I am still not able to use my laptop as the thing won't or can't load user profile, all I get is the message user profile service failed the logon. I ran the F12 at start up and performed the extended diagnostic test which tells me everything is just peachy.
On starting up my laptop HP Pavilion G6 an error is occouring " The User Profile Serivce service failed the logon. User profile cannot be loaded."What is the problem? And what I have to do?
My notebook Model is dv4-2020ca, Product : VM299UA#ABC is operating by Windows 7.
I never change my passwords since I set up this notebook. Yesterday, when I logon to the notebook, the screen showed a message that my passwords not match.
Since I never changed my passwords, I tried to logon a couple of times. The screen then showed another message . It says the user Profile Service failed the logon. User profile cannot be loaded....
I can't log on to my laptop.messages always pops up THE USER PROFILE SERVICE SERVICE FAILED THE LOG ON and on the bottom it says USER PROFILE CANNOT BE LOADED.
I have tried to get into my laptop model:dv6-1310ei Prod no:vs080ea#acq,serial no:cn94769wf,pavilion dv6,,after typing my password,the result I get is "user profile service failed to login,user profile cannot be loaded....
My laptop logged me off while using it and I tried log back on but I keep getting this message "user profile service failed the log on , user profile cannot be loaded." But it lets me in as a guest but cannnot let me in as an administrator. I'm 100% certain my password is correct.
I am having difficulty booting Windows 8 on my HP Envy 4 Ultrabook. Firstly when I try to login to Windows using my Windows 8 password it says "The User Profile Service service failed the sign-in. User profile cannot be loaded".
Then following advice from other online support forums including this one, on restarting the computer then pressing F8 repeatedly I get the following message: "Boot device not found. Please install an OS on your hard disk. Hard disk (3F0).
I have an acre aspire 5535. I cannot login and keep going round in circles with the message which says "the user profile service failed to login. User profile cannot be loaded". I have switched off and opened again but no change.
I returned from a 2 week holiday to find that I could not logon to my laptop. During the time I was away the laptop was powered down. When I enter the correct password to logon I get: "The User Profile Service service failed the logon. User profile cannot be loaded." message. I tried powering the laptop for 3 hours then tried to logon again but without success. How do I get around this?
i got a hp dv2000 and sometimes when i start it up and it gets to the user selection screen i cant find my cursor to select my user account. I keep moving my finger on the touch pad but cant find it. I have to hold the power button down it will shut off then i have to pull out the battery start it up and the cursor is now there this has happened like 5 times already what would cause this?
I have an Inspiron 1501 - it's old but it woks great.. I tried updating the BIOS following the instructions on the Dell site. I repeatedly get the Winphlash User Interface has stopped working. What is the proper technique to do this BIOS update without errors? I don't get any instructions on line - only a DOS type window then it disappears.
Also on the Dell site re Drivers, It finds my Service Tag and then I get the message that my operating system Windows Vista Home Basic is not available on the machine --but it was bought from DELL with this OS?
I power on the laptop and it immediately goes to a windows is loading files screen. After it is completed it freezes for a moment before loading the blue screen where the desktop icons would normally load. Except they don't. It freezes on the blue background screen. The warranty is up and I have valuable pictures etc.. On this computer from trips and whatnot.
I replaced the hard drive on my inspiron 1545 and tried to restore it with the dell data safe disks that I made when I got the machine. Windows 7 loaded but I couldn't do anything with it, It was very slow, I couldn't even get it to update. So I loaded in the windows 7 disk that came with it and now I have windows up and running and updated. My question is what drivers do I need to install. I went to dell/support and entered my service tag number and it came up with a list of drivers (46 of them), some I know I need but others seem to be for things I don't know if I have on the computer. How do I know which ones I need?
Also I read something about a file called Dell System Software but its not on the drivers list. Do I need it or not?
Dell Inspiron 1520, When you turn the laptop on, the BIOS load screen comes up and when the progress bar starts to scroll, it gets about 1/2" over and then the screen goes black. It is not the inverter, because if you take a flashlight, you can not see anything. The Cap Locks and Num Lock button will toggle the LEDs, but there doesn't seem like anything else is going on. I have tried hitting F2 on boot, as well as FCN +D and no luck. It is running A04 for the BIOS. I have also reseated the RAM and the display cable connectors. I have also plugged in a keyboard and monitor to see if that would change anything and it didn't. (I did hit the FCN+F8 after plugging in the monitor.)
My laptop is dell inspirion 5520 with core i5, 8GB memory and amd radeon HD 7670M. When i bought adm radeon switchable graphic works ok. Yesterday, I update the graphic driver. version is 8.933.3.4 from dell website.
Previous version is 8.933.3.0.
After updating, catalyst control center can't load. So, I roll back previous driver version but the catalyst control center can't load.
I have a Inspirion N5050 laptop. A few weeks ago, it started running slow and Adchoices ads appeared. I removed them. I ran a scan using AVG, which detected nothing. I shut down the laptop as a precaution. Now it will not load Windows. I press the power button, the dell logo appears, then I hear what I think is the hard drive click, then the screen goes dark for a second, then the logo and a click and so on and so on. I am able to get to the menus with f2 and f12, what to do next. Safe mode will not respond ( I cannot get into it).
I bought a Dell Inspiron 15r 3537 five or so months ago. I haven't had many problems with it but just today, I have run into a few issues, wont load up, the power light flashes for a split second then nothing which seemed to resolve it's self after I ran a systems diagnostics (which everything was running fine and I received no error codes). I left it alone for a few hours and then when I started it back it up....nothing. It isn't taking charge though the charger is still showing a green light on it. I've taken the battery out and held down the button for 15-30-45 seconds all with no result.
I had to reinstall windows because of a virus. Windows 7 Home Premium
I am unable to load the audio and card reader drivers. I've ran all the windows updates and use Dell's support for finding the correct drivers. The system analysis identifies the drivers I need, but they refuse to load.
My husband came home from work saying his laptop doesn't work, being the naturally skeptical wife, I tried to boot it up, thinking I'll f10 (Well, f12 - turns out) the problem away. If that worked, we wouldn't be here. Anyway. 9_9
The laptop turns on without a problem, and presents me with the Dell loading screen. The loading bar is present, but nothing is actually 'loading'. There are two options in the lower right hand corner, "F2 - Setup" and "F12 Boot Options". If I turn the laptop on and press one of these buttons really quick (within a second), then that option will be highlighted, but nothing more occurs. I've tried this for both F2 and F12.
I've tried:
-Boot Options - fails to load the options screen -Setup - fails to load the setup screen -Turning the power off and holding the button down. -PSA ... Pre-startup Analytics...? Didn't work. Spent 5 minutes tapping F12 once a second. -All of the above with and without the AC adapter in. -Taking the battery out (Oi, that was fun.) and plugging it back in.
Has anyone successfully calibrated the RGB LED screen on the M6400 Covet using a colorimeter?
I have a Pantone Huey Pro and I'm getting really bad results after calibration (washed out colors, greenish cast). After about 2 months of back and forth with Pantone they have told me that "maybe" my colorimeter doesn't have enough range for a screen with such a wide gamut.
The "maybe" part, which suggests they don't even know their own product, is what I find unbelievable
Why can"t I get the Dell Webcam Central to load on my inspiron 1545? I have downloaded it twice from the support site for my service tag and each time i attempt t install it and it shows a coorupt or incomplete download
someone would have developed an ICC color profile for the AW model that uses the X-Brite Technology Screen. I have the cheaper LCD version and not the high dollar RGB Professional model screen.
I have a Compag Presario CQ57 with windows7, "it said that the profile couldn't be loaded," so the question is how do I get in my computer to open it up to work on this problem or resolve it or how do I over ride the guest side so that I can get in on that side I forgot the password I set up on that side. how to get into the other user side I forgot the login password for this guest side I set up.
I have a Lenovo G480(Model 20156). My CPU is Intel Core i3 2370M. I have recently added another 1600 MHz RAM. But it is now showing 1333 MHz. I am using windows 8.1. Though I saw that some laptops can enable that by selecting XMP Profile on BIOS. But, my PCs Bios is not showing any option to select XMP profile or even any Advanced AI option.
My question is,
1. How can I resolve this problem and get my 1600 MHz RAM work fully? 2. How can I enable the XMP profile to get the full advantage of my 1600 MHz RAM?
I posted a message here yesterday looking for FatTire cause I would like to discuss sealing my boards against moisture and installing some cooling plates.
The reactionary admins erased my message before it could be recieved, so hopefully this time the message will remain untill I can get in contact with Fat Tire and discuss how to mod my laptop.
I am posting in this forum because FatTire was in on a discussion in THIS forum that exactly matches what I am attempting to do now in another forum. So even though I am chatting about this in the Alienware forum,
(as I am working on an Alienware laptop mod), I am CROSSSPOSTING here in an attempt to contact an expert who has not done this mod on an Alienware laptop before to my knowledge.