Dell :: XPS M1710 Won't Load
Nov 11, 2009
I have an m1710 laptop. A few days ago when I wanted power it up it would start loading, but nothing would show on the monitor and the LED indicators near the media button would light up.
The first one from the left would stay on and next two would flash together while the last two are off. I tried hoilding down FN key when loading so I can load dell diagnostics but it won't do that. Tried to hookup an external monitor but that didn't help.
Tried powering up with the d key pressed in to run a graphics check but didn't work. Since the comnputer is no longer under waranty I took it apart and took out the Nvidia card and cleared the dust around it.
Right after that the computer loaded fine but today it got stuch while in windows and when I tried loading it I got the same err msgs with the LED indicators. I talked with Dell locally and they told me it's 99% the Nvidia card
View 7 Replies
ADVERTISEMENT
Dec 11, 2007
where to find a slot load DVD DL or Blue Ray drive for my m1710? I got a pioneer K06(?) for my 9300 and the bezel is too small for the hole and it sits too far back. Works great, but doesnt look so good.
View 9 Replies
View Related
Feb 21, 2008
I was going to be assembling an m1710 this weekend....
I called Dell Spare Parts a few days ago, and placed an order for the following;
HG345 Refurb bottom plastics, m1710
FF084 Refurb palmrest assy, m1710
J8841 Refurb speakers, LED, m1710
CF426 Refurb hinge cover, m1710
I've been watching the order on Dell's site all week, as it was scheduled to ship (on or before today) (2/21/08), and I opted for Next Day shipping.
When I placed the order, the woman I spoke with asked for my Service Tag number. I, um... don't HAVE one... I didn't say this, I simply said I don't have that information at the moment. She asked how I got the part numbers, and I told her from their own Spare Parts page.
Well....the order got cancelled today. Saw it online while at work, just before I left for the day. Another order number with the identical items was created, with a scheduled ship date of 3/3/08. WHAT?
The woman just called....she states they cannot process my order without a service tag number. YOU HAVE GOT TO BE KIDDING ME!
I told her I don't have a tag number....she asked if I was building one. "Yes." To which I hear...
"Oh....well, I don't think our supplier will allow that without a service tag number, because we reserve those parts for people who bought m1710's."
I said "That's amazing...because I know a number of people who have done the same thing I'm trying to do, and had no problems getting these parts."
"Well, that's because they have m1710's"
*mad enought to scream at this point* "Um, no...where do you think I got the idea from?? I'm certainly not the first person to have this idea."
how I can get them to sell me some refurbished plastics? What's the secret password?
View 15 Replies
View Related
Sep 22, 2007
Just installed a T7600 in my E1705, and full-load temps are 74C. I don't remember what me T7200 ran at.
View 15 Replies
View Related
Jul 26, 2009
This is on a vostro 1400 with the notorious 8400M. Recently, whenever I run a game (any game, even older ones like WC3) or anything graphics-intensive such as movies, the cpu load increases until it hits 100% and the system basically freezes until I exit whatever program was running.
For the first 5-10 of a game, everything runs smoothly, but eventually the cpu load maxes and I have to quit. the sound is also messed up, which i think is just an effect of the cpu load.
View 4 Replies
View Related
Dec 8, 2008
where to buy a 6x slot load blu-ray player to up grade my dell studio 17 notebook
View 10 Replies
View Related
Mar 21, 2010
I bought yesterday the 640GB WD HDD and I tried to install it but Windows will not load. It will get stuk in the "loading screen" and will not advance to ask my password.
To complicate things, Windows actually loaded once, the driver setup programm was launched, the HDD was not visible and when I tried to restart it got stuck again.
Once I removed the drive everything loaded as usually.
View 6 Replies
View Related
Jul 9, 2009
I just got the xps 1640 today and I'm very distracted by the loud system fan. It's audible all the time even when the computer is idle. I haven't been doing anything intensive on my computer either. The fan starts as soon as windows loads and never stops. I know this laptop has heat issues but I checked the core temp and it is only between 38-45degrees C. I know the fan can get louder under load, this is what I would describe as idle but still, it seems way too loud. It was raining earlier and I could hear the fan over the sound of raindrops hitting my roof. It's getting unbearable!!
Has anyone had the same experience? Or more importantly does anyone have a way to reduce the speed of the fan slighty? Speedfan doesn't seem to support my motherboard so I can't do it there.
System:
P8600 2.4ghz
4gb ram
320GB (7,200rpm) WD HD
View 10 Replies
View Related
Jul 23, 2007
I8200 with orginal 40GB hitachi HD DK23EB-40. So I left the notebook run overnight (nothing new) has cooling pad and another fan sitting on the side running air over it. When I came to in in the morning it was locked so I rebooted. I got an error message and it doesn't want to boot. It does boot with another HD I have so the HD is the problem. I previously had a problem with another used HD that had a problem like this on another laptop and had someone i know work on it. To me it looked like he made a partition and placed the whole corupted OS with files inside of a fresh os install. I don't want to try and do a repair with the reinstall CD. Tried that once and didn't work so I don't want to to take a chance. Anyone know what he might have done? I have partition magic 8 if this is what's needed, but how to do this?
View 12 Replies
View Related
Oct 23, 2009
After a month of using my laptop, today is actually the first day I'm trying out this slot load drive.
I inserted a CD given by my instructor, it was running really slow and some cranky / buzzing noise could be heard from it. I mean is it normal ? It loads kinda slow too.?
View 7 Replies
View Related
Feb 27, 2009
Everything was working fine until lately I noticed that during the BIOS the loading bar stops 4/5 of the way for around 10 seconds,
then I hear the slot load drive turn on and only then my computer boots up .....
View 4 Replies
View Related
May 28, 2009
Looking at getting one of these... what are the temps under load and idle of this laptop (of the cpu and the gpu)?
View 10 Replies
View Related
Jul 22, 2009
Would there be any lag on video playback on the 8X Slot-Load Blu-Ray Reader versus the 4X Slot-Load Blu-Ray Reader/Writer for the Dell Studio XPS 1640?
View 10 Replies
View Related
Mar 6, 2009
I have been having some problems with my slot-load drive (TEAC DVW-28SLC). It has been coastering a lot of DVD-DL disks lately and overall it is very slow. I have been reading that they are putting faster drives in the newer M1530's. After a long battle with XPS support, I convinced them to replace the drive. Do you think I will get one of the faster drives or will I be stuck with the same drive? I really don't use it all that much, but when I do want to use it, it is a major pain, especially when it coasters expensive DL-DVD's.
View 10 Replies
View Related
Apr 1, 2010
So I just got my new 1647 replacement set up finally and one thing I keep running into is an INCREDIBLY long black load screen between the windows 7 animation thingy and when you actually log in..
Even the windows 7 animation takes longer to load than normal...Than I get a black screen for a good 2 minutes before my mouse then shows up then about another 30 secs I get the login finally...
Whats going on? I have my old 1640 side by side and it boots instantly!
View 8 Replies
View Related
Nov 2, 2014
I am still not able to use my laptop as the thing won't or can't load user profile, all I get is the message user profile service failed the logon. I ran the F12 at start up and performed the extended diagnostic test which tells me everything is just peachy.
View 3 Replies
View Related
Apr 24, 2013
When I open the lid to the laptop and hit the power button, the 3 buttons on the top of the keyboard cycle through and the power comes on, but the only thing that happens next is the screen turns on with a slight brightness, but it doesn't load any further. It doesn't even load to the Dell logo. If I tap the power button again, all lights and monitor goes off with a beep noise.
I have taken the battery out, unplugged the power cord and held the power button for over 15 seconds. This did not do anything.
View 3 Replies
View Related
Mar 10, 2013
My Studio 1558 passes' the post test with the Dell logo and black bar underneath. Windows 7 does not load but the cursor appears in the upper left hand corner of the monitor. I can't log into safe mode or do anything with the computer.
View 1 Replies
View Related
Jan 18, 2010
I was cleaning my computer and got it back together and had one of the HDD's die. I replaced it with a differany HDD, reformatted and installed the OS (Vista) but when I start it up the BIOS gets about 80% loaded and then next 20 takes 2-3 min. to load. It used to be much faster, within a matter of seconds. I tried reflashing the BIOS but that didn't change anything. Anyone have suggestions? Computer is the Inspiron 1720 in my sig.
View 8 Replies
View Related
Feb 7, 2009
i ran a load test on my vostro 1500 and came up with these temps at 100% load on the cpu.
cpu 1 was 44c
cpu 2 was 47c
gpu was 36c
are these good numbers?
View 10 Replies
View Related
Apr 25, 2009
for some reason my hd would take forever to load and made clicking noises.
but then it goes away after a couple boots that take forever to boot..
now it acts all fine boots fine and everything..
m1730..
View 3 Replies
View Related
Jun 26, 2009
Does anyone have any information or updated drivers for this drive. The only Blueray drive listed on Dells driver page is the BC-5600S.
The laptop is only 2 months old. Is this a newer drive or is the 5600 the replacement.
I am not happy with the performance of the drive so far, blueray movies sometimes stop while it searches the disk, and I am yet to successfully burn a Dual-layer disk (verbatim).
View 3 Replies
View Related
Jan 10, 2010
after reading [url]i just wonder if there is any dell i7 laptop with i7-920xm cpu, working under 100% cpu for over 6 hours a day, with no throttling issue, no over heat issue(max cpu temperature under 85C in 25C room), no overloud fan noise issue(fan noise no more than 40db)?
View 10 Replies
View Related
Dec 10, 2009
It would really be neat if I could put in a slot load Blue-ray drive or burner in my 1340, would the one in the 1640/1645 be Compatible and if so .
View 4 Replies
View Related
Jun 27, 2009
I was browsing the web when my Optiarc DVD drive on my 1536 made a very loud screeching noise.
It sounded similar to someone scraping a knife on a plate really hard, repeatedly, then followed by a softer scraping and then it stopped.
View 10 Replies
View Related
Dec 20, 2014
I power on the laptop and it immediately goes to a windows is loading files screen. After it is completed it freezes for a moment before loading the blue screen where the desktop icons would normally load. Except they don't. It freezes on the blue background screen. The warranty is up and I have valuable pictures etc.. On this computer from trips and whatnot.
View 3 Replies
View Related
Nov 19, 2013
I'm a proud user of an M4800, but the constant fan noise bothers me a lot. I ordered it wit win7 but almost directly switched to win 8.1.
What I already discovered: In the event viewer I experienced a lot of MSI error events (every 11 seconds) .
Event filter with query "SELECT * FROM __InstanceOperationEvent WITHIN 10 WHERE (TargetInstance ISA 'Msvm_ExternalEthernetPort') OR (TargetInstance ISA 'Msvm_VmLANEndpoint') OR (TargetInstance ISA 'Msvm_SyntheticEthernetPort') OR (TargetInstance ISA 'Msvm_ComputerSystem') OR (TargetInstance ISA 'Msvm_VLANEndpointSettingData')" could not be reactivated in namespace "//./root/virtualization" because of error 0x80041010.
Events cannot be delivered through this filter until the problem is corrected. If I stop the Intel(R) PROSet Monitoring Service these events stop, but I wonder if the performance of network devices is not affected negatively:
The Intel(R) PROSet Monitoring Service actively monitors changes to the system and updates affected network devices to keep them running in optimal condition. Stopping this service may negatively affect the performance of the network devices on the system.
Nevertheless after this action CPU usage has dropped, but still too much fan noise while the system does nothing ;o(
I contacted support and they adviced me to reinstall with win7, but that is no option for me for the moment.
My power options are set to 'Quiet (Reduced Fan Levels)'
In the BIOS vA03 I could not find an option to lower settings there. and all latest drivers are downloaded and installed.
View 15 Replies
View Related
Aug 11, 2009
My PC worked fine for the first few days and then all of a sudden about 1/2 the time I would try booting up I would get past the BIOS post screen and then would only see a blinking underscore cursor in the upper left and it wouldn't load Windows at all.
I've reinstalled Vista SP2 clean, tried a clean install of Win7 RTM (fully legal) and then Vista SP2 clean - all with the same result of 50% or thereabouts the PC not getting past the blinking cursor undersco
View 4 Replies
View Related
Feb 4, 2013
I have a Studio 1745 which refuses to boot up.The Laptop initialises and begins the BIOS Post processes and gets to about 66% through the BIOS load status bar and freezes. I am unable to get into BIOS setup or Diagnostics either. I have checked all connections and removed and refit the CMOS battery - no change to the problem.
View 5 Replies
View Related
Jan 4, 2015
I replaced the hard drive on my inspiron 1545 and tried to restore it with the dell data safe disks that I made when I got the machine. Windows 7 loaded but I couldn't do anything with it, It was very slow, I couldn't even get it to update. So I loaded in the windows 7 disk that came with it and now I have windows up and running and updated. My question is what drivers do I need to install. I went to dell/support and entered my service tag number and it came up with a list of drivers (46 of them), some I know I need but others seem to be for things I don't know if I have on the computer. How do I know which ones I need?
Also I read something about a file called Dell System Software but its not on the drivers list. Do I need it or not?
View 4 Replies
View Related
