I own a Pavilion DV9700 notebook and I noticed that as I was opening my display, the image would disappear. Upon gutting half of my laptop, I noticed that a display cable was ruptured (stuck under a hinge). I took a picture and pointed out the ruptured cable (see below).
following question:
1. What part do I need to order?
2. Are there DIY instructions out there?
I have a dv9000 series and the the ribbon cable that goes from the power button to it's respective conector on the motherboard is a bit damaged one of the metal contacts at one end has "skinned" off.
What would you do, look for a replacement online, i doubt a shop would stoc such a thing, of do these cables tend to be standard, the model number of the cable is E118077.
Also you should be able to completely remove a motherboard, including detaching it from the screen and still power the fan on, obvioulsy with the battery connected?
It's this cable, [url]
could you somewow slice the end off and then cut a small section so you have some new contacts showing?
My Pavilion dv9000 screen is black. I know the graphics card is faulty, what are my options to get this replaced. If I purchase and replace the motherboard will I get this same problem later down the road.
View 1 Replies View RelatedI have a Pavilion dv6 with windows 7 operating system. the cable works with my friends computer to the tv but not from mine to the Tv.
View 9 Replies View RelatedI have a hp probook i3 4320s, and recently i buy a new lg led tv, my problem is my new tv cant get signal from my laptop....
View 6 Replies View RelatedI have an XPS M1530, 18 months old, and I am very happy with it.
Over the past few weeks I have noticed a problem with the display, any white parts of the screen image show as red or turquoise colour heavily lined, or black text may have a red halo.
I can easily correct this by changing the angle of tilt of the screen....
So for a while now I've been using my laptop while it's plugged into my tv. But the parts of the screen are cut off (the top, left, right and bottom, which doesn't make sense since there is no reason to cut off all sides) I've seen guides telling you how to disable the overscan in the video card settings or in regedit but the thing is, I HAVE NO VIDEO CARD. The guides online assume you have one, but I don't my laptop is as plain as it gets. How can I disable the overscan (if possible)?
I have searched through my tv's settings but have found nohting even remotely related to overscan settings.I have a hp pavilion 15-n221sa running windows 8.1 and I'm trying to get the display to work on a samsung le46b650 tv.
I was watching a film on my projector, from my Lenovo T510 laptop, using a Display Port to HDMI cable. There was a thunderstorm and a powercut during the film, but my laptop wasnt plugged in at the time. Then when I touched the Display port end of the cable, which is plugged in to my laptop, it was too hot to touch, and had was slightly bulging and mis shapen! Now it has cooled down and just looks and feels normal. Very strange, and I dont see how it could have been related to the storm and powercut, but it seems a bit too coincidental! I have used this cable multiple times before and never noticed this, but then again maybe I wouldnt have ever touched it until it had cooled down. But I it was pretty much metling it was so hot, so I would think Id notice it.
View 3 Replies View Relatedmy hp 2000 laptop doesn't recognize tv with hdmi cable. I get the "doesn't recognize any other monitor" error when I attempt to "detect".
I recently upgraded to windows 8.1
I have the AMD Radeon HD 6310 Graphics
The TV is a Hotel Phillips HD TV.
My game system works using VGA cable
searching for the best spec'd DV9000 gpu, but my search results always just show up the overheating problem... does anyone know if there is a list around with all the different options of DV9000's? I currently have a 7600 go GPU, and I just bought a DV9000 mobo for $3 with a 7900 go GPU on it. As I can get them fairly cheap if I'm lucky, I want to find out what is the best GPU available on a DV9000 system board.
View 4 Replies View Relatedi just took apart my laptop yesterday to change my cpu on it. i was running T7500 and changed it to T8300 and man.... that T8300 is so cool. with AS5 my idle temps are down to 25-27*C thats a HUGE jump from my old T7500 which was a mini baking oven.
but anyways.... it took me 3 hours to take everything apart watching videos videos on hp.com but onc ei took it apart, i looked at the HSF and man its one of the weakest hsf i've seen. the only part thats copper is just a tiny square base thats on top of cpu. everything else is crap. and there were some pads on the end of the hsf to i guess cool the little things on the side. (forgot what they were called) i wanted to apply the AS5 to all the places that the pads were touching, but that part of the HFS was not copper. i'm not sure what it was.
i'm sure everyone that ever replaced cpu on the DV9000 had taken the whole laptop apart... have you guys ever thought about replacing the HSF with an aftermarket HSF thats better than the stock? i tried searching and found none that were any better than the stock. none of them are all copper.
and i did not want to put AS5 on the other things that has that white/beige pad on, since the bottom of the HSF looked weak and i did not want to fry the chips/what ever the pads were supposed to cool... can you guys help me find a better HSF for the laptop? or that stock crappy hsf is the best/only thing for me?
I have installed Intel X-25M SSD with Windows 7 Ultimate in my old dv9000 (CD, 1 Gb RAM), and it is quite a disaster. The laptop is getting hot, installing programs (Portal from Steam) results in 90 C on the processor and a shutdown...
I use RM CPU Clock to lower CPU multiplier from 13x to 6x (it works on my HDD and Windows XP, I don't have issues), but on SSD it won't help much.
Browsing: 70 C
Installing software: up to 90 C and sometimes a shutdown...
Playing games: up to 80 C
It all started when my dv9000 stopped detecting the DVDRW drive, i tried the same optical drive on a friend's laptop and it worked perfectly. I decided to go for an external DVD drive. After a while it stopped booting from the secondary hard drive (primary hard drive had crashed, so i installed vista on the secondary one). It detects the HDD, but it does not boot from it, the HDD is not even listed in the boot media list when you press f9 button at poweron. So i decided it was time to upgrade the bios, i entered my product number at the hp website, it gave a dv9627 as my model, in the bios its listed as a dv9500, so i downloaded the bios update for dv9500, boot from bootable USB Drive and did the upgrade. From then on my laptop never came on again. I found out about the crisis recovery tool, got a usb floppy drive, created the recovery disk, removed the battery held down the win + b first, plugged in power, powered on, left it for around 15mins, nothing happened, tried fn+b still nothing. The laptop screen just flickers once when i press the power button, power led on, hdd led comes on and then goes off, media button led are all on, other than that no sign of life, but the processor gets alittle hot so i suspect its still functioning. I really need help, i believe the bios can be recovered without sending the laptop to hp. I'm a student running on a really tight budget.
View 10 Replies View RelatedI having some problems with a DV6000 notebook.
I originally set the machine up with two partitions, one for his documents and the C: My problems started when I was doing some routine maintenance to the machine which belongs to my brother. The C partition was getting quite low so I decided to knock some space of d and add to c. I have done this many times using partition magic but for some reason it failed.
This left me we a hall.dll error on boot, however the machine will still boot if I pressed enter. It also meant that I had about 2 gig of partitioned space, plus the 1 gig for quick launch.
I re-added the 2gig space back to D using gParted, but still no luck, so I then decided to reinstall quick launch, which seemed to go ok accept that after I rebooted, Nothing, just a blinking cursor on the screen.
I then tired to do a recovery using the disks, of course though disk two and three are stuffed. I cant see anywhere, where it asks me to press f11 to restore from the recovery partition which still should be intact............
i have notebook dv9000 and works so fine and then today i try to turn on notebook and just show me the led power and then after a few sec turn off every thing.
View 4 Replies View RelatedI have read the stickies and have looked at this thread: HP Pavilion dv9000 laptop/notebook...vista to xp so LOST
It appears to me that these are all geared towards intel based machines. Mine is AMD Turion 64 X2 Mobile TEchnology TL-50 1.60 GHz. Will the above approaches work?
The speakers for my dv9640us are cracking when the songs have a little bit of bass, guess they're damaged. They're altec lansing. I was searching and found some posts saying very good things about harman kardon speakers and JBL,anyone knows if there is such a thing as speakers replacement or upgrade for notebooks? If not i guess i'll have to buy new altec ones.
View 5 Replies View RelatedI have a mystery that I hope someone can help with. My dv9000 (dv9308nr) won't connect with my daughter's NETGEAR wireless router. Specifically the router is a NETGEAR WPNT 834. My computer works great with my Motorola wireless router. It also works great with my mothers Linksys wireless router and the wireless router at work. Don't know the brand of the router at work. I've verified multiple times the network key, etc. My daughter's Apple Macbook with the same key works properly.
View 3 Replies View RelatedI have a DV9000 laptop and I have problem with the fan control and the Heat Sink. The tempeture of the GPU and CPU go very high (GPU 60 and CPU 48), but the fan runs very slow, like if the tempeture is ok and after that the computer stops. As well I want to replace the pads from the heat sink, so I would like to know which types of pads I should use for this computer and where the GPU is located, because there are three chips (the CPU in right side, one in the middle and another in the left side with the nvidia signature). my computer is Intel Duo and the bios is version D.25.
View 4 Replies View RelatedMy girlfriend has an HP dv9000 (17" laptop) i dont know the exact specs, only that she is running vista 32bit.
But the problem is that every time she has to either restart, return from hibernate, or return from sleep mode, the computer cant do it.
If its restarting or returning from hibernate, the computer will begin to start up, you'll hear a click, and it will power down and power up again, click, and repeat the process endlessly.
From sleep mode, the computer will turn the screen on and off like you just "woke" it.
between DV9000 vs DV6700
I know that the 9000 got bigger screen but how about:
-Who is newer?
-Is DV6700 got abit better CPU/RAM or else?
They all pre-own and price likely the same..
They have kasperski 2009 full internet protection. So heres the problem. One day they call me over that when they scroll on websites the text gets all squished together and the windows take forever to move/load. so we ran a scan and nothing came out wrong.
Then next time the computer was turned on the logo page that appears at the beginning that says HP and u could press the function keys to go to safety mode, it now never appears and there is a blank screen for about 3min and the vista sign appears and it starts. but overall the computer is very slow and has the scrolling problems. But a few days ago kasperski keeps popping up saying that black keys are missing and to update. So when ever i try it never updates just sits there at 0%. but we do have internet like firefox works fine just slow and the scrolling is annoying because after a while u can;t read anything on a page. But wat is going on? Is it a virus ? and i wanted to recover the computer cuz i do have recovery CD's but i can't even get to the function keys or safety mode and when i try it normally the computer either beeps and turns off or just turns off. i also tried system recovery and it didn;t complete. sorry i know this is alot but sometimes the screen goes black in random moments and comes back and says the screen drivers have recovered from like an error or sumthing. like i think it'd be best to just restore the computer at this point, but i don;t know how if i can't use the function keys or safety mode.
problem with my Dv9000. When I go to play a DVD it plays but very choppy like a scratched disk. I have tried many other DVD's and they all play this way. The movie seems to be going and stopping constantly. I have checked the processor and ram and they are not even being put under and load so I know it is not that. At least I think. I have also tried to use different programs to play the movies and the same thing. Could I have a bad dvd-rw drive?
View 5 Replies View RelatedI have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies View RelatedAnything new come out such as a driver or download that will help the laptop cool? Been trying everything for months with no lock. Called HP and they said its gonna cost me to fix something that the knew was wrong in the first place. Not to mention Wifi is going out. So any updates?
View 3 Replies View Relatedi got into reading about copper mod and from that thread i was pointed in the direction of undervolting thread.... well i decided to try it out
i read like the 1st 15 pages or so and decided to give it a try... downloaded orthos and HWmonitor, did a 100% cpu load for 20 minutes to find my max temp at load and i had 69*C highest on my core#1 (core#0 always seems to be cooler by 2-4*C almost all the time
ok so i bought this dv9000 from best buy over a year ago(meaning my warranty is over . And i had some problems with it a few weeks ago .
1. My hard driver died completly on me .
2. My uncle gave me his hard drive and i tried installing win XP
That didnt really work cause i couldnt figure out the graphic driver.
3. A friend of my dad`s installed windows vista(ultimate edition )
and everything works perfectly fine ......
With one exception ! whenever i try installing a game( WoW) it works but i cant get the 3rd expansion installed ... it goes up to 30% and it automatically shuts down without a warning or whatnot . The thing is that i THINK my vent is dusty ( not sure thats why im asking you people).
SO WHAT SHOULD I DO ? is it the vent ? im more than grateful to whoever tries to help me out with this .
i have an hp pavilion dv9000 that keeps crashing. most of the time when i move it from my lap and reach under the left side (hard drive cover) i get a mild shock through holes in cover.
View 5 Replies View RelatedMy roommate has a DV9000 with a wifiG card in it. We live in an apartment complex with 30-40 networks within our range. It is really slowing down our wireless performance because of how crowded the 2.4Ghz frequency is. I am a Thinkpad guy so I don't know how easy it would be, but is there an internal WifiN card for this laptop so we could move to a 5Ghz network?
View 4 Replies View RelatedI know what the website says for the DV9000t but wondered if there is a newer BIOS than the F.29 listed or if drivers for other models will work?
View 4 Replies View Related