I own a Dell Precision M4800 Workstation running Windows 8.1 64-bit and the problem is that when I type text, no matter where (address bar, Office, iTunes, etc), and go to move my cursor immediately after, it takes about 3-4 seconds of me swiping on the touchpad to get it to move.
View 2 RepliesPRECISION T3600 restarts automatically while using the workstation. We replaced mother board, graphic card and hard drive but still issue is same.
View 1 Replies View RelatedI have an M6300 Mobile Workstation that does not turn on. The green "On" indicator goes on and then the Cap Lock indicator just blinks. The screen never turns on and I never see the Dell opening splash screen when starting the computer. I have to hold the power button for over 20 seconds to turn the unit off.
What is going on with this computer especially what the blinking Cap Lock indicator means? Can I guess that it could be a hard drive problem because it tries to start, but never does and hangs with a blank screen, a Blinking Caps Lock indicator and the "On" indicator on steady?
I bought an RFB Dell Precision M4800 .... When I used my laptop in the ark. My keyboard hadn't been enlighten.
I tried follow some suggestion as: install Dell Feature Enhancement Pack v2.2.1
But I didn't find "Dell Keyboard Backlight Settings" on control panel as guidance.
I cannot install any OS on my M6500 wether from USB or DVD.
I keep getting the error "Required CD/DVD drive device driver is missing" whenever i select to install windows.
I have my 2x 250gb drives in Raid 0 but i keep getting this error all the time, any kink to a driver ?
i Bought a dell precision m4800 it came it windows 8 i updated it and now my wifi switch is not working it does'nt turmn off and now i can't turn the bluetooth on as well, it says that you need to turn on the wireless hardware but it is already on
View 1 Replies View RelatedI have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
View 2 Replies View RelatedHaving a strange issue with the Touchpad on my Dell Precision M4800. When I disable it using the Dell software or using the Fn+F5 hotkey, it has a tendency to come back on after a random interval of time. I want it to stay turned off permanently, as I prefer to use the Pointstick exclusively.When using the Fn hotkey, I get a notification onscreen as well as a popup in the system tray saying "Touchpad notification: Your touchpad has been disabled." If I manually disable it through the Dell Pointing Devices software, I get the same effect, but without the notification. In either case, this works great... for awhile.But then the Touchpad inevitably turns back on. I often don't notice until suddenly my mouse cursor is behaving erratically, at which point I try to swipe my finger on the touchpad and sure enough, it's become enabled again.
However after some further experimenting it turns out the "random" aspect of this is not totally random and I can reproduce the issue quite reliably by furiously scanning my finger back and forth across the Touchpad for a few seconds. Inevitably, the touchpad will turn back on, and I will get the notification "Your touchpad has been enabled." No buttons or hotkeys are pressed, all I have to do is move my finger on the touchpad surface rapidly and within seconds of starting to do that, it will re-enable itself. Again, there is also a notification that it has been re-enabled when this happens, so the software is detecting my finger movements somehow, perhaps I am accidentally performing some "magic gesture" that compels it to re-enable the touchpad.
If I don't intentionally try to cause this, it still turns on eventually, but can take a long time, half an hour or more before it becomes enabled again. I assume it's the activity of my palms resting on it that will accidentally turn it on again in the same way as swiping my finger intentionally across the disabled touchpad. It makes no difference whether the Dell Pointing Device software is open or closed and this will happen when any application is open.
All I want is for the touchpad to be truly disabled permanently and not accidentally turn on in the middle of my work. But at the same time I'd prefer to leave the pointing stick enabled, so I can't simply remove the driver. So far I've been using an external mouse and disabling all internal pointing devices, which works ok, but like I said I am fond of the pointing stick, I'd prefer to be able to leave it on with JUST the touchpad disabled.
System specs: Dell Precision M4800 with qHD screen
CPU: Core i7 4800MQ @ 2.70Ghz
Graphics: nVidia Quadro K2100M
OS: Factory-installed Windows 7 Pro 64-bit
Dell Pointing Devices software version v.8.1200.101.134
This laptop isn't even one month old.. this is sincerely frustrating as i have alot of important work saved on here...
-When I plug in the charger.. the battery light turns on for a second then the battery light turns back off.
-When I try to turn on the laptop with the charger plugged in.. nothing happens at all. When I try to turn on the laptop with just the battery without being plugged in.. the power button will light up for a second then go back off.
I've tried: taking out the battery and holding down the power light for 1 minute.. waited 30 seconds tried turning it on with the power chord with no prevail. holding Fn and turning it on and nothing
Some signs I've been seeing: only bad signs i've seen was before it just didn't boot anymore.. maybe twice out of the 6 last time i've booted.. as soon as i typed my password to get into windows it would just shut off. i'd jus reboot and it worked fine. when it stopped turning on.. after messing with plugging it in or not (i didn't know if the battery was dead) i was able to make it past the windows sign on screen.. was going to email myself all my work before it suddenly shut off on me again. the battery had maybe 1/3rd life before it died
I might have interchanged battery chargers with another older dell model laptop.. but i think only a few times at most.. it mostly sits at work on a docking station at work. i have a feeling i never did though. from what i've read it seems like the battery chargers are all compatible as long as it's dell.
I recently ordered Mushkin Enhanced Blackline 16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model 997067 - Newegg.com to upgrade ram on DELL M4800. When installed it doesn't let the Laptop to boot. Newegg says this is compatible but the product doesn't.I'm sure I installed it properly. By any chance,did I receive a defective product ? or is the product incompatible unlike Newegg's Memory finder suggestion ? Newegg charges $15 restocking fee, so I would like to make sure i'm not doing something wrong before before returning it.
View 5 Replies View RelatedI'm a proud user of an M4800, but the constant fan noise bothers me a lot. I ordered it wit win7 but almost directly switched to win 8.1.
What I already discovered: In the event viewer I experienced a lot of MSI error events (every 11 seconds) .
Event filter with query "SELECT * FROM __InstanceOperationEvent WITHIN 10 WHERE (TargetInstance ISA 'Msvm_ExternalEthernetPort') OR (TargetInstance ISA 'Msvm_VmLANEndpoint') OR (TargetInstance ISA 'Msvm_SyntheticEthernetPort') OR (TargetInstance ISA 'Msvm_ComputerSystem') OR (TargetInstance ISA 'Msvm_VLANEndpointSettingData')" could not be reactivated in namespace "//./root/virtualization" because of error 0x80041010.
Events cannot be delivered through this filter until the problem is corrected. If I stop the Intel(R) PROSet Monitoring Service these events stop, but I wonder if the performance of network devices is not affected negatively:
The Intel(R) PROSet Monitoring Service actively monitors changes to the system and updates affected network devices to keep them running in optimal condition. Stopping this service may negatively affect the performance of the network devices on the system.
Nevertheless after this action CPU usage has dropped, but still too much fan noise while the system does nothing ;o(
I contacted support and they adviced me to reinstall with win7, but that is no option for me for the moment.
My power options are set to 'Quiet (Reduced Fan Levels)'
In the BIOS vA03 I could not find an option to lower settings there. and all latest drivers are downloaded and installed.
I have a Precision M4800 that has its USB ports stop working in two cases so far. First, if I use the card reader at all, it works to access files, but then when I try to eject the card, it shows neither an error nor the "safe to remove" message. the card stays in the list of drives even after it's unplugged. If another USB drive is plugged in after this, it isn't recognized.
The second case is after using an external USB 3.0 drive for a while, it can stop working. The drive shows up in the list of drives, but all the directories appear empty. Unplugging doesn't remove the drive, and new drives aren't recognized. Once this happens, shutting down the machine crashes after a few minutes with DRIVER_POWER_STATE_FAILURE in either USBSTOR.sys or O2FJ2w7x64.sys. Could this be a hardware problem? It seems like the USB controller is locking up and the other drivers are getting blamed.
I recently re installed my Dell Precision M4800 laptop. In the device manager there is a driver not installed " Broadcom USH" I already searched for it, and there is one : Dell ControlPoint Security Device Driver Pack, but this device is not (yet) supported. Is there a way to fix this? I did not get any recovery cd with my pc, only a few drivers, not this one.
View 3 Replies View RelatedBrand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) - it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
I have a Dell Precision M4800 laptop with windows 7 64bit. The backlight keyboard goes off if there is no activity for 10 seconds. I'm wondering if there is a way to change this so that it stays on even if there is no typing? (I have no option to change this in the Windows Mobility Center).
View 4 Replies View RelatedI recently updated my Dell m4800 to BIOS A8 with Windows 7 64. I had been using a collection of older power adapters from my previous Dell m4400 without any issues. After the update, wow. A huge performance hit if I do not have the 19.5 volt and 9.23 amp adapter connected.
The m4400 power adapter is 19.5 volt and 6.7 amp. Pretty close right? Not any more.
I do have it connected to a Dell docking station almost all the time. Just checked. They are both 6.7 amp.
What changed in BIOS A8 and what the deal is with the performance? Looks like I need to request a new docking station, but I'm not sure IT will believe my story.
I have an Inspiron 15R SE 7520 and while typing, the cursor frequently jumps around and will begin typing in a previously typed line. This is extremely frustrating. I am running Windows 8 and have looked to find where I can adjust the sensitivity of my touchpad but can't find it anywhere. I've seen other posts for other computers that suggest uninstalling the touchpad driver and reinstalling it. What I should do for my specific laptop to stop this from happening? Do I need to uninstall and reinstall the touchpad driver. If so, how do I do that for the Dell Inspiron 15R SE 7520 running Windows 8? I'm also keeping my hands off the touchpad while typing but the cursor still moves.
View 2 Replies View RelatedThis has been happening when typing emails in Outlook. It will be interesting to see if it happens while typing this. So far it's been OK. I have a Dell XPS M1530. There it did it just then, the 1530 jumped into the subject field. It always jumps into somewhere I have already typed. So it doesn't just happen in Outlook. It is very annoying. I am using a Bluetooth mouse, but also there is a touchpad just under my hands. Could it be that I bump it by mistake?
I don't know it that's the problem as the touchpad cursor is different to the typing cursor. I'm watching the touchpad cursor and it's not moving. The typing cursor is behaving itself now. I have just moved the touchpad cursor up the screen a bit and the typing cursor is still behaving itself.
While I am typing my hands are well clear of the touchpad. It just jumped again, and it did not jump to where the touchpad cursor was, so it's not related to that.
I have a Dell XPS M1730 with 4GB Ram, 1TB in HD space. It is loaded with Windows 8.It works great except for one little thing. When I start typing I have to watch where the mouse is. If it is in the middle of the text I am typing, it will go there in the middle of me typing. This becomes very annoying.
View 3 Replies View RelatedI have in inspiron 4100 for about 14 months. I have noticed that while typing, the cursor my move back to a different position in the line, move to a previous line, or jump to another text box altogether. It drives me crazy that when I type, I never know if there is some combination of keys or if I accidently touch something to make the cursor change position.
Is there by default some combination of keys that cause cursor movement. It has happened 4 times while typing this message.
Can this be turned off?
Dell xps 15z ... I have an issue that the cursor disappears every few seconds whilst typing
To clarify it is the cursor and not the mouse pointer. When you click the mouse the cursor reappears in the right location so its not being moved by trackpad etc.
It appears that the tab/window open become de-active and the cursor disappears.
I have a dell inspiron N7110 laptop with windows 7 and my cursor keeps jumping back while I am typing. I have unchecked the enhance pointer precision box.
View 8 Replies View RelatedFrom time to time the cursor jumps to another line whilst I am typing. This can happen on any software, ie MS word, Hotmail. It can even happen when I am entering a user name and password into any system, for example this forum.
It is very frustrating and some tiesm a simple email can take a long time to type...
I have an Inspiron 1545 (warranty is expired) ...
Since the first time i used, the cursor moves from place to place while writing ...
I am using an external keyboard for the moment, but would like to know if it can be fixed ...
I have HP Pavilion dv6 notebook.My operating system is Windows 7 64bit.I am having problems with cursor jumping around while I type. I have had the notebook over a year, but this problem started a few weeks ago.
View 9 Replies View RelatedI received a Dell Latitude E6510, Windows 7, Bought January 2011
Problem: My text cursor jumps randomly around when I'm typing
I take care where i put my fingers: no resultI have the last drivers DELL_MULTI-TOUCH-TOUCHPAD_A06_R281462.exeI deactivated the touchpad: no result
I have 2 other Dell (Inspiron and Precision M65): This problem never occurred....
I teach online and my new Dell laptop Inspiron 15 3520 is useless. I cannot use it in online chat with students because now the cursor is moving to other lines of text and inserting my typing. I uninstalled the touchpad driver as that seems to be something recommended here. I tried to reinstall from the Dell website and it failed. So now I not only have an awful computer but a useless one. I'm regretting the Dell decision after just a week.
View 14 Replies View RelatedI bought Dell Inspiron 15R 6 months ago.
At first, the cursor works well. However, after 2 months usage, the cursor suddenly starts to runaway when I am typing in Microsoft word.
I have a g62 laptop with an external mouse and the cursor jumps all around when I am typing . I installed touchfreeze and unchecked "Hide Pointer While Typing" and neither worked. I also reviewed a suggestion to turn off "Touchpad" or something like that, and I can't even find this in my system.
View 1 Replies View RelatedWhen typing in a document, in wordpad for instance, the cursor (and text entry point) will suddenly jump elsewhere. Typically up a couple of lines. Since it happens while typing, I end up corrupting the document.
Disabling the touch pad does not solve the problem.