Dell Precision M4800 :: Doesn't Start After Ram Upgrade
Jan 2, 2015
I recently ordered Mushkin Enhanced Blackline 16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model 997067 - Newegg.com to upgrade ram on DELL M4800. When installed it doesn't let the Laptop to boot. Newegg says this is compatible but the product doesn't.I'm sure I installed it properly. By any chance,did I receive a defective product ? or is the product incompatible unlike Newegg's Memory finder suggestion ? Newegg charges $15 restocking fee, so I would like to make sure i'm not doing something wrong before before returning it.
View 5 Replies
ADVERTISEMENT
Nov 15, 2014
I bought an RFB Dell Precision M4800 .... When I used my laptop in the ark. My keyboard hadn't been enlighten.
I tried follow some suggestion as: install Dell Feature Enhancement Pack v2.2.1
But I didn't find "Dell Keyboard Backlight Settings" on control panel as guidance.
View 2 Replies
View Related
Jan 7, 2015
i Bought a dell precision m4800 it came it windows 8 i updated it and now my wifi switch is not working it does'nt turmn off and now i can't turn the bluetooth on as well, it says that you need to turn on the wireless hardware but it is already on
View 1 Replies
View Related
Jan 4, 2015
I have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
View 2 Replies
View Related
Nov 30, 2013
Having a strange issue with the Touchpad on my Dell Precision M4800. When I disable it using the Dell software or using the Fn+F5 hotkey, it has a tendency to come back on after a random interval of time. I want it to stay turned off permanently, as I prefer to use the Pointstick exclusively.When using the Fn hotkey, I get a notification onscreen as well as a popup in the system tray saying "Touchpad notification: Your touchpad has been disabled." If I manually disable it through the Dell Pointing Devices software, I get the same effect, but without the notification. In either case, this works great... for awhile.But then the Touchpad inevitably turns back on. I often don't notice until suddenly my mouse cursor is behaving erratically, at which point I try to swipe my finger on the touchpad and sure enough, it's become enabled again.
However after some further experimenting it turns out the "random" aspect of this is not totally random and I can reproduce the issue quite reliably by furiously scanning my finger back and forth across the Touchpad for a few seconds. Inevitably, the touchpad will turn back on, and I will get the notification "Your touchpad has been enabled." No buttons or hotkeys are pressed, all I have to do is move my finger on the touchpad surface rapidly and within seconds of starting to do that, it will re-enable itself. Again, there is also a notification that it has been re-enabled when this happens, so the software is detecting my finger movements somehow, perhaps I am accidentally performing some "magic gesture" that compels it to re-enable the touchpad.
If I don't intentionally try to cause this, it still turns on eventually, but can take a long time, half an hour or more before it becomes enabled again. I assume it's the activity of my palms resting on it that will accidentally turn it on again in the same way as swiping my finger intentionally across the disabled touchpad. It makes no difference whether the Dell Pointing Device software is open or closed and this will happen when any application is open.
All I want is for the touchpad to be truly disabled permanently and not accidentally turn on in the middle of my work. But at the same time I'd prefer to leave the pointing stick enabled, so I can't simply remove the driver. So far I've been using an external mouse and disabling all internal pointing devices, which works ok, but like I said I am fond of the pointing stick, I'd prefer to be able to leave it on with JUST the touchpad disabled.
System specs: Dell Precision M4800 with qHD screen
CPU: Core i7 4800MQ @ 2.70Ghz
Graphics: nVidia Quadro K2100M
OS: Factory-installed Windows 7 Pro 64-bit
Dell Pointing Devices software version v.8.1200.101.134
View 12 Replies
View Related
Dec 16, 2013
This laptop isn't even one month old.. this is sincerely frustrating as i have alot of important work saved on here...
-When I plug in the charger.. the battery light turns on for a second then the battery light turns back off.
-When I try to turn on the laptop with the charger plugged in.. nothing happens at all. When I try to turn on the laptop with just the battery without being plugged in.. the power button will light up for a second then go back off.
I've tried: taking out the battery and holding down the power light for 1 minute.. waited 30 seconds tried turning it on with the power chord with no prevail. holding Fn and turning it on and nothing
Some signs I've been seeing: only bad signs i've seen was before it just didn't boot anymore.. maybe twice out of the 6 last time i've booted.. as soon as i typed my password to get into windows it would just shut off. i'd jus reboot and it worked fine. when it stopped turning on.. after messing with plugging it in or not (i didn't know if the battery was dead) i was able to make it past the windows sign on screen.. was going to email myself all my work before it suddenly shut off on me again. the battery had maybe 1/3rd life before it died
I might have interchanged battery chargers with another older dell model laptop.. but i think only a few times at most.. it mostly sits at work on a docking station at work. i have a feeling i never did though. from what i've read it seems like the battery chargers are all compatible as long as it's dell.
View 3 Replies
View Related
Nov 19, 2013
I'm a proud user of an M4800, but the constant fan noise bothers me a lot. I ordered it wit win7 but almost directly switched to win 8.1.
What I already discovered: In the event viewer I experienced a lot of MSI error events (every 11 seconds) .
Event filter with query "SELECT * FROM __InstanceOperationEvent WITHIN 10 WHERE (TargetInstance ISA 'Msvm_ExternalEthernetPort') OR (TargetInstance ISA 'Msvm_VmLANEndpoint') OR (TargetInstance ISA 'Msvm_SyntheticEthernetPort') OR (TargetInstance ISA 'Msvm_ComputerSystem') OR (TargetInstance ISA 'Msvm_VLANEndpointSettingData')" could not be reactivated in namespace "//./root/virtualization" because of error 0x80041010.
Events cannot be delivered through this filter until the problem is corrected. If I stop the Intel(R) PROSet Monitoring Service these events stop, but I wonder if the performance of network devices is not affected negatively:
The Intel(R) PROSet Monitoring Service actively monitors changes to the system and updates affected network devices to keep them running in optimal condition. Stopping this service may negatively affect the performance of the network devices on the system.
Nevertheless after this action CPU usage has dropped, but still too much fan noise while the system does nothing ;o(
I contacted support and they adviced me to reinstall with win7, but that is no option for me for the moment.
My power options are set to 'Quiet (Reduced Fan Levels)'
In the BIOS vA03 I could not find an option to lower settings there. and all latest drivers are downloaded and installed.
View 15 Replies
View Related
Dec 31, 2014
I have a Precision M4800 that has its USB ports stop working in two cases so far. First, if I use the card reader at all, it works to access files, but then when I try to eject the card, it shows neither an error nor the "safe to remove" message. the card stays in the list of drives even after it's unplugged. If another USB drive is plugged in after this, it isn't recognized.
The second case is after using an external USB 3.0 drive for a while, it can stop working. The drive shows up in the list of drives, but all the directories appear empty. Unplugging doesn't remove the drive, and new drives aren't recognized. Once this happens, shutting down the machine crashes after a few minutes with DRIVER_POWER_STATE_FAILURE in either USBSTOR.sys or O2FJ2w7x64.sys. Could this be a hardware problem? It seems like the USB controller is locking up and the other drivers are getting blamed.
View 3 Replies
View Related
Sep 15, 2014
I recently re installed my Dell Precision M4800 laptop. In the device manager there is a driver not installed " Broadcom USH" I already searched for it, and there is one : Dell ControlPoint Security Device Driver Pack, but this device is not (yet) supported. Is there a way to fix this? I did not get any recovery cd with my pc, only a few drivers, not this one.
View 3 Replies
View Related
Nov 18, 2014
Brand New M4800 with docking station - I have ordered two new (large) monitors.In the meantime I have two old squarish VGA monitors. Because I cannot get these set up right.
On a desktop PC, I have good resolution on these old monitors - one connected via VGA-VGA cable plugged into DVI adaptor, the other connected via VGA-DisplayPort.I tried to copy this on the new laptop - I plug in one monitor using the VGA -VGA to the VGA on the back of the laptop or docking station: result is laptop display plus VGA on terrible resolution that I cannot seem to change!
Second monitor - VGA -VGA lead, but nowhere to plug in, so I got the VGA-DisplayPort adaptor and tried plugging it into the laptop's DisplayPort socket (not on docking station) - it "sees" it, but then, in display settings software, it crashes.
WHAT I NEED:
(a) Laptop lid closed, two VGA monitors at decent resolution - OR -
(b) 3 monitors: laptop display plus two TGA monitors at decent resolution.
View 1 Replies
View Related
Nov 18, 2014
I own a Dell Precision M4800 Workstation running Windows 8.1 64-bit and the problem is that when I type text, no matter where (address bar, Office, iTunes, etc), and go to move my cursor immediately after, it takes about 3-4 seconds of me swiping on the touchpad to get it to move.
View 2 Replies
View Related
May 3, 2014
I have a Dell Precision M4800 laptop with windows 7 64bit. The backlight keyboard goes off if there is no activity for 10 seconds. I'm wondering if there is a way to change this so that it stays on even if there is no typing? (I have no option to change this in the Windows Mobility Center).
View 4 Replies
View Related
Sep 19, 2014
I recently updated my Dell m4800 to BIOS A8 with Windows 7 64. I had been using a collection of older power adapters from my previous Dell m4400 without any issues. After the update, wow. A huge performance hit if I do not have the 19.5 volt and 9.23 amp adapter connected.
The m4400 power adapter is 19.5 volt and 6.7 amp. Pretty close right? Not any more.
I do have it connected to a Dell docking station almost all the time. Just checked. They are both 6.7 amp.
What changed in BIOS A8 and what the deal is with the performance? Looks like I need to request a new docking station, but I'm not sure IT will believe my story.
View 3 Replies
View Related
May 23, 2009
My friend's macbook (white plastic, 2.0, napa/core2 before santa rosa platform) isn't starting, and I have no idea why. He initially asked me to replace the top and bottom casing. I accepted, and ordered the parts. Around the time they were supposed to come, I took the computer apart completely (required for the repair), but one of the parts was delayed, so the computer sat splayed on my desk for a week. I didn't exactly stack textbooks on it, but it also wasn't covered in anti-static wrap. So, now, I finally got the part and put it back together, and the computer doesn't start. At all. The screen doesn't go grey, the 'sleep' light doesn't turn on, the fan doesn't start - nothing. The magsafe light is green, so the power is going in. It's also worth noting that I have no battery for it, so it's all on A/C.
Does anyone know what's wrong? My two hypothetical solutions are (a) I need a battery, or (b) the logic board is dead due to static.
How likely are each of these scenarios - especially the logic board one? How possible is it that it was static overloaded?
View 10 Replies
View Related
Nov 1, 2013
I bought precision m6700 and WM713 wireless mouse.I turned on my mouse, connected to my precision by usb which came with mouse, and it paired with my computer, device and printers shows there is WM713 wireless touchmouse. But after these steps my mouse didnt work. Mouse was turned on but doesnt track my pointer or click every role of mouse. Im using windows 7 64 bit. And when i go toWM713 wireless touch mouse application, There was battery level section but it says not connected, but i already connected my mouse by usb to my precision.
View 6 Replies
View Related
Feb 17, 2013
I have a very confusing issue with my Dell Inspiron N5110 Core i5 laptop. Sometimes when I try to switch it on, it doesn't do anything at all. I tried to talk the battery and the AC adapter out, press and hold the power button for 30 seconds, put the battery and the AC adapter back in but nothing at all happens. No lights are showing up at all on it even when i'm having the AC adapter however i am sure that the adapter is fine.
What confuses me that when i leave it for a day or two and try again, it just works fine. It is about 7 months old and it came up with Windows 7 home edition on it.
View 1 Replies
View Related
Mar 16, 2013
My Inspiron N5040 doesn't start at all. Looks like hard drive has crashed. My service tag is 9XS8LT1.
View 1 Replies
View Related
Feb 19, 2013
I've got my Dell Inspiron n5040 for almost 14 months, on which I upgraded to Windows 8, and now it doesn't start anymore. It tried to start in repair mode, but then it just shows a black screen, which doesn't change.
After running diagnostics I've gotten error info:
Error Code 2000-0142Validation 63358Msg: Hard Drive 0 - S/N WD-WX51A8109114, self test unsuccesful. Status = 7.
View 1 Replies
View Related
Mar 20, 2014
So, my y510p is having really anoying problem.
Sometimes computer works fine (really rarely) but usually it just doesnt start.
I need to press powerbutton atleast 50 times until it finally start, and when it starts the screen is just blinking black and keys are blinking too, the problem becoming more general when it gets "cold" (Cold = normal indoor temperature 22 celsius) it also takes ages to get windows screen
I have already visited warranty with my laptop and it was there 1.5 months, and they changed keyboard (why?!?!) and send it back, they said that they run some tests without any problems. Then i got my computer back, NOTHING CHANGED, same problems and all, what should i do?!
I have already soft-reseted, reseted bios and reseted whole system, nothing works!
My model is the one with 750M and 24gb ssd cache.
View 6 Replies
View Related
Oct 13, 2014
I just bought a brand new Acer R7-572-6805. When I press power button nothing happens if AC adapter is not plugged in. I would expect laptop to start/boot because the battery inside is brand new and fully charged.
Also, I'm worried that nothing happens when I press for 4-10 seconds a battery-reset button on the bottom of the laptop in a small hole in the middle (I use paperclip).
1. Update BIOS to the newest version 2.04. Note: during flashing new BIOS version the orange LED didn't blink but shined!
2. Tightened all screws on a casing.
3. Replaced a charger.
4. Pressed batter-reset button.
5. Pressed power button for more than 10 seconds while AC adapter was plugged in, was not plugged in and when battery was not plugged in too.
4. Reinserted battery many times.
5. Checked voltage of a battery. Two cells showed 3.11V and the other two cells showed 3.81V. I manually charged the first 2 to 3.78 so that all 4 cells have similar voltage. The proper voltage makes me think that the battery is fully charged.
Other observations:
1. When AC adapter is plugged in then the orange LED is blinking (it seems to indicate that the battery is low) after approximately 6 seconds from pressing power button, i.e. from start. It doesn't change if I go to BIOS or go on with Windows boot.
2. When battery detached then the orange LED does not shine at all.
3. When AC adapter is plugged in then laptop starts.
4. Windows 8.1 is installed. The first time I used the laptop I plugged AC adapter in, powered on the laptop and went on with the installation.
5. Wall AC outlet provide 230V in my country (in contrast to 110V in US, but it shouldn't matter becuase the charger is capable of working in both systems according to its specification).
View 7 Replies
View Related
Oct 11, 2014
I've noticed that my laptop doesn't start at first power on. A push the start button, Lenovo image is showing but after few second the power go off. I need to push again the power button and then the laptop start without problem.
View 7 Replies
View Related
Apr 28, 2010
Yesterday my brand-new VPCZ11X5E completed an automatic windows update, and shut down after completing the installation procedure. Since then windows will not start up properly: it stays in the start up phase (you know, with the windows 7 logo), before the log-on screen.
or should i just do a re-install (=losing some important documents).
View 3 Replies
View Related
Jul 31, 2014
ive had my computer for years(warranty has expired) and it has worked very fine except it has been always very prone to overheat. A week ago it overheated(again), and after that it hasnt started anymore. I press the power button, i see caps light once or twice(yes indeed, when starting it might show once and then next time twice and so on..). startup goes like this: first there will come normally that screen where reads "press ESC to startup menu", hten screen goes black and it should open windows but it doesnt. Instead it makes an restart and does that all the time. Ive ran all diagnostics and those are just saying passed to everything. I have also tried "hard reset" but that has no effect. Also F11 in startup(system recovery) doesnt work.
View 2 Replies
View Related
Feb 9, 2013
I should have left it alone but I've never had a bios go corrupt during update. Had A03 BIOS and attempted to update to A09.
Laptop locked up during the flash and now it doesn't even show the bios start up! I removed the BIOS battery and LT battery. Maybe I need to wait longer then 5 mins for the entire system to discharge and then try power up again. So far just a black screen!
I just got one problem fixed with loading a new hard drive now this.
View 2 Replies
View Related
Sep 5, 2014
I turned on my laptop and walked away for 10 - 15 minutes. I then returned to find that my laptop had not started up properly, and had instead come up with a black screen displaying "Checking disk for errors. This might take over an hour." So I left it sitting there turned on and plugged in for around 5 hours, and the message stayed on the screen. I have tried re-installing Windows 8 via hard drive and disk, and it was not able to be loaded. I have also tried hard resetting my laptop, to which the same message appeared after I turned it on again.
View 5 Replies
View Related
Sep 11, 2014
My T420 doesn't power on at all. I have tried to turn it on with cable, w/o cable, different baterries, removed rams and tried same things, tried holding down power button for 60 secs, tried with an other keyboard and I couldn't manage to start the laptop. No reaction at all, no blinking or anything.
View 4 Replies
View Related
Sep 13, 2014
I've Probook 4540s notebook , I tried installing watchdogs , after restarting windows doesn't start up correctly , a black screen with blinkin cursor and wifi Icon. I'm using safe mode now :/
View 5 Replies
View Related
Oct 25, 2014
I bought a new Aspire V3-472P-5706
I wanted to create some recovery drives etc. so I clicked on the recovery management program
It asks if I want to allow the software to make changes to my harddrive. I click yes and then it goes to desktop. But the software never starts. I tried again with the task manager open and the Recovery Management task runs, but then stops after a while.
View 1 Replies
View Related
Oct 19, 2014
My Windows 8.1 Acer Aspire AO756 turns on with fan running, but the screen is black. How can I get it to boot up?
View 4 Replies
View Related
Oct 15, 2007
if anyone has tried to put a 7950GTX from an M1710 into the Precision M6300. My boss wants me to order one for him but he wants to know if he can put in that card for gaming reasons.
View 11 Replies
View Related
