Lenovo T400 / T500 :: T510 Very Hot Display Port Cable?
Sep 7, 2010
I was watching a film on my projector, from my Lenovo T510 laptop, using a Display Port to HDMI cable. There was a thunderstorm and a powercut during the film, but my laptop wasnt plugged in at the time. Then when I touched the Display port end of the cable, which is plugged in to my laptop, it was too hot to touch, and had was slightly bulging and mis shapen! Now it has cooled down and just looks and feels normal. Very strange, and I dont see how it could have been related to the storm and powercut, but it seems a bit too coincidental! I have used this cable multiple times before and never noticed this, but then again maybe I wouldnt have ever touched it until it had cooled down. But I it was pretty much metling it was so hot, so I would think Id notice it.
View 3 Replies
ADVERTISEMENT
Sep 17, 2013
I have a brand new TV with USB, RS232, HDMI connections and of course with a screen in16:9 aspect ratio. I want to use my existing RS232 cable to connect my T430 to the TV and display videos/movies that I want to view with others. HOWEVER, the video output always gets a black bar top and bottom from the T430 when the TV is connected. As a result, the image is stretched side-to-side both on the TV and on the T430 simultaneously showing the video. It is ugly. If I watch a movie in the very wide movie format 2.35:1, the bars are of course even larger and the movie is simply unwatchable it's so thin, top-to-bottom.
This is true regardless of the video source on the T430, either a movie via VLC or MediaPlayer off the hard drive, or streaming.
Two odd things: it does not happen if I play a movie on the TV directly from a USB key - it has a USB port and that works just fine. Also, if I simply unplug the RS232 from the TV then everything gets restored and the image on the T430 is perfect without any bars top and bottom.
In summary, a 16:9 video source connected to a 16:9 TV via RS232 is given black bars top and bottom, and there is no control on the TV that can correct this (TV has two settings for RS232 display, 4:3 and 16:9. 4:3 actually displays the 16:9 ratio correctly, but with a large black frame around it. And 16:9, the "auto" setting, gives the problem above).
So I have two questions:
1. Is there a setting on the T430 that I can adjust to resolve this issue so that the black bars are suppressed for 16:9 video replay?
2. If I switch to using the more expensive T430 minidisplay output (via an HDMI adapter) and connect that way, is it likely to fix this issue? I don't want to go to the expense of the adapter and HDMI cable if it will give essentially the same result.
This only applies to videos. That is, when I close down the video, the 16:9 desktop that shows on the TV is identical to that on the T430 and aspect ratio is not squished on either display.
So it's something to do with how the machine sends out the video streams via RS232 that's screwed up somehow.
View 1 Replies
View Related
Feb 3, 2014
I wanted to go today and get an adapter for my Lenovo Thinkpad T430 and first I thought I should do some research. This is how I found out that most of the Thinkpads do not send audio over DP, as I would have expected.
I have the T430 (no discrete graphics, just the integrated one) and Mini Dock Series 3 with USB 3.0 (EU1) docking station. The laptop has mini-DP and the docking has a normal DP. The normal DP works fine with my monitor, but it doesn't have any speakers in it , so can't test the audio part.
I checked in Audio properties in Windows (7 x64) and I don't see the video card there, so I am assuming it is not supported. I don't want to buy adapters if the laptop is unable to send audio over a DP-> HDMI adapter.
View 3 Replies
View Related
Jan 22, 2015
I bought this computer which is running 7win64 to update my T60 which I use with my home TV, a samsung digital running at 1360x768 resolution. The computer's native resolution is 1920x1080. I bought an hdmi adapter for the displayport from lenovo when I ordered the computer. Initially, the display works and at first it ran long enough to get everything set for a nice crisp display that fits the screen perfectly. The sound is there too, and is passed on to my receiver by the TV. Very nice. But then it begins to blink off until it doesn't work at all (the sound is cut off too). Lately it won't stay on long enough to review settings.
All updates are in place, both from microsoft and from lenovo. This has Intel 4600 graphics built in, and intel has graphics drivers available, but won't install them because of the lenovo supplied drivers.
I can't get any support from lenovo support because another device is involved.
I read online of some early users who had this problem with a docking station and i guess the problem was resolved with an updated driver.
View 3 Replies
View Related
Aug 27, 2013
I have a T510 with a 128GB Samsung Solid State drive that is out of space. I would like to replace it with a larger one, preferably a Samsung 840 series with 500GB. I do not want to get an additional drive for the ultrabay, but rather replace the one I have. While shopping and researching, it looks like the drive I have is 78.5 x 54 x 5mm and all of the potential replacements are 100 x 69 x 7mm. Will this fit into the existing drive space? If it will not, what should I get? It also looks like the current drive is SATA II while all replacement options are SATA III.
View 3 Replies
View Related
Dec 7, 2013
Windows 7 64bit on my T510 has died. When logging in, it hangs on the login screen forever. Windows recovery failed too. It ran for 8 hours and reported error (something like error in restoring a file and disk is full, though my C drive is half empty). After that all the Windows restoration points are gone. So I suppose I have to do factory reset.
My question is, I made two additional partitions on my hard drive using external tools, which store all of my data. So when I do factory reset, will these two partitions be overwritten? How I can recover the system while keeping all my data?
View 2 Replies
View Related
Apr 2, 2011
Recently my T510 9 cell battery suddenly stopped working. According to the Lenovo battery utility, the battery condition is poor and it suggests replacing a battery.
However, the battery seems still have 99% capacity, either by Lenovo utility or by other softwares. Before the failing it lasts 3-4 hours and charges normally.
I read several posts online and see some people have similar problems. It is suggested that maybe one of the cells fail so the circuit stopped the battery from working/or the safety circuits just malfunctions? Or indeed I need to replace the battery.
I understand that messing with battery is risky and I believe it is detected as not working for a good reason. However, I am wondering if there is a way to assure that my battery is completely dead, but not a problem with other hardware or the OS, before I purchase a new battery. For example, using a volmeter on the whole batteryto see if I can get a reading, or opening up the battery case and test on each cell?
Is it doable to replace a single cell if one of them fails?
PS: For people who says that they connect two terminals of the battery to a volmeter and see no readings, I believe you also need to ground the safety pin to turn on the battery.
View 7 Replies
View Related
Dec 28, 2013
I bought a T510 few days ago and was surprised to see this machine has ridiculously low volume. I have tried everything including the tweaks in Smart audio and removing audio limiter but still the volume is very low. On my dell 1525, I never go past 40% volume on my headphones but on T51o, I am using 90-100% volume to watch videos on live streaming websites.
Is there any solution to boost the volume on T510? My system is with windows 7 ultimate (64-bit) and audio device is Conexant 20585.
View 9 Replies
View Related
Dec 28, 2013
I have a lenovo T510 which has a maximum res of 1366x768 it has nvidia NVS 3100M graphics.Ive checked with nvidia and it says the gfx card supports 1920x1080.
If its possible could i buy a 1920x1080 lcd and fit it to this laptop without any problems.Or shall i just buy a 1366x768 lcd.
View 8 Replies
View Related
Nov 1, 2010
I just got a Thinkpad T510 and when I turn on the NumLock a little black box appears on the screen when it is on and I want to know how to make that not appear when the NumLock is turned on,
View 7 Replies
View Related
Dec 19, 2013
I've got little issues with screen brightness on my T510.
Sometimes after returning from hybernate/sleep I cannot control screen brightness at all (chaning it by Fn+Home/End or from PowerManager just dont work).
I have got latest nNvidia NVS 3100M drivers.
View 1 Replies
View Related
Nov 22, 2014
I've just out my hdd to check whether the ssd will fit there, just checked whether the slot is ok. Then I put back the original HHD very carefully. After that I opened the extra RAM slot, took it out and put it back, also VERY carefully. I didn't harm the laptop in any way.
Then I turned the computer on and it was just a black screen, nothing happening. No indicators lighted up, except for power button. I cannot enter BIOS, no response whatsoever.
View 3 Replies
View Related
Sep 3, 2014
I was originally under the impression that my laptop (Thinkpad T510 4384-DS9) had NVIDIA Optimus display technology, however, I cannot find any OPTIMUS options in the BIOS under display (or any other section for that matter).
The reason I would like to know is that I have recently purchased a docking station (model: 4338) and 3 external monitors which I would like to use simultaneously.
Forgetting the fact that I'm using Linux, and that for most people this wouldn’t be a challenge worth undertaking, I would just like to know if my system actually supports 3 external monitors and the laptop screen concurrently using the docking station.
[URL]
View 7 Replies
View Related
Feb 6, 2009
I have a T510 running Win7 64-bit. For at least 3 years, I have had the same dual monitor setup (2 DoubleSight DS-1900S) running off my minidock with the laptop closed. The rgith monitor is the primary, running off the DVI port, while the left uses the analog port. I was away for a week at Scout camp, powered on the system once while I was there, and when I came back to the office, my monitor setup started failing.
Specifically, the right screen is active but it no longer displays the signal being sent to it. When I powercycle the screen, I can see the display for about a quarter of a second, then it goes blank. When the problem first started, I could cycle it about 20 times and eventually it would stay on, until I left the unit overnight and it went to sleep, at which point the probelm started again.
Sounds like a wonky monitor? I have a backup set of monitors that I swapped in, and had the same exact problem, so that appears to rule out a mechanical defect. More fun facts: I can only use the laptop screen as a standalone display. I cannot get the multidisplay control panel to open, even though my left screen is powered up. However, one of my programs that normally launches to my right (main) screen will still launch, but not to my laptop screen. It really wants to live on my right screen, even when that screen is not powered on (I can close the program by accessing the icon bar at the bottom of my laptop screen).
View 2 Replies
View Related
Oct 15, 2014
I have recieved at work a lenovo t440 notebook, everything worked fine, untill one day I noticed that I cannot conect to the internet via lan cable. I plug in the cable and it is not detected. I checked the cable to another notebook and it was working. I have a Intel Ethernet Connection I218-LM controller, I have re-installed both network drivers from lenovo and intel websites and nothing works. I've tried as well to get automatically from windows update, no result. Went to bios cheked if the lan connection is enabled, everything was in place. Is there anything I missed? I noticed a weird behaviour, if I connect through wireless network, after sometime the lan connection is established and I can use it, but without wireless connection it doesn't work.
View 5 Replies
View Related
May 26, 2011
I bought a Roline DP to HDMI cable hoping to be able to watch HD content in my livingroom and not having to plug an extra audio cable as DP should carry sound too.
When I do the same as on the youtube video, I get the following settings in the control panels: [URL] ....
But there's no sound coming out of the TV. I've tried it on my SyncMaster PC/TV Screen and on my Samsung TV in the living room. On the TV in the living room, the windows audio manager shows the device, but it cannot be selected as show above. It stays grey.
I've got a T420s with discrete nVidia Optimus graphics (Quadro NVS4200M). Driver version is 1.2.19.0 for nVidia HD-Audio and 8.17.12.6696 for NVS 4200M. This information comes from the device manager. I installed my system from scratch and used ThinkVantage System Update 4.
Where the problem comes from? I could only imagine that the cable isn't capable of carrying audio, but that seems rather illogic, does it?
View 9 Replies
View Related
May 31, 2014
My LAN port seems to be unstable. I insert the cable and hear the clicking sound but no LED turns on. I have to push the cable further to get the indicator on. It may also disconnect if the cable moves.
Is this a faulty port? And, if so, what does it take to fix it? (i.e. what do they replace/fix?)
View 6 Replies
View Related
May 4, 2014
Bought a refurb T400 and installed a PNY SSD in it. It POST's okay and I can access bios. I can also read/install Linux from DVD just fine.
Trouble is when I insert my win7 home premium DVD into the drive and boot it, I get POST and then I get a black screen. It seems to be reading the drive and when I interrupt with the Esc key or open the DVD drive, I get a Windows menu explaining that the installation has been interrupted.
I've looked at the bios options and can't see anything obvious that should be changed.
View 1 Replies
View Related
Dec 16, 2014
When I connect second display via regular VGA cable I can set the maximum resolution to 1920x1080, although native resolution for my external screen is 1920x1200.
I could just find posts related to similar problems when using docking station - tried some of the solutions, but none seemed to work.
Found this [URL] ... on dpreview - suggests using miniDP to DP 2-link converter (screen has just VGA/DP ports).
View 4 Replies
View Related
Jun 23, 2014
I got T510. The display went out and all I can see is flickering screen so I cannot see anything. I am getting T540p. What is the best way for me to move data from my hard drive to the new one? At least I would like to move pictures and documents, I got no backup.
View 3 Replies
View Related
Jul 26, 2013
Using the projector setting, I'm noticing a slight lag when I open/close any of the applications (ie: there is a momentary pause before the window either appears/disappears).
The external monitor is a Samsung Central Station (1920x1080) and connects to the laptop wirelessly via a USB/UWB dongle.
View 5 Replies
View Related
Nov 20, 2014
I just bought a Lenovo ThikpPad T540p as a replacement of my old Lenovo ThinkPad R61i.What i'm looking for, is to turn off the internal Display if Windows 7 is locked. On my old R61i, it was the Hotkey FN + F3. I was easy able to changing the function of F3 in the "Energy Manager 6" on the R61i.I did not found any similar option on the new T540p.Because i use is very often when i run the laptop during the night and i sleep in the same room. Then i usually lock Windows an turn off the display.
View 2 Replies
View Related
Jun 30, 2012
I have a 3-yr old Thinkpad T500 laptop w/ XP. My on-screen volume and brightness displays have recently disappeared. Spoke with customer support and was advised to download all the machine updates....did that, but still not working.
View 9 Replies
View Related
Dec 24, 2014
I tried to do fn + f7 to toggle display modes as I want only laptop or monitor display, not both. But when I do fn + f7, the small window pop up ask me if I want to turn on caret browsing or not. How to toggle display modes between laptop or monitor for t440p, window 8.1?
View 2 Replies
View Related
Jul 24, 2013
My T530 (a month old) is driving me crazy with this issue: Depending on which application is in the foreground, it will dim/undim the built-in screen (1600x900 version). I have turned off adaptive screen brightness in the power options, and I've turned off Film Mode Detection and Adaptive Contrast Enhancement in the Intel Graphics and Media Control Panel, but this "feature" won't go away.
How in the world can I get the screen to be on 100% brightness, unless I manually change it?
View 8 Replies
View Related
Oct 30, 2014
Windows 8.1, 64bit, all drivers up to date, Nvidia 730m, intel 4600. Fairly new issue (couple of months), laptop wakes from sleep but display does not function, everything seems to be working normally during, just no display. Forced to hard restart.
Just avoiding using sleep mode for now. Seems to be a software issue, upgraded to 8.1 when purchased almost a year ago, worked fine until recently.
View 8 Replies
View Related
Oct 13, 2013
I am trying to install the latest Intel HD Graphics driver but I always get the message that my system doesn't meet the minimum requirements... [URL]
I have a T430s.
Here is a screenshot of my dxdiag:
View 9 Replies
View Related
Jan 25, 2015
I have a T420 Thinkpad and have 2 external monitors connected; one using VGA into the docking station and one using DVI into the docking station. The laptop does not recognize the mobile PC display as an option when I attempt to extend to a 3rd monitor. The ultimate goal is 3 monitors extended: 2 external and 1 (the laptop display). Is this possible?
View 3 Replies
View Related
Sep 7, 2012
My T400 display works at BIOS startup but goes black was soon as Windows 7 starts to load.. Video out put works and I can see an UN Backlit image on the display. Is there some sort back light controller /driver that may be broken.
View 9 Replies
View Related
May 27, 2014
I updated the BIOS to 2.26 a while ago and ever since then there's no on-screen indication of caps lock on/off, screen brightness or volume when I change it. Since it seemed to be affected by BIOS, I updated again to 2.27 just now, but the problem persists. I needed to update the Hotkeys Feature Integration by downloading the utility thingy from this page. Probably wasn't a BIOS thing after all.
View 2 Replies
View Related
