Dell :: Studio XPS 1640Blinking Cursor At Start, No Windows Load
Aug 11, 2009
My PC worked fine for the first few days and then all of a sudden about 1/2 the time I would try booting up I would get past the BIOS post screen and then would only see a blinking underscore cursor in the upper left and it wouldn't load Windows at all.
I've reinstalled Vista SP2 clean, tried a clean install of Win7 RTM (fully legal) and then Vista SP2 clean - all with the same result of 50% or thereabouts the PC not getting past the blinking cursor undersco
My Studio 1558 passes' the post test with the Dell logo and black bar underneath. Windows 7 does not load but the cursor appears in the upper left hand corner of the monitor. I can't log into safe mode or do anything with the computer.
I have Dell Inspirion 3520 Laptop, And its come with Window 7 and I have recently its updated with window 8 after this i got a issue that when I start typing the cursor jump to somewhere else or select something.
I'm using Dell Studio 1555. I've use it around 3 years. Last week my laptop start making up problem.
Firstly it will suddenly restart while i'm using it. Sometimes it will come up blank screen and need me to restart back.
After that during start up my dell logo will take times to pop up. And will ask me to repair my window.
I've read some post here said that it maybe because of the CMOS battery and I've already change it and dell logo is pop up a little bist faster than before.
But right now my laptop could not be start up. When I power up, the LED button at the On/off button is ok.
The fan also running. When I plug in my Iphone it will be charge but there is nothing on the screen.
I've also put on external monitor but also didn't show anything.
And also there is no sound @ beep during my start up.
My laptop is Dell Studio 1558 with Windows 7 as the OS. The issue is that now when i try to turn on the Laptop, its go'n to "Windows Error Recovery" with following options to enter:
"Launch start up repair" and "Start windows Normally"
I tried both the option at two different times but its not fixing the error or starting windows normally and its stuck at "Starting Windows" screen. Then I tried to use F12 - Boot option- Diagnostics for which I am getting the following errors:
"Error code 0142Msg: Error Code:200-0142Msg: Hard Drive 0 - self test unsuccessfulStatus:79"
Now when i try the same option [F12 - Boot option- Diagnostics]"Error code 0146Msg: Error Code:200-0146Msg: Hard Drive 0 - self test log contains previous error(s)What should I do to resolve this issue?
I have an old HP pavilion dv5 laptop wish won't start up, fan works power light on screen is on but blank with just curser dash top left corner, now I've took hard drive out and tryed starting in BIOS no joy took ram out and I get 3 bleeps when I turn on ....
My Dell Studio 1555 won't start anymore. When I want to turn it on, I get a beeping signal (2 beeps) and nothing happens. I tried all possible troubleshooting tips from the dell website (disconnecting all power and hold power button, reconnect to power, checked battery with the button on the battery, all fine, can't get into bios because computer doesn't start at all) but nothing works. Recently I also checked if the motherboard is connected properly and there is no issue either.
I also purchased a new dell adapter because my old one was a little bit damaged. The adapter is like the old one, and it's originally dell and the correct one for the studio 1555 so it can't be the adapter. Laptop also doesn't start when the battery is not in and it's only connected to the power.
i got a hp dv2000 and sometimes when i start it up and it gets to the user selection screen i cant find my cursor to select my user account. I keep moving my finger on the touch pad but cant find it. I have to hold the power button down it will shut off then i have to pull out the battery start it up and the cursor is now there this has happened like 5 times already what would cause this?
My Dell Studio 1558 cursor is either jumping erratically or freezing. I have had the laptop for a few years but this problem only started a couple of weeks ago and has been getting worse.
When it freezes, I need to re-start the computer.
The jumping happens not just when I am typing, but even when using the touch pad. It will move up and down and often close windows or click links.
I have checked and I have the most up to date device drivers. I have also changed the sensitivity settings but to no avail.
I have a Studio 1745 which refuses to boot up.The Laptop initialises and begins the BIOS Post processes and gets to about 66% through the BIOS load status bar and freezes. I am unable to get into BIOS setup or Diagnostics either. I have checked all connections and removed and refit the CMOS battery - no change to the problem.
I'm trying to load a new hard drive for my Dell Studio 1557 LT due to the original failed. I've worked on many PCs and LTs before and loaded software so I know the basics and then some. Problem is, when the LT boots from the OS from an external dvd drive -Win 7 64 when it attempts a write to the hard drive at the same point in the installation every time it blue screens then reboots. I cannot capture the blue screen info due to the immediate reboot. I have tried many utilities and other hard drives but the LT wont let me write to the hd to load an OS. I tried loading a hd from another pc then install it into this LT, same results blue screen then reboot. Very strange as if the LT wont allow a new hard drive or OS to be loaded. I've been trying to get this loaded for a week now and have tried everything. The hd was even DoD low level formatted too. Is there s Dell disk I need to get it started ?
On my Dell Studio 1735 laptop I have been running with Vista Ultimate x32 since I got it - yes - the <gasp> factory load! Everything worked flawlessly under that factory load. I decided yesterday to install Vista Ultimate x64 after having downloaded all drivers from Dell's website that I needed (made sure to download the x64 specific drivers). After installing, all drivers went in normally, but, the fingerprint reader (even though it's recognized in the control panel and services for it are running) doesn't give me the option of using it to logon to Windows or into any websites or anything else. I tried removing and reinstalling the drivers - no change. There is no GUI to enable/disable it that I can find. I've gone through the Program Files folder that it's installed into but nothing showing as an executable.
I bought yesterday the 640GB WD HDD and I tried to install it but Windows will not load. It will get stuk in the "loading screen" and will not advance to ask my password.
To complicate things, Windows actually loaded once, the driver setup programm was launched, the HDD was not visible and when I tried to restart it got stuck again.
Once I removed the drive everything loaded as usually.
I am booting a Dell Latitude E5420 running Windows 7 and after the POST it just shows a blinking cursor..... BUT WAIT... not ALL the time... it does manage to boot into the windows after I choose the HDD from F12 options or sometimes even when I keep on shutting down and starting up again and sometimes when I do a restore checkpoint in the repair options....
The Diagnostic tests are not working when I go through the F12 and just hangs up showing the message -
Examining ACPI interface Running MATS test
I can't understand... if it was consistently NOT booting or showing a consistent error... but here the behavior is erratic (except for the MATS test failure....
I have been trying to load a retail version of Windows 7 HP x64 using USB on my Windows Vista HP x86 Acer 1410. I am able to boot from USB and the Windows 7 install program starts. I select Custom Install to do a new installation (not an upgrade). After I select the partition to install to, I get an error message like "can't find a system drive to install to..." I have tried this on two different 1410's with the same results.
It was the particular USB SD Card Reader I was using. I don't have a 4GB USB drive so I was using a USB SD Card reader and an 8GB SD card. I switch to a different Card Reader (same 8GB SD card) and it worked first time!
I purchased a refurbished Dell e6410 about a year ago. The Laptop was working find with no issues. But in mid August, I did a windows 7 update... After the update, windows restarted... But instead of booting up to windows... It went to "startup repair". It ran this several times until is said it could not repair the startup.
I ended up having to do a recovery and reload windows and re-image my HD... After doing that, I tried windows update again. Same issue. after windows update... It would just got to startup repair.
Again, I had to restore my OS and re-image my drive. I tested and checked the HD and go no errors. Ran disk check and disk check /r... But if I tried to run a windows update it would just go into startup repair and I would eventually have to just reload my os and re-image the drive.
I spoke to an agent from Dell about it... He suggested I wait a month before trying to do the windows update. Perhaps they have a bug.
So I waited two months and tried an update again, last night. This time, I would get the dell logo, with f12 option, that would go away and then "windows is loading necessary files", but then the screen would go black and dell screen came up gain, then "windows is loading necessary files". I let it do this for almost an hour. Windows never started... I had no option to get into safe mode or any other boot modes. I have a regular desk top pc that I have done windows update and it has no issues.
I have talked to several HP techs since pc has been returned (after ruining the motherboard with water). The cursor freezes, so I hard power down (many times) and and restart - have been getting blue screen I did install Chrome browser as per one suggestion.
Shut it off one day and it wont load windows the next day. I get to the HP logo on start up and then the screen goes blank. After about 5 mins, the HP logo come back up again indicating the system is stuck in a restart loop. I cant get it to enter safe mode. I have removed the battery and held down the power button for up to 60 secs. No go. By hitting the escape button while the HP logo comes up, i was able to get to a limited menu where you can check memory and supposedly the hard drive. Ran through all that. No go. Removed CMOS battery for 5 minutes. No go. About the only thing i have not done yet is reseat the memory. I'll try that soon. From experience, am i looking at possibly a dead HD or is this sounding like a mobo issue?
After logging in I get stuck in a black screen with cursor. Have tried shift or control with f8 and f12 to get out of this with no success. Understand I may have to reinstall video driver or BIOS?
If I leave laptop on all day it is working by the time I get home from work.
I m using dell laptop since 2 years ,last week i try to update my pc with windows latest graphic update unfortunately after update the screen became blank with cursor blinking on it. Now I couldn't access my pc. Safe mode also not working,tried to get in through last known good configuration but it doesn't work.
when i turn on my Acer Aspire 3000 i put in my password then it makes me choose a windows xp as i have a dual boot but even if i choose either one it give me the message: "windows could not start because the following file is missing or corrupt <Windows root>system32hall.dll
I have got acer TravelMate P253-E. since last restart it is unable to load windows 8. whenever I start it says"preparing disk recovery" and after "do not turn off the device this might take more then hour" and goes on like this forever. I left it one whole night but was still the same.
I have a new Lenovo Z50-75 with FreeDOS - I made a Windows 8.1 installation, and all went fine.
After installing the around 70 updates - at one point it reboots and I get a black screen, right after shortly seeing the Lenovo Logo ( entering BIOS works ).
It is not booting Windows at all - I can not enter Safe Mode therefore, and I do not get any cursor.
The behaviour is reproduceable, done this 2 times. Also when it hangs in the black screen, the van get reall busy, lound and the notebook gets hot.
