Dell Precision M4800 :: Fan Noise Without Substantial Load
Nov 19, 2013
I'm a proud user of an M4800, but the constant fan noise bothers me a lot. I ordered it wit win7 but almost directly switched to win 8.1.
What I already discovered: In the event viewer I experienced a lot of MSI error events (every 11 seconds) .
Event filter with query "SELECT * FROM __InstanceOperationEvent WITHIN 10 WHERE (TargetInstance ISA 'Msvm_ExternalEthernetPort') OR (TargetInstance ISA 'Msvm_VmLANEndpoint') OR (TargetInstance ISA 'Msvm_SyntheticEthernetPort') OR (TargetInstance ISA 'Msvm_ComputerSystem') OR (TargetInstance ISA 'Msvm_VLANEndpointSettingData')" could not be reactivated in namespace "//./root/virtualization" because of error 0x80041010.
Events cannot be delivered through this filter until the problem is corrected. If I stop the Intel(R) PROSet Monitoring Service these events stop, but I wonder if the performance of network devices is not affected negatively:
The Intel(R) PROSet Monitoring Service actively monitors changes to the system and updates affected network devices to keep them running in optimal condition. Stopping this service may negatively affect the performance of the network devices on the system.
Nevertheless after this action CPU usage has dropped, but still too much fan noise while the system does nothing ;o(
I contacted support and they adviced me to reinstall with win7, but that is no option for me for the moment.
My power options are set to 'Quiet (Reduced Fan Levels)'
In the BIOS vA03 I could not find an option to lower settings there. and all latest drivers are downloaded and installed.
View 15 Replies
ADVERTISEMENT
Nov 15, 2014
I bought an RFB Dell Precision M4800 .... When I used my laptop in the ark. My keyboard hadn't been enlighten.
I tried follow some suggestion as: install Dell Feature Enhancement Pack v2.2.1
But I didn't find "Dell Keyboard Backlight Settings" on control panel as guidance.
View 2 Replies
View Related
Jan 7, 2015
i Bought a dell precision m4800 it came it windows 8 i updated it and now my wifi switch is not working it does'nt turmn off and now i can't turn the bluetooth on as well, it says that you need to turn on the wireless hardware but it is already on
View 1 Replies
View Related
Jan 4, 2015
I have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
View 2 Replies
View Related
Nov 30, 2013
Having a strange issue with the Touchpad on my Dell Precision M4800. When I disable it using the Dell software or using the Fn+F5 hotkey, it has a tendency to come back on after a random interval of time. I want it to stay turned off permanently, as I prefer to use the Pointstick exclusively.When using the Fn hotkey, I get a notification onscreen as well as a popup in the system tray saying "Touchpad notification: Your touchpad has been disabled." If I manually disable it through the Dell Pointing Devices software, I get the same effect, but without the notification. In either case, this works great... for awhile.But then the Touchpad inevitably turns back on. I often don't notice until suddenly my mouse cursor is behaving erratically, at which point I try to swipe my finger on the touchpad and sure enough, it's become enabled again.
However after some further experimenting it turns out the "random" aspect of this is not totally random and I can reproduce the issue quite reliably by furiously scanning my finger back and forth across the Touchpad for a few seconds. Inevitably, the touchpad will turn back on, and I will get the notification "Your touchpad has been enabled." No buttons or hotkeys are pressed, all I have to do is move my finger on the touchpad surface rapidly and within seconds of starting to do that, it will re-enable itself. Again, there is also a notification that it has been re-enabled when this happens, so the software is detecting my finger movements somehow, perhaps I am accidentally performing some "magic gesture" that compels it to re-enable the touchpad.
If I don't intentionally try to cause this, it still turns on eventually, but can take a long time, half an hour or more before it becomes enabled again. I assume it's the activity of my palms resting on it that will accidentally turn it on again in the same way as swiping my finger intentionally across the disabled touchpad. It makes no difference whether the Dell Pointing Device software is open or closed and this will happen when any application is open.
All I want is for the touchpad to be truly disabled permanently and not accidentally turn on in the middle of my work. But at the same time I'd prefer to leave the pointing stick enabled, so I can't simply remove the driver. So far I've been using an external mouse and disabling all internal pointing devices, which works ok, but like I said I am fond of the pointing stick, I'd prefer to be able to leave it on with JUST the touchpad disabled.
System specs: Dell Precision M4800 with qHD screen
CPU: Core i7 4800MQ @ 2.70Ghz
Graphics: nVidia Quadro K2100M
OS: Factory-installed Windows 7 Pro 64-bit
Dell Pointing Devices software version v.8.1200.101.134
View 12 Replies
View Related
Dec 16, 2013
This laptop isn't even one month old.. this is sincerely frustrating as i have alot of important work saved on here...
-When I plug in the charger.. the battery light turns on for a second then the battery light turns back off.
-When I try to turn on the laptop with the charger plugged in.. nothing happens at all. When I try to turn on the laptop with just the battery without being plugged in.. the power button will light up for a second then go back off.
I've tried: taking out the battery and holding down the power light for 1 minute.. waited 30 seconds tried turning it on with the power chord with no prevail. holding Fn and turning it on and nothing
Some signs I've been seeing: only bad signs i've seen was before it just didn't boot anymore.. maybe twice out of the 6 last time i've booted.. as soon as i typed my password to get into windows it would just shut off. i'd jus reboot and it worked fine. when it stopped turning on.. after messing with plugging it in or not (i didn't know if the battery was dead) i was able to make it past the windows sign on screen.. was going to email myself all my work before it suddenly shut off on me again. the battery had maybe 1/3rd life before it died
I might have interchanged battery chargers with another older dell model laptop.. but i think only a few times at most.. it mostly sits at work on a docking station at work. i have a feeling i never did though. from what i've read it seems like the battery chargers are all compatible as long as it's dell.
View 3 Replies
View Related
Jan 2, 2015
I recently ordered Mushkin Enhanced Blackline 16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model 997067 - Newegg.com to upgrade ram on DELL M4800. When installed it doesn't let the Laptop to boot. Newegg says this is compatible but the product doesn't.I'm sure I installed it properly. By any chance,did I receive a defective product ? or is the product incompatible unlike Newegg's Memory finder suggestion ? Newegg charges $15 restocking fee, so I would like to make sure i'm not doing something wrong before before returning it.
View 5 Replies
View Related
Dec 31, 2014
I have a Precision M4800 that has its USB ports stop working in two cases so far. First, if I use the card reader at all, it works to access files, but then when I try to eject the card, it shows neither an error nor the "safe to remove" message. the card stays in the list of drives even after it's unplugged. If another USB drive is plugged in after this, it isn't recognized.
The second case is after using an external USB 3.0 drive for a while, it can stop working. The drive shows up in the list of drives, but all the directories appear empty. Unplugging doesn't remove the drive, and new drives aren't recognized. Once this happens, shutting down the machine crashes after a few minutes with DRIVER_POWER_STATE_FAILURE in either USBSTOR.sys or O2FJ2w7x64.sys. Could this be a hardware problem? It seems like the USB controller is locking up and the other drivers are getting blamed.
View 3 Replies
View Related
Sep 15, 2014
I recently re installed my Dell Precision M4800 laptop. In the device manager there is a driver not installed " Broadcom USH" I already searched for it, and there is one : Dell ControlPoint Security Device Driver Pack, but this device is not (yet) supported. Is there a way to fix this? I did not get any recovery cd with my pc, only a few drivers, not this one.
View 3 Replies
View Related
Nov 18, 2014
Brand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) - it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
View 1 Replies
View Related
Nov 18, 2014
I own a Dell Precision M4800 Workstation running Windows 8.1 64-bit and the problem is that when I type text, no matter where (address bar, Office, iTunes, etc), and go to move my cursor immediately after, it takes about 3-4 seconds of me swiping on the touchpad to get it to move.
View 2 Replies
View Related
May 3, 2014
I have a Dell Precision M4800 laptop with windows 7 64bit. The backlight keyboard goes off if there is no activity for 10 seconds. I'm wondering if there is a way to change this so that it stays on even if there is no typing? (I have no option to change this in the Windows Mobility Center).
View 4 Replies
View Related
Sep 19, 2014
I recently updated my Dell m4800 to BIOS A8 with Windows 7 64. I had been using a collection of older power adapters from my previous Dell m4400 without any issues. After the update, wow. A huge performance hit if I do not have the 19.5 volt and 9.23 amp adapter connected.
The m4400 power adapter is 19.5 volt and 6.7 amp. Pretty close right? Not any more.
I do have it connected to a Dell docking station almost all the time. Just checked. They are both 6.7 amp.
What changed in BIOS A8 and what the deal is with the performance? Looks like I need to request a new docking station, but I'm not sure IT will believe my story.
View 3 Replies
View Related
Apr 25, 2009
for some reason my hd would take forever to load and made clicking noises.
but then it goes away after a couple boots that take forever to boot..
now it acts all fine boots fine and everything..
m1730..
View 3 Replies
View Related
Jun 27, 2009
I was browsing the web when my Optiarc DVD drive on my 1536 made a very loud screeching noise.
It sounded similar to someone scraping a knife on a plate really hard, repeatedly, then followed by a softer scraping and then it stopped.
View 10 Replies
View Related
Apr 9, 2012
my laptop is 1 week old and the fan constantly switches on and off, its under no load just idling, its a very loud and annoying problem, when I spoke to Dell they claim to have no knowledge of the problem, how can this be when a search shows up plenty on the subject.
they sent a technician out with a new fan but did not bother to replace because it will not solve the problem.
they are sending a new replacement, but I think it will have the same problem.
its a shame because I love the XPS, Dell need to get there act together and solve the problem.
my laptop came with latest bios and still has fan problem.
View 10 Replies
View Related
Dec 10, 2014
I have a Inspirion N5050 laptop. A few weeks ago, it started running slow and Adchoices ads appeared. I removed them. I ran a scan using AVG, which detected nothing. I shut down the laptop as a precaution. Now it will not load Windows. I press the power button, the dell logo appears, then I hear what I think is the hard drive click, then the screen goes dark for a second, then the logo and a click and so on and so on. I am able to get to the menus with f2 and f12, what to do next. Safe mode will not respond ( I cannot get into it).
View 2 Replies
View Related
Dec 16, 2014
I have very annyoing problem in my M4500. Coil Noise while laptop is not used (idle). How I can fix coil noise ? I have the latest BIOS A15.
View 2 Replies
View Related
Jan 12, 2015
I have a new M3800 Precision Workstation that is making a really annoying sound when it is plugged into power and when the SSD is being accessed, mostly when it is being accessed randomly such as search, VM running, or just random file access test from benchmarking software. The pitch of the scratchy sound varies with screen brightness.
I've made a video of it here [View:youtu.be/jbEkRDrPTdA:550:0]
[URL]
View 3 Replies
View Related
Mar 10, 2009
Why ist it, that the CPU fan runs with 3000 rpm, when the CPU is idle and the temperature of the CPU is 37 degrees? Also the chipset temperature is not that high. I made you a screenshot:
I tried everything to get the fan start much later. I used Artic MX-2 thermal compound, liftet my M4400 higher, undervolted it, but nothing works.
In my point of view, DELL made something wrong by programming the BIOS. Is it unnecessarily to run a CPU fan at 3000 rpm when the cpu is cool enough.
Maybe 800-1000 rpm would be fine.
So my question is:
Is it possible to use a kind of speed controller, know from desktop system, to making the fan run much slower?
As far as I see, Dell uses a 4-lines PWM connection the the mainboard.
View 10 Replies
View Related
Mar 11, 2009
I am trying to find out who the ODM ( original design manufacturer) is for these precision models, dell no longer sells them, perhaps there is another channel for buying one besides Dell???
If anyone has any information please let me know and also what model not just the ODM's name.
For example ALienware laptops are made by the ODM Clevo which also sells the same Chassis without the alienware bling and price under the name of Sager, Averatec also as I recall ....
View 6 Replies
View Related
Nov 11, 2009
I have an m1710 laptop. A few days ago when I wanted power it up it would start loading, but nothing would show on the monitor and the LED indicators near the media button would light up.
The first one from the left would stay on and next two would flash together while the last two are off. I tried hoilding down FN key when loading so I can load dell diagnostics but it won't do that. Tried to hookup an external monitor but that didn't help.
Tried powering up with the d key pressed in to run a graphics check but didn't work. Since the comnputer is no longer under waranty I took it apart and took out the Nvidia card and cleared the dust around it.
Right after that the computer loaded fine but today it got stuch while in windows and when I tried loading it I got the same err msgs with the LED indicators. I talked with Dell locally and they told me it's 99% the Nvidia card
View 7 Replies
View Related
Sep 22, 2007
Just installed a T7600 in my E1705, and full-load temps are 74C. I don't remember what me T7200 ran at.
View 15 Replies
View Related
Jul 26, 2009
This is on a vostro 1400 with the notorious 8400M. Recently, whenever I run a game (any game, even older ones like WC3) or anything graphics-intensive such as movies, the cpu load increases until it hits 100% and the system basically freezes until I exit whatever program was running.
For the first 5-10 of a game, everything runs smoothly, but eventually the cpu load maxes and I have to quit. the sound is also messed up, which i think is just an effect of the cpu load.
View 4 Replies
View Related
Dec 8, 2008
where to buy a 6x slot load blu-ray player to up grade my dell studio 17 notebook
View 10 Replies
View Related
Mar 21, 2010
I bought yesterday the 640GB WD HDD and I tried to install it but Windows will not load. It will get stuk in the "loading screen" and will not advance to ask my password.
To complicate things, Windows actually loaded once, the driver setup programm was launched, the HDD was not visible and when I tried to restart it got stuck again.
Once I removed the drive everything loaded as usually.
View 6 Replies
View Related
Jul 9, 2009
I just got the xps 1640 today and I'm very distracted by the loud system fan. It's audible all the time even when the computer is idle. I haven't been doing anything intensive on my computer either. The fan starts as soon as windows loads and never stops. I know this laptop has heat issues but I checked the core temp and it is only between 38-45degrees C. I know the fan can get louder under load, this is what I would describe as idle but still, it seems way too loud. It was raining earlier and I could hear the fan over the sound of raindrops hitting my roof. It's getting unbearable!!
Has anyone had the same experience? Or more importantly does anyone have a way to reduce the speed of the fan slighty? Speedfan doesn't seem to support my motherboard so I can't do it there.
System:
P8600 2.4ghz
4gb ram
320GB (7,200rpm) WD HD
View 10 Replies
View Related
Jul 23, 2007
I8200 with orginal 40GB hitachi HD DK23EB-40. So I left the notebook run overnight (nothing new) has cooling pad and another fan sitting on the side running air over it. When I came to in in the morning it was locked so I rebooted. I got an error message and it doesn't want to boot. It does boot with another HD I have so the HD is the problem. I previously had a problem with another used HD that had a problem like this on another laptop and had someone i know work on it. To me it looked like he made a partition and placed the whole corupted OS with files inside of a fresh os install. I don't want to try and do a repair with the reinstall CD. Tried that once and didn't work so I don't want to to take a chance. Anyone know what he might have done? I have partition magic 8 if this is what's needed, but how to do this?
View 12 Replies
View Related
Oct 23, 2009
After a month of using my laptop, today is actually the first day I'm trying out this slot load drive.
I inserted a CD given by my instructor, it was running really slow and some cranky / buzzing noise could be heard from it. I mean is it normal ? It loads kinda slow too.?
View 7 Replies
View Related
Feb 27, 2009
Everything was working fine until lately I noticed that during the BIOS the loading bar stops 4/5 of the way for around 10 seconds,
then I hear the slot load drive turn on and only then my computer boots up .....
View 4 Replies
View Related