Dell Precision T3600 :: Restarts Automatically While Using Workstation
Nov 7, 2014PRECISION T3600 restarts automatically while using the workstation. We replaced mother board, graphic card and hard drive but still issue is same.
View 1 RepliesPRECISION T3600 restarts automatically while using the workstation. We replaced mother board, graphic card and hard drive but still issue is same.
View 1 RepliesI have an M6300 Mobile Workstation that does not turn on. The green "On" indicator goes on and then the Cap Lock indicator just blinks. The screen never turns on and I never see the Dell opening splash screen when starting the computer. I have to hold the power button for over 20 seconds to turn the unit off.
What is going on with this computer especially what the blinking Cap Lock indicator means? Can I guess that it could be a hard drive problem because it tries to start, but never does and hangs with a blank screen, a Blinking Caps Lock indicator and the "On" indicator on steady?
I cannot install any OS on my M6500 wether from USB or DVD.
I keep getting the error "Required CD/DVD drive device driver is missing" whenever i select to install windows.
I have my 2x 250gb drives in Raid 0 but i keep getting this error all the time, any kink to a driver ?
I own a Dell Precision M4800 Workstation running Windows 8.1 64-bit and the problem is that when I type text, no matter where (address bar, Office, iTunes, etc), and go to move my cursor immediately after, it takes about 3-4 seconds of me swiping on the touchpad to get it to move.
View 2 Replies View RelatedI've been a diehard thinkpad fan for years and I'm looking to upgrade from my T60p. I love the build quality, but I've been reading too many issues with the FireGL V5700 in the new W500 series. Moreover, I've read good things about overclocking the Quadro M770 to get closer to the M1700 speeds. So I'm now looking at the Dell M4400, normally I abhor the chassis construction of Dells, but the all magnesium casing of the 4400 series looks very good.
First, coming from a thinkpad, will I be satisfied with the build quality of the Dell?
Second, I'll be primarily using autocad, rhino and 3ds Max and have a question about the effect of screen resolution on the acceleration of the viewport displays in the various programs. Normally, I'd get the highest resolution screen possible, but will there be significant performance degradation from sxga+ (1440x900) to the wuxga (1920x1280) display when using these viewport accelerated programs due to the more demanding resolution?
Third, considering that the system uses DD2 memory, will I be able to upgrade the cpu to other Core2 ES chips that you can find on ebay? It looks like these chips use pins, I haven't been keeping up to date with the new mobile intel chips, are they all pga rather than bga format now?
And finally, when can i except some sort of deal on these systems on either the Canadian or American sites? I've been seeing a lot of 30% deals on inspirons and xps systems, but not on the precisions.
From all the specs listed on this machine it should be a CAD powerhouse, however it seems that there are a number of people on the net reporting lots of driver issues when trying to run CAD software.
I'll be running things like Solidworks and some other engineering aps that use some 3D modeling and am wondering if there is any kind of a consensus yet as to weather this machine is good to go or not. This machine will be used for work, so I don't want to mess around with something that will be crashing all the time.
Is it just the Dell bloatware that is causing the issues? If I reformat and reinstall the OS how difficult is it to find all the proper (stable!) drivers to get this machine up and running again?
I had to reformat my laptop - i think i now need to install many drivers though HP website link to HP EliteBook 8540w Mobile Workstation (ENERGY STAR) does not work
View 5 Replies View RelatedI really like the new EliteBook 8450w and 8470w and I think it is time to replace my Thinkpad W500. Can anyone clue me in on how my experience might be different? I know plenty of people with consumer HP laptops but I don't expect it should be anything like that.
How is the noise (my Thinkpad is very quiet)?
How is the "feel"? The plastic body on my Thinkpad makes it feel cheep for what it is.
How are the hinges?
How is the keyboard? I absolutely love that they fit a num pad in the 15"
How is the trackpoint?
Is it possible to add a second 24" monitor for use with my laptop, which is connected through a workstation. If so, what is required?
View 1 Replies View RelatedUsing Defender Offline "Beta" as instructed on MS website for Windows8.1. Created the media on a USB drive, then on a CD. Manually selected boot device on the boot sequence page. Followed all the instructions to the letter, but the Defender Offline media won't boot on this new W540, either on USB flash drive, or on the CD drive.
View 2 Replies View RelatedFirst of all i want to say i have a dell xps 1530, Vista.
Recentrly ive reinstalled vista and now i have something strange going on.
When i got to start (i dont use button) and click on hibernate, notebook save data and when he is about to shut down, it just starts all over, the data doesnt go loss, so it starts the same as i did leave it in hibernate.
The strange thing is that, when i after this try to shut down it restarts again, so the only thing left to do for me to push the button so it just manualy shuts down.
One more thing, when i start again, and i direcly try to hibernate or shut down then it does his job, everything happens as it should be.
I am trying to find out who the ODM ( original design manufacturer) is for these precision models, dell no longer sells them, perhaps there is another channel for buying one besides Dell???
If anyone has any information please let me know and also what model not just the ODM's name.
For example ALienware laptops are made by the ODM Clevo which also sells the same Chassis without the alienware bling and price under the name of Sager, Averatec also as I recall ....
I don't know if this is something I did or that came part of the bios in the m1710, but I have the A03 bios and I had just installed and uninstalled I8kfangui , then, after I had rebooted and tried to clean out as much as I could, I was pretty exhausted and laid my head on the keyboard. I noticed the fans stopped then came back on. I did this a couple times before figuring out that this fn + z combination somehow stops and restarts the fans, even at gaming temps. sooooo, I'm wondering, is this by chance screwing up my normal fan control, my temps, etc? Did I do something to cause this? Is it normal? or did I8kfangui do it, and why can't I get rid of it.
Another note, it doesn't work right when I boot up, only after windows is running for a couple minutes.
My Dell Inspiron 17 N7110 Keeps shutting itself down, recycling its system (I am sure I am using the wrong terminology). It will get to the dell logo screen and then go blank and restart itself. I spoke with someone at Techzilla who said that this has been happening to other people with this model. I removed the battery, tried hitting the F8, F11, F2 and F12 buttons. When I hit the F12 button the screen went to a black screen with a blinking curser in the upper right hand corner. This screen lasted about a second or two before it shuts down again and starts to recycle again. I was told that it's a software problem (that I downloaded a virus) but if others are having the same problem then I think it's a dell model issue not a software issue.
View 4 Replies View Relatedmy dell inspiron 1545 wont start up. when it does it goes to the..... start windows normally, or repair and when i click repair it goes to ```getting windows files then stops for a while. then goes to to a black screen and stops for a while. then it goes to the windows7 screen but no icons come up.
when i try to start windows normally it flash's blue then restarts itself.
I have an Inspiron 15R 5521 that intermittently restarts at various times. It doesn't seem to matter whether I am working in an MS Office Application or Firefox, IE, Chrome at least as far as noticing a pattern.
I have tried to run the diagnostic tests on the Dell Support site numerous times and keep getting the message "A problem has been detected, please try again" at the third step in the Diagnostic test process, 'Installing my Dell client'.
I have a Latitude E6320, running Windows 7 SP 1 (64-bit). I have all the required and recommended patches installed. I generally use my laptop on a part-replicator. Recently, my laptop has been restarting when I hibernate my computer using either the on/off switch or the start button on the task bar.
View 3 Replies View RelatedI was trying to boot in safe mode so i went into boot options checked safe boot and minimal. Then when I restarted, it just kept restarting over and over again. I can't get to safe mode. I can get to the setup and boot manager. I tried running diagnostics and there were no errors.
View 3 Replies View Relatedwhen i turn on my laptop it tries to auto-fix a problem, then says it cant.
Then it either restarts or shuts down.
I dont know what the problem is and untill its solved i cant use my laptop.
I have a 1525 laptop that wants to stay awake most of the time. I have it set to hibernate when the cover closes. It behaves most of the time, but occasionally it decides to restart instead of hibernating. When it's acting up, it will do the restart if you try to put it in hibernation, sleep or if you try to shut it down. The only way to kill the thing is to do a hard shutdown using the power button. It's annoying to say the least, since you can't just close it and walk away. If it restarts with the cover closed, it gets way too hot.
View 2 Replies View RelatedI'm having issues with my Ibook G4. I'll start it, it'll run fine for a few minutes, and then freeze up to where no matter what I do, nothing happens, and then I restart it only to have the same thing happen again. I'm thinking it's a software issue, cause when I ran the hardware test, no issues showed up.
View 10 Replies View RelatedVista Home Premium, didn't have a disc so ordered one from Dell. Upon startup it ask me to put a disc in to repair.
Will this work, my understanding you needed a Vista disc, and this computer does not seem to have a partition with Vista on it, for the repair. I wondering if this will work? I tried diagnostics everything seems fine, but it loops to safe mode.
I have dell inspiron N5110 laptop with i5 processor and in-built graphic card.When i start my lappy it asks for password and after that it shows a blue screen for about 1-2 seconds. Then either it automatically restarts or after some time a black screen appears like given below:
I have also run diagnostic test and all options are ticked marked EXCEPT hard drive_0
I have Dell N4010 laptop with 4GB ram (1333 Mhz, 2X2) purchased in Jan 2011. Recently I bought transcend 4GB 1333 and have removed existing 2GB ram and replaced with 4GB to increase the physical memory to 6GB. I can see that the ram has been detected and the total is showing up in Bios. After this, the system does not boot, it just keep restarting.
I tried to start with safemode, however the files load but at the end, I receive a blue screen with error like '...Bad pool header...'.
OS: Windows 7 x64
Bios version: A13
I have a Sony Vaio VGN-SZ483N with Windows Vista Business Edition SP1. For some reason, everytime i first boot up my laptop Vista will automatically restart with no error messages whatsoever.
I disabled the automatic restart option in vista and the same thing happens. However, once it's done the initial restart everything works normally and therefore i dont think it has anything to do with over-heating. I used to have windows xp pro sp3 and this did not happen
For some reason every time I shut down my pc it restarts itself like 5 seconds after it turns off. I looked it up and someone said try unplugging the Ethernet cable. So I did and when I unplug when I shut it down it doesn't restart itself but only when I leave the Ethernet cable in it. Why is that? Also down on my currently connected icon by the clock why does it show that i'm connected to two networks? I had xp pro before and it only showed me connected to one network but on this new computer it shows me connected to two networks. Network 2 and Network 3, is that normal?
View 10 Replies View Relatedmaybe not always but verry often. 1 or 2 sec after shutting down it reboots. i haaate that!
W520 4270CTO 2028QM WINX64 MSATA SSD 16GB
I have had my Yoga 13 for a couple of months now (I bought it refurbished from the Lenovo Outlet). It is running Windows 8.1, with 4gb of ram.
Since I upgraded to Windows 8.1, which is practically the entire time that I have had the system, I have been getting low memory warnings and software crashes related to this. When getting these warnings and crashes I am usually running IE (maybe 4 - 5 tabs) and 2-3 pdfs in Adobe Reader. It only has 4gb of ram, but in my mind, this cannot overload the memory on this system!
In fact, I just got the low memory message now ("Your computer is low on memory. Save your files and close these programs: Internet Explorer") and I am only running IE (4 tabs) in the foreground. I don't think that this is an IE issue, because this problem is even worse, when I am using Chrome. That is what prompte me to switch to IE.
When I check in task manager right now, it says that I am using 81% of memory. IE is using 300mb (which seems very excessive) and there are other programs running in the background - none are using more than 50mb and most are using less than 20mb.
The other part of this problem is that when I am working normally (again with a few IE tabs open and a few pdfs open), the system randomly restarts itself, with no error message or anything. All of a sudden, the screen just shows the login screen and Windows starts as if nothing happened.
I have had this laptop for 7 months now, but since about 4 weeks ago when i click on shutdown i realised that it looked like it was shutting down... and 30 seconds later would fire up again. At first i thought it was me clicking the wrong button, but it has happened daily now. Only way to shut it down is my removing the power cable and then shutting down.
View 6 Replies View RelatedAll Windows, drivers and antivirus are updated and free of virus and/ro coruped files. Chekdisk reports no problem. cannot read Mini DUMP files. Blue screen to quick to read.
View 5 Replies View Related