I bought yesterday the 640GB WD HDD and I tried to install it but Windows will not load. It will get stuk in the "loading screen" and will not advance to ask my password.
To complicate things, Windows actually loaded once, the driver setup programm was launched, the HDD was not visible and when I tried to restart it got stuck again.
Once I removed the drive everything loaded as usually.
This is more for other people's information than my own. I upped my RAM from 2gb to 8gb and when booting afterwards, the system would repeatedly hang before the BIOS screen.
I removed each module one at a time, finally getting down to zero and putting my old RAM back in. The problem persisted. Apparently when the amount of system RAM changes, it scans everything for quite a while or something. I really don't know why.
It took nearly 5 minutes to boot the system. After that, I rebooted and it was fast as can be. Anyway, it was kind of nerve wracking and I was upset by the whole thing, so I'm hoping maybe someone will see this and be able to avoid the same stress I went through
I have Dell Inspiron 5447 i3 with AMD Radeon R7 M265 with Windows 8.1 and have recently updated all needed windows updates.
I know how to add applications in the switchable settings as high-performace with *.exe extension but when I installed applications from the apps store (i.e. Asphalt 8 - Airborne, etc.) I cannot seem to add them to the switchable graphis settings to get the AMD GPU used. I know that the AMD GPU not getting used because I used a monitoring tool (openhardwaremonitor) that says it was not used. I can add applications like some other games I installed but not from the windows apps store so now I am really confused.
How can I get the AMD graphics to work with some apps in the apps store (specifically in my case, Asphalt)
I have a "Hive" error message that displays on a blue screen. Windows does not load. Any wa getting this machine going ....
View 2 Replies View RelatedHave a problem with HP ENVY M6-1106er After upgrading OEM Win8 to Pro version, I have added Hyper-V role to my system and reboot the laptop.
After reboot OS startup freezes on screen with HP logo and rotating circles. If I disable AMD Virtualisation in BIOS - system boots, but hypervisor doesnt work. With enabled Virtualisation in BIOS system doesn't boot with installed Hyper-V role.
My Studio 1558 passes' the post test with the Dell logo and black bar underneath. Windows 7 does not load but the cursor appears in the upper left hand corner of the monitor. I can't log into safe mode or do anything with the computer.
View 1 Replies View RelatedMy PC worked fine for the first few days and then all of a sudden about 1/2 the time I would try booting up I would get past the BIOS post screen and then would only see a blinking underscore cursor in the upper left and it wouldn't load Windows at all.
I've reinstalled Vista SP2 clean, tried a clean install of Win7 RTM (fully legal) and then Vista SP2 clean - all with the same result of 50% or thereabouts the PC not getting past the blinking cursor undersco
I have been trying to load a retail version of Windows 7 HP x64 using USB on my Windows Vista HP x86 Acer 1410. I am able to boot from USB and the Windows 7 install program starts. I select Custom Install to do a new installation (not an upgrade). After I select the partition to install to, I get an error message like "can't find a system drive to install to..." I have tried this on two different 1410's with the same results.
It was the particular USB SD Card Reader I was using. I don't have a 4GB USB drive so I was using a USB SD Card reader and an 8GB SD card. I switch to a different Card Reader (same 8GB SD card) and it worked first time!
I purchased a refurbished Dell e6410 about a year ago. The Laptop was working find with no issues. But in mid August, I did a windows 7 update... After the update, windows restarted... But instead of booting up to windows... It went to "startup repair". It ran this several times until is said it could not repair the startup.
I ended up having to do a recovery and reload windows and re-image my HD... After doing that, I tried windows update again. Same issue. after windows update... It would just got to startup repair.
Again, I had to restore my OS and re-image my drive. I tested and checked the HD and go no errors. Ran disk check and disk check /r... But if I tried to run a windows update it would just go into startup repair and I would eventually have to just reload my os and re-image the drive.
I spoke to an agent from Dell about it... He suggested I wait a month before trying to do the windows update. Perhaps they have a bug.
So I waited two months and tried an update again, last night. This time, I would get the dell logo, with f12 option, that would go away and then "windows is loading necessary files", but then the screen would go black and dell screen came up gain, then "windows is loading necessary files". I let it do this for almost an hour. Windows never started... I had no option to get into safe mode or any other boot modes. I have a regular desk top pc that I have done windows update and it has no issues.
I am running windows 7 64bit.
Shut it off one day and it wont load windows the next day. I get to the HP logo on start up and then the screen goes blank. After about 5 mins, the HP logo come back up again indicating the system is stuck in a restart loop. I cant get it to enter safe mode. I have removed the battery and held down the power button for up to 60 secs. No go. By hitting the escape button while the HP logo comes up, i was able to get to a limited menu where you can check memory and supposedly the hard drive. Ran through all that. No go. Removed CMOS battery for 5 minutes. No go. About the only thing i have not done yet is reseat the memory. I'll try that soon. From experience, am i looking at possibly a dead HD or is this sounding like a mobo issue?
View 4 Replies View RelatedI have tried unsuccessfully to load windows 7 64bit onto my z17 and every time it loads the 32 bit version.
I have tried changing the bios to later version that are shipped with 64bit operating systems without any luck
when i turn on my Acer Aspire 3000 i put in my password then it makes me choose a windows xp as i have a dual boot but even if i choose either one it give me the message: "windows could not start because the following file is missing or corrupt <Windows root>system32hall.dll
View 5 Replies View RelatedI have got acer TravelMate P253-E. since last restart it is unable to load windows 8. whenever I start it says"preparing disk recovery" and after "do not turn off the device this might take more then hour" and goes on like this forever. I left it one whole night but was still the same.
View 7 Replies View Relatedi have a Acer Aspire V3-571. I what to run my windows in uefi.
View 1 Replies View RelatedAny experience installing Windows 7 x64 with the Precision M6400..
the Vista x64 drivers will work on Windows 7 x64 ?, it's faster or better..
I have a DV3Z with a slot-load DVD drive.
I somehow messed up my Windows 7 installation and get a BSOD every time I try to boot into Win7 or even safe mode from the hard drive.
However, what I can NOT figure out is how to EJECT the disc in the drive.
I can get to a command prompt via the Startup Repair advanced options, but there doesn't appear to be a command to eject in the disc.
Is there a keyboard combination I can press at power on to eject the disc?
I have a Dell M6400 running Windows 7 64-bit.
I also have an external My Book 500 GB with triple connectivity (Firewire, USB and eSATA).
When I connect this external HD with the eSATA cable on my M6400 while running XP 32-bit it works perfectly.
Attempting to do the same thing while running windows 7 64-bit will typically result in file transfer hanging somewhere in the middle (this also hang windows explorer). I then have to disconnect the eSATA cable to resume windows operation.
The USB mode works fine, but the Firewire seem to have to same issue than the eSATA.
I am wondering if anybody else is having similar issue and / or anybody has any idea(s) as to how to fix this.
I can use the USB, but I frequently have to transfer virtual machine back and forth so I could definitively benefit from the eSATA improve transfer rate.
I run the HD Controller in AHCI mode
----------
Dell M6400
Intel Core 2 Quad - 2530
4 GB Memory
2 HD (1 Patriot TorqX 128 GB and one Seagate Momentus 320GB)
BIOS: A07
Ran win7 on my M6300 for quite a while with no problems... M6400 just showed up and I can't seem to work it out. seemingly random BSODs that hit at any time. Analysis shows that the first one was caused by csrss.exe, most after that were caused by ntkrnlmp.exe,
Has anybody else had this happen and figured out which driver is causing the problem? Maybe I should ask "has anybody else installed win7 build 7100 64-bit on a M6400 and *not* had problems like this? If so, what drivers did you install beyond what windows update does for you?"
System config is:
Q9300 quad-core proc
4gb RAM on 2 DIMMs
3700M video
RGB-LED screen (if that matters)
64GB samsung SSD, 500gb WD 5400RPM HD (aftermarket) as secondary drive
verizon rev-a evdo mini-pci card
intel 5300 a/b/g card
fingerprint scanner
i think that's all the important parts...
the first bsod happened before i had installed just about anything at all, other than windows updates. i've been throwing just about every other driver i can find at it to see if i can narrow it down (with the intent of reinstalling from scratch once i figure it out). every time I think I have it figured out, I'll look over at it and notice that it is BSOD'ed or post-bsod rebooting.
Why not share how 7 run on our precisions m6400 ?
I'm using win 7 build 7048 x64 working really well (way better and faster than XP sp3, however I never thought to use Vista..).
there was some issues with build 7000 and Adobe CS4 production apps (like premiere, encore, AE) now solved with 7048
The only nvidia driver I found working well are 179.44 for Win vista x64, installed without modding nv_disp.inf
the one provided from windows update for 7 (179.43 win7 i think) was not working (the screen turn white).....
Yup me again, in my hunt to determine if M6400 is right for me as it costs just about as much as a used car, I want to make sure its a good investment before I buy it.
What is the main difference with the M6400 and the M6400 Covet?
I configured both with the same specs and the Covet is about $900 more in price?
Does orange paint really cost that much?
a have a acer aspire 5630 and my dvd driver has a problem this is what it says Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
View 5 Replies View RelatedMy HP Pavilion 15-n230us Notebook PC (ENERGY STAR) Product # F5W29UA, is having problems with the DVD player. I went to the Device Manager and found the following error code:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39){Unable to Load Device Driver}%hs device driver could not be loaded.Error Status was 0x%x..I don't know if I made any changes that may have caused this error, I don't remember whether or not it was working previously.
My laptop hp mini 110-3605tu model number is facing stuck after windows 7 installation load. It has no recovery hard drive as hard drive is fully formatted. i want to flash my bios because i know bios is corrupted. How can i flash my bios using usb drive. What is the bios manufacturer company so that i can flash my bios using non windows application ....
View 8 Replies View RelatedEvery time I start my laptop the bios beeps once and doesnt load windows automatically. I reinstalled windows 8.1 and installed all required drivers. I recently updated my bios to the latest one F.50
After doing uefi diagnostics I found this error:
2014-11-04 18:14:37 Starting VideoDiags.udm version 1.03 built Sep 10 2014 13:54:422014-11-04 18:14:37 VideoDiags.UDM init complete2014-11-04 18:14:46 Video Palette Check Completed - Result 32014-11-04 18:14:46 Error Code=0xC092014-11-04 18:14:46 2014-11-04 18:14:47 Warranty Start Date : 04/15/20142014-11-04 18:14:47 WarrantyID String size = 602014-11-04 18:14:47 Warranty ID = 9G82M1-73979L-QFPJXG-Q2C5032014-11-04 18:14:51 Video Palette Check Completed2014-11-04 18:14:54 EFI HP BIOS Management Started
I don't have the option D2D listed in the BIOS >> Main - so I can't turn it on :-) and going to F10 while booting has no effect. When I examine the disk (out of the computer) I do see drives C: and RECOVERY(Y
View 2 Replies View RelatedI don't have the option D2D listed in the BIOS >> Main - so I can't turn it on and going to F10 while booting has no effect.
When I examine the disk (out of the computer) I do see drives C: and RECOVERY , so what to do next?
I am running a RAID0 array on fast hard disks (ok, so they ain't SSDs, but still!)..
it came out at 6.3 which was the lowest score - lower than the FX2700m for gaming - which suprised me given that in Vista the hard disk got max marks and the FX2700m didn't..
why the Windows 8 camera app show the camera with a slash across it instead of an image?
I also tried the manycam app and same behavior is noticed. Is the camera bad? I checked the driver version it is the latest that is on the Lenovo Site for Windows 8.
I was using my hp pavilion dv6 notebook and then it got a blue screen with white text (I believe hard drive problem , idk)
I restarted the computer and my computer couldn't load my Windows 7 OS. I already tried Safe mode, I tried to the repair option. The computer tried to repair for 7 hour without any results. I already tried resetting with Windows recovery disc, didn't work..
I have a "Hive" error message that displays on a blue screen. Windows does not load.
View 2 Replies View Related