Dell Latitude E5520 :: Docking Station - How To Get Two DVI Monitors Working Instead Of One
Apr 18, 2013
I just got my docking station for my Dell e5520. I got the one monitor to work with the VGA set up. I would love to get the two DVI monitors working instead of one monitor. I am not sure if this is possible or not. If it IS possible, how do I go about doing it?
We have an unusual problem with a Dell Latitude E5520. It has been built with Windows 7 32bit SP1 and McAfee EndPoint Encryption, as we do with all of our laptops.
When the laptop is powered on and then docked, everything works fine. If you then give the laptop a restart whilst docked, it just doesn't! It shuts down and stays in some kind of power save mode. I have been through all of the Power options, including closing of the lid and turned off everything that could be causing this to happen, but still nothing.
If the power button is pressed whilst docked, the light comes on but that's it, no activity. Undock it, power up, close the lid and dock it again, all of the external screen, keyboard and mouse work as you would expect. I believe all of the drivers are up to date (it is a new laptop).
The docking station is an E-Port Plus DP/N: FFCV6 A00
My Latitude e7240 when docked onto the PR03X docking station, the power adapter that is plugged into the PR03X completely goes dead. The only way I can reset the power is by unplugging and replugging the AC adapter FROM THE WALL. Tried the spacer. Tried double powering (1 adapter into the PR03X and another adapter into the e7240). Also tried plugging the laptop on first without power, and when powering up the laptop, it would boot up 10x slower than normal and sometimes hang. Also tried multiple other PR03X just to be sure the one i have is not faulty. The same problem is repeatable. The laptop has the latest BIOS.
It seems there is a power mismatch of some sort that would cause a) the adapter to fail, and then b) for the laptop to run extremely slow because of what?Is the problem caused by a faulty docking port on the e7240? I assume the PR03X is compatible to the e7240??
The USB ports on my new E Port II docking are not working with my new Latitude E7240 Laptop. Full configuration of the laptop is below. Talked with Dell and they sent me a replacement docking station but the same issue surfaced. Looked at the Device Manager and no extra USB ports show up when connected to the docking station. The side laptop USB works fine when the docking station is connected.
I just received my new t430 and having issue with dual monitors. I am using the Intel HD 4000. I have it connected to a ThinkPad Port Replicator Series 3 (Type 4336). The docking station only support VGA connection. My new t430 only has a VGA connection on the side.
I have 2 monitors. One is connected to the VGA on the docking station. The other is connected to the VGA on the t430 itself.
While the machine is docked, Monitor #1 that is plugged into the docking station works, while Monitor #2 that is plugged into the t430 does not.
While undocked. Monitor #1 does work (obviously because undocked), but then Monitor #2 does work.
So I know both monitors are working and configured for VGA input. My questions is, why can't both work at the same time? While undocked, I can use laptop screen and Monitor #2 as a dual monitor. So I don't believe there is something wrong with the Operating System (Windows 7).
I used to be able to do this on my t420. With one monitor using VGA, and my other monitor using a DisplayPort. But looks like this model my company purchased doesn't support a DisplayPort (at least don't have the connection.)
I am running a IBM Thinkpad W540 with a Lenovo Ultra Dock Docking Station 170 (Model 40A20170US). I have 3 Asus 23.6" LED HD Monitors (Model VN247HP). These monitors have a standard VGA connection and 2 HDMI ports, By default you are provided a VGA cable and a HDMI-DVI cable. When I plug these monitors into the Ultra Dock no signal is found(including the VGA).
When I plug into the direct VGA port on the laptop, the monitor gets signal. If I use a Mini-DP connection with a Mini-DP-DVI adapter I get signal just fine. If I plug my this monitor into my desktop under HDMI and DVI connections it works just fine.
I have gone into the bios and confirmed that under display the "Video Mode on Dock" is set to Advanced(I tried standard and it did not work any better). I have the latest video drivers for the Intel HD graphics driver (10.18.10.3412) and the NVIDIA Quadro K1100M (22.214.171.12452). The USB ports work just fine, as does the power cable for the docking station. I tried applying the latest firmware update but the program runs and nothing happens. I checked for any other drivers that might have resolve the issue but have not had any luck.
all I got a new E6410 and 2 docking stations around a month ago.The problem I have is that when the notebook is in my office docking station it is really really slow.I can watch while window contents are draw, switching messages inthugnerbird takes a couple of seconds.In the home dokcing station everything is fine.
I have a Dell Latitude E6820 and have just connected a new Dell E-Port Plus II Docking station. Plugged in to the docking station are two monitors, one plugged into DVI Connector 1 and the other plugged into DVI Connector 2. The laptop is running Windows 7 64 bit.
Try as I might, I can not get the system to recognise the second monitor. I have tried the following to get this to work.
- Enabled Optimus (I think that is what it was called in the BIOS) - When I enabled this, neither of the monitors would work via the docking station
- Disabled Optimus - One monitor works
- Attempted to detect the other monitor via Control Panel > Display > Adjust Resolution (monitor not detected)
- Swapped monitors and cables in case it was a cable or monitor issue. All Cables and Monitors have been verified as working as expected.
- Attempted to connect one monitor via VGA cable. Only one monitor was detected
i have a number of Dell D600 latitude laptops in the organisation,all identicial. Strange thing is that one of them will not work with the docking station, any Docking station to think of it. this is the error message i get " Your power adapter does not supply enough power to run the attached docking station" press F1 to shut down
Just started using brand new Latitude E7240 and connected to E-port docking station. When booting an error pops up as below: The battery currently attached to the system will not supply enough power to dock for it to function. Please attach AC power to the dock for it to function normally
F1 - continue
F2- change setup options
The Laptop and the dock stations are brand new. This is only happening with the 7240's.
My Dell Latitude E6400 laptop reboots when inserted in the docking station. I can run all day and say I hot dock it out of the docking station and go away for half an hour. While away I use the laptop. When I return I snap the laptop back onto the station and.... it reboots! It started about a week ago. Always worked before. The peripherals are two displays, ext kybd, mouse. No USB stuff. Ethernet connected in the dock. This setup is unchanged for months now. Docking contacts clean. Under laptop too.
BIOS is most recent (did a few months ago). I reset defaults in the BIOS today after looking for any setting that may change this issue, but no improvement. Device Manager has nothing relevant either. What's wrong? The hard reboot is really bad as I lose all my in progress work and get all these Auto Recover files to manage... and logins... and restart apps... I'm not interested in putting the computer to sleep between transitions, as it has always been working flawless up to last week.
when I dock my in my E-port docking station, my CPU usage will shoot up to 100%, and it may come down periodically to the 80s or 90s, which makes my laptop virtually unusable for anything. I tried a different power cord but it made no difference. Undocked, it works just fine, so it's obvious it's something wrong with the docking station.
We are running more than200 dell computers in our company. lately we purchased E7240 for some users but it looks like the AC adapter does not work with the Dell E-Port docking station we have and that cause the USB hubs not to function at all.
Currently the workaround is to plug the AC adapter to the laptop instead of the docking station.
Our BIOS is updated to the latest version. also a message comes up when the ac adapter connected to the docking station before the windows boot up saying the ac adapter won't charge.....
I was given a Dell Latitude E5440 and a docking station for my work. I brought in a wireless mouse and keyboard that I use for input (the reason for mentioning this will become evident later). The computer and dock were NIB and are ~ 2 months old. I have a Dell external monitor plugged into the dock via a DVI cable, and use it as a secondary monitor.
One thing I noticed early on with this setup is that the interconnection between the computer and dock is 'flimsy', at best. If I move the computer/dock on my desk by sliding it around, I lose connection and the external monitor image disappears.
My current issue is related but a bit different, I think. On 3 separate occasions in the past couple of weeks, the notebook screen has gone black without warning and the system has shut down. Once I was able to get the system back on, I was able to determine that the cause was that the battery had drained to 5%, and the system had shut down.
What I find odd is that this has happened while the unit is on the dock. What is even more odd to me is that, apparently, while the notebook has lost power connection to the dock, the video connection to the external monitor remained in tact. That is, in fact, the main reason I did not notice that the battery was draining. That, and the fact that I was never shown a warning that the battery was getting low and I should find an outlet. So, only the power connection pin or pins of the dock appear to be affected. This happened last night when I left for home. I had not touched the computer all day, since I have the wireless keyboard/mouse I mentioned above, but I did shut the lid to put the system into sleep mode. However, during the night, it apparently shut off because, the next morning, when I went to turn it on, I was greeted with a black screen stating the system had shut down unexpectedly and did I want to boot into Safe Mode. Upon booting, both PowerPoint and Word prompted me to 'recovery' my files that had been opened when the power was lost.
Questions: Why I would not receive a warning from the PC that the battery was getting low, so that I could either check the power connection or have time to gracefully shut down. That is much more preferable than the system behaving the same way it would if I had simply removed the battery when it was on.
I have a Dell Precision M4800, only a few months old. My docking station is a Dell E-Port Plus II, which came with the computer. Very recently, after an update to Dell Command Power Manager, whenever I dock my laptop to the docking station, Dell Command Power Manager will say 'The power adapter attached to your docking station is not recognized', and my system will run slowly. I have a power cord separate from the docking station that, when I plug in, will charge the laptop just fine. I am using Windows 7. What should I do? Is it the Dell Command Power Manager's failure?
I have a TravelMate TMP645-MG connected to ProDock II. The problem is that the USB ports on docking staion are not working, I can see the following yellow exclamation mark in device manager when the docking station is connected (no errors when not docked).
Windows 8.1 Enterprise, 64bit. All latest drivers from Acer homepage are installed.
I have an XPS M1530 running Vista Home Premium 64-bit, T-9300 Processor, 6 gig RAM, 320 gig 7200-rpm harddrive. I am using it with the Kensington SD100S Laptop Docking Station (with stand) and a 22" Samsung monitor (monitor as primary display and laptop display as secondary display) and the Dell Bluetooth keyboard and mouse. The Kensignton docking station attaches to the M1530 via USB.
My question is, is it safe for me to detach the docking station when the M1530 is booted up and running? What about detaching the monitor? Except when I have an external USB harddrive turned on, there is not anything in my tray icons to indicate (as far as I can tell) that any hardware needs to be safely removed.
I have a 2nd AC adapter in my den separate from my home office, but I so rarely take the laptop mobile in the house since I power down first. Please let me know whether I am being too cautious, and if it is safe to detach the docking station and monitor while running any precautions that I should take. I do have my XPS backed up via Ghost if a problem should happen.
I have a ThinkPad X240 laptop with Windows 8.1 Enterprise x64 installed. Sound plays just fine from the laptop's speakers, and when I plug external speakers into the laptop's 3.5mm audio port they work just fine too. when the laptop is docked in my Ultra Dock 90W docking station and the external speakers cable is plugged into the dock's audio port, no sound is heard. If I'm playing music through the laptop's speakers, as soon as I plug a cable into the dock's audio port no sound is heard. I can still use the laptop's audio port to connect external speakers, but that defeats the object of having an audio port on the Ultra Dock.
The Ultra Dock has (I believe) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > Sound, video and game controllers > Realtek High Definition Audio > Driver version is 126.96.36.19988 which is the latest available from Lenovo Support downloads. What do I need to do to get the Ultra Dock's audio port working? I mistakenly posted this message on the "X Series tablet ThinkPad Laptops" board.
I have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
I'm looking for a laptop that has a port that allows it to connect to a docking station that will actually provide power to it.
I see a lot of them have docking stations available that connect via USB, but you still need to connect a separate power supply to the laptop. Ideally,
I'd love to have one that connects to the docking station by "sitting" in it... i.e., rather than plugging a cable into the "special" port on the laptop, the port is underneath or even just in the back of the laptop in such a way that it connects to the dock by simply resting the laptop up against it.
I just ordered a docking station from ebay. Everything looks good and works fine except when I plug in my power cord to the dock it the computer says the adapter doesnt supply sufficient power to charge the laptop and requests that I plug in a 90W adapter.
The thing is I'm using the 130W adapter that came with my laptop. If it makes any difference my adapter is a PA-4E model and the dock is the E-Port Plus Replicator
My daughter's D610 slowly died during a 10 week car holiday trip in Northen Australia. From the description of how it gradually happened I assumed it could be bad power connection and eventually the battery failed.
Completely dismantled very carefully and tested the power connector, whilst not perfect I believe the solder joints were acceptable.
When power supplies PA10 or PA12 plugged in directly to the laptop no lights of any kind, with or without battery. Checked with other battery too, same result. The power supplies do deliver right voltage and good under load.
Have a docking station and partly to my surprise with the 95W or PA10 power supply the D610 works fine. With the PA12 or 65W power supply the docking station refuses to work telling you to shut down and replace the power supply.
Ran into a problem when I tried to test with the car power converter, which delievered enough power but was not recognised so docking station again refused. The second D610 I later had to hand allowed the car power to be used but under "protest", warning that performance might be poor. Eventually I got the PA10 which was accepted.
I have a second D610 which works fine on all 3 power supplies. Now having option for swopping parts, I would like to know what I can try to figure out what is causing the power interruption?