
All drivers are properly installed as the computer is new. I also performed the docking Firmware update from this page [URL] ... but this didn't work.
View 9 Replies
View Related
Oct 14, 2014
Trying to find a way/hotkey to turn off the built-in display whilst I'm connected to another external monitor with the Thinkpad S1 Yoga model. How to do it?
I could even remap any of the default hotkeys, how to do that as well, as the defaults are not too useful for me...
View 8 Replies
View Related
Jan 3, 2015
I bought Lenovo L440 few days ago.
I have problem with wifi connection. Wifi works perfect with other devices: phones, tablets, laptops. When I connect to wifi with L440, wifi works 5-30 min. and then crash. L440 kills wifi network. All devices can't connect to wifi until I restart router.
I have read about this problem, but in task manager I can't find "discovery.exe" or LenovoEMC Storage Connector in Contral Panel.
View 4 Replies
View Related
Mar 1, 2014
When I pause playback of an .mp3, there's permanent white noise coming from the internal speakers.
Stopping the playback stops the white noise after approximately 4 seconds. I never had this issue with any laptop / soundcard. Can this be fixed?
I have the latest BIOS and drivers installed. Headphones are fine (no white noise).
Maybe the inbuilt L440 soundcard has a problem. I had to return my first L440 because there was a loud plop when starting playback and the left speaker was way quieter than the right one.
In the German part of this forum people are reporting problems realted to the internal speaker (cracking sound, white noise).
View 4 Replies
View Related
Dec 18, 2013
I just received my new t430 and having issue with dual monitors. I am using the Intel HD 4000. I have it connected to a ThinkPad Port Replicator Series 3 (Type 4336). The docking station only support VGA connection. My new t430 only has a VGA connection on the side.
I have 2 monitors. One is connected to the VGA on the docking station. The other is connected to the VGA on the t430 itself.
While the machine is docked, Monitor #1 that is plugged into the docking station works, while Monitor #2 that is plugged into the t430 does not.
While undocked. Monitor #1 does work (obviously because undocked), but then Monitor #2 does work.
So I know both monitors are working and configured for VGA input. My questions is, why can't both work at the same time? While undocked, I can use laptop screen and Monitor #2 as a dual monitor. So I don't believe there is something wrong with the Operating System (Windows 7).
I used to be able to do this on my t420. With one monitor using VGA, and my other monitor using a DisplayPort. But looks like this model my company purchased doesn't support a DisplayPort (at least don't have the connection.)
View 3 Replies
View Related
Nov 7, 2013
When I connect my external monitor (ASUS PA248) to my W520, the audio disappears. When I disconnect it, the audio returns. This seems a bizarre link between audio and video, but there it is. Note that the PA248 does NOT have built-in speakers.
View 3 Replies
View Related
May 18, 2014
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies
View Related
Apr 21, 2010
Can anyone recommend a docking station for my Vostro 1220?
View 10 Replies
View Related
Aug 25, 2009
I'm looking for a laptop that has a port that allows it to connect to a docking station that will actually provide power to it.
I see a lot of them have docking stations available that connect via USB, but you still need to connect a separate power supply to the laptop. Ideally,
I'd love to have one that connects to the docking station by "sitting" in it... i.e., rather than plugging a cable into the "special" port on the laptop, the port is underneath or even just in the back of the laptop in such a way that it connects to the dock by simply resting the laptop up against it.
View 10 Replies
View Related
Jan 30, 2010
Can someone please recommend a docking station for the new CW?
View 4 Replies
View Related
Jan 22, 2009
I got the PRX01 and my external hard drive (WD 320 GB) or my 8GB flash drives will not be read except on the one usb with power; is that normal or I got a lemon?
View 4 Replies
View Related
Apr 30, 2009
I just ordered a docking station from ebay. Everything looks good and works fine except when I plug in my power cord to the dock it the computer says the adapter doesnt supply sufficient power to charge the laptop and requests that I plug in a 90W adapter.
The thing is I'm using the 130W adapter that came with my laptop. If it makes any difference my adapter is a PA-4E model and the dock is the E-Port Plus Replicator
View 10 Replies
View Related
Feb 18, 2009
We are using the sony prz1 docking station with our z590 laptops. we are having a lot of problems with the video signal and monitor resolution.
When we start the laptop (docked or undocked) the video signal and resolution has to be set manually everytime to use an external monitor (if you have already docked it and setup the dual monitor settings (clone) and just restart without undocking it the settings will stay the same).
after the resolution has been set for the external monitor and then we undock the laptop (start>undock). the resolution does not change back to the native laptop resolution. we have 4 machines setup like this. they all use different external monitors (samsung, viewsonic, hp, and sceptre).
View 4 Replies
View Related
