Lenovo T400 / T500 :: Replace Internal SSD For T510?
Aug 27, 2013
I have a T510 with a 128GB Samsung Solid State drive that is out of space. I would like to replace it with a larger one, preferably a Samsung 840 series with 500GB. I do not want to get an additional drive for the ultrabay, but rather replace the one I have. While shopping and researching, it looks like the drive I have is 78.5 x 54 x 5mm and all of the potential replacements are 100 x 69 x 7mm. Will this fit into the existing drive space? If it will not, what should I get? It also looks like the current drive is SATA II while all replacement options are SATA III.
View 3 Replies
ADVERTISEMENT
Dec 7, 2013
Windows 7 64bit on my T510 has died. When logging in, it hangs on the login screen forever. Windows recovery failed too. It ran for 8 hours and reported error (something like error in restoring a file and disk is full, though my C drive is half empty). After that all the Windows restoration points are gone. So I suppose I have to do factory reset.
My question is, I made two additional partitions on my hard drive using external tools, which store all of my data. So when I do factory reset, will these two partitions be overwritten? How I can recover the system while keeping all my data?
View 2 Replies
View Related
Sep 7, 2010
I was watching a film on my projector, from my Lenovo T510 laptop, using a Display Port to HDMI cable. There was a thunderstorm and a powercut during the film, but my laptop wasnt plugged in at the time. Then when I touched the Display port end of the cable, which is plugged in to my laptop, it was too hot to touch, and had was slightly bulging and mis shapen! Now it has cooled down and just looks and feels normal. Very strange, and I dont see how it could have been related to the storm and powercut, but it seems a bit too coincidental! I have used this cable multiple times before and never noticed this, but then again maybe I wouldnt have ever touched it until it had cooled down. But I it was pretty much metling it was so hot, so I would think Id notice it.
View 3 Replies
View Related
Apr 2, 2011
Recently my T510 9 cell battery suddenly stopped working. According to the Lenovo battery utility, the battery condition is poor and it suggests replacing a battery.
However, the battery seems still have 99% capacity, either by Lenovo utility or by other softwares. Before the failing it lasts 3-4 hours and charges normally.
I read several posts online and see some people have similar problems. It is suggested that maybe one of the cells fail so the circuit stopped the battery from working/or the safety circuits just malfunctions? Or indeed I need to replace the battery.
I understand that messing with battery is risky and I believe it is detected as not working for a good reason. However, I am wondering if there is a way to assure that my battery is completely dead, but not a problem with other hardware or the OS, before I purchase a new battery. For example, using a volmeter on the whole batteryto see if I can get a reading, or opening up the battery case and test on each cell?
Is it doable to replace a single cell if one of them fails?
PS: For people who says that they connect two terminals of the battery to a volmeter and see no readings, I believe you also need to ground the safety pin to turn on the battery.
View 7 Replies
View Related
Dec 28, 2013
I bought a T510 few days ago and was surprised to see this machine has ridiculously low volume. I have tried everything including the tweaks in Smart audio and removing audio limiter but still the volume is very low. On my dell 1525, I never go past 40% volume on my headphones but on T51o, I am using 90-100% volume to watch videos on live streaming websites.
Is there any solution to boost the volume on T510? My system is with windows 7 ultimate (64-bit) and audio device is Conexant 20585.
View 9 Replies
View Related
Dec 28, 2013
I have a lenovo T510 which has a maximum res of 1366x768 it has nvidia NVS 3100M graphics.Ive checked with nvidia and it says the gfx card supports 1920x1080.
If its possible could i buy a 1920x1080 lcd and fit it to this laptop without any problems.Or shall i just buy a 1366x768 lcd.
View 8 Replies
View Related
Nov 1, 2010
I just got a Thinkpad T510 and when I turn on the NumLock a little black box appears on the screen when it is on and I want to know how to make that not appear when the NumLock is turned on,
View 7 Replies
View Related
Dec 19, 2013
I've got little issues with screen brightness on my T510.
Sometimes after returning from hybernate/sleep I cannot control screen brightness at all (chaning it by Fn+Home/End or from PowerManager just dont work).
I have got latest nNvidia NVS 3100M drivers.
View 1 Replies
View Related
Nov 22, 2014
I've just out my hdd to check whether the ssd will fit there, just checked whether the slot is ok. Then I put back the original HHD very carefully. After that I opened the extra RAM slot, took it out and put it back, also VERY carefully. I didn't harm the laptop in any way.
Then I turned the computer on and it was just a black screen, nothing happening. No indicators lighted up, except for power button. I cannot enter BIOS, no response whatsoever.
View 3 Replies
View Related
Sep 3, 2014
I was originally under the impression that my laptop (Thinkpad T510 4384-DS9) had NVIDIA Optimus display technology, however, I cannot find any OPTIMUS options in the BIOS under display (or any other section for that matter).
The reason I would like to know is that I have recently purchased a docking station (model: 4338) and 3 external monitors which I would like to use simultaneously.
Forgetting the fact that I'm using Linux, and that for most people this wouldn’t be a challenge worth undertaking, I would just like to know if my system actually supports 3 external monitors and the laptop screen concurrently using the docking station.
[URL]
View 7 Replies
View Related
Feb 6, 2009
I have a T510 running Win7 64-bit. For at least 3 years, I have had the same dual monitor setup (2 DoubleSight DS-1900S) running off my minidock with the laptop closed. The rgith monitor is the primary, running off the DVI port, while the left uses the analog port. I was away for a week at Scout camp, powered on the system once while I was there, and when I came back to the office, my monitor setup started failing.
Specifically, the right screen is active but it no longer displays the signal being sent to it. When I powercycle the screen, I can see the display for about a quarter of a second, then it goes blank. When the problem first started, I could cycle it about 20 times and eventually it would stay on, until I left the unit overnight and it went to sleep, at which point the probelm started again.
Sounds like a wonky monitor? I have a backup set of monitors that I swapped in, and had the same exact problem, so that appears to rule out a mechanical defect. More fun facts: I can only use the laptop screen as a standalone display. I cannot get the multidisplay control panel to open, even though my left screen is powered up. However, one of my programs that normally launches to my right (main) screen will still launch, but not to my laptop screen. It really wants to live on my right screen, even when that screen is not powered on (I can close the program by accessing the icon bar at the bottom of my laptop screen).
View 2 Replies
View Related
Jul 31, 2014
I just got my T440s a couple of weeks ago. I stupidly ordered it with only 4GB of RAM, thinking that I couple upgrade it myself if neccessary (and it would be much cheaper that way).
Well it seems 4GB definately isn't enough for my needs, so I ordered another 4GB stick. I installed it, plugged the machine in and powered it up. And was met with the tone for a memory error. Probably the module isn't seated correctly, but I suppose it could be faulty.
Anyway, you'll notice I said that I plugged it in before powering up. That means that the internal battery has been reactivated. I can confirm this because it will start (and give me the error) without being plugged in and without the external battery connected. So my problem is, how do I disable the internal battery again to remove or reseat the problem DIMM, since I can't get to the UEFI/BIOS configuration to disable it.
View 9 Replies
View Related
Jul 21, 2014
On my W510, I would like to set the volume on the internal speakers to "mute" while setting a different volume on the headset jack, in windows 7
This is so the laptop will not play any sound when the headset is unplugged, but work normally when headset is plugged in.
Normally I can find 2 different audio devices in windows, and control them separately.
Does the thinkpad support this? Do i need special drivers?
View 1 Replies
View Related
Jul 5, 2010
my 4-in-1 card reader (04W1701)is on the fritz, can't find any on ebay, but there are plenty of '5-in-1' (FRU 45M2658) to be had. Can I use that instead?
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit
View 6 Replies
View Related
Mar 15, 2014
How I assume the switch between headphones and speakers should work: I turn on music or anything esle and if no headphones are plugged in, every sound comes from the internal speakers. Now if I plug in headphones then the sound comes exclusively from the headphones. If I pull then out again the sound comes from the speakers and so on.
In my case the situation is the following: If I have no headphones plugged in and turn on music, then I hear if via speakers. If I decide to continue listening to that music via headphones and plug them in, then the music continues to come from the speakers, but for example the notification sound from outlook comes from the headphones. This works vice versa.
If I open, say youtube to watch a video, while having the headphones plugged in, I will hear the sound via them. If I now unplugg them, the speakers will stay silent.
What can I do that if there are no external speakers plugged in (headphones etc.) every sound will be played by the internal speakers, if I plug in some sort of external speaker it comes from them and if I unplugg it it switches back to the internal speakers?
View 7 Replies
View Related
May 4, 2014
Bought a refurb T400 and installed a PNY SSD in it. It POST's okay and I can access bios. I can also read/install Linux from DVD just fine.
Trouble is when I insert my win7 home premium DVD into the drive and boot it, I get POST and then I get a black screen. It seems to be reading the drive and when I interrupt with the Esc key or open the DVD drive, I get a Windows menu explaining that the installation has been interrupted.
I've looked at the bios options and can't see anything obvious that should be changed.
View 1 Replies
View Related
Jan 26, 2012
I have tried to make a fresh Windows 7 installation, but after installing updates via Lenovo System Update the system gets corrupt.I replaced the hard drive on an T400 and loaded a image that I had on to the drive. After a installing a few updates and program I noticed strange system beaver. So I did a system file check and it came back that files was corrupt and cold not be repaired.So I did a new fresh Windows install. But it to became corrupt after just running Windows Update and Lenovo System Update.So I ran some hard drive and memory diagnostic without find and problems.
Then I did a new Windows 7 install again. After I installed all recommended updates from Windows Update I did a system file check, all OK. The I installed Lenovo System Update and all its recommended updates and did a new system file check, Windows system files corrupt. What Lenovo update is destroying the system?
View 4 Replies
View Related
Feb 17, 2010
My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake up from sleep mode after lid is closed. I finally reverted to using hibernate but was just wondering if there is a new fix that I am not aware of. I tried to find info a couple of years back before switching to hibernate.
View 7 Replies
View Related
Apr 7, 2013
Is it possible to run a t500 without a battery? I found a t500 in my basement without a battery or adapter, however i am not sure if it works or not, so i was wondering if i could just buy the adapter to see if it boots up or not because i don't want to go through the process of returning etc.
View 2 Replies
View Related
Sep 17, 2013
Is it possible to clear the TPM security chip through WMI? We are using T410, T410s, T420 and T430.I have looked at the following link, and it seems that it isn't possible: URLs....
View 4 Replies
View Related
Sep 3, 2013
I have a T420 Full model number: 4180-PR1
I have a 320 GB HDD, but it's nearly full, I am thinking about buying an SSD.
I wanted to know is it possible to have 1 SSD and keep the existing 320GB HDD and run it alongside each other?
If so, where would the SSD go?
T420 4180-PR1 - OS: Windows 7 Pro 64 bit
View 9 Replies
View Related
Dec 28, 2012
I recently got a T440s and wanted to replace the hdd with the SSD from my old laptop, and it is not being detected at boot. It works fine in my e420s.The SSD is a Kingston V+200 240GB. It's a 7mm drive.When I turn on Diagnostic boot in the BIOS I get the following error message:
PXE-E61: Media Test Failure, check cable
PXE-M0F: Exiting Intel Boot Agent.
It seems like their is a problem with the connector? The SSD in the computer can actually wiggle around a little bit (<1mm), it seems like it shouldn't do that.
View 1 Replies
View Related
Jul 16, 2008
A key ? for me in purchasing a new machine is how to arrange 2 accessories: DVD player and a 2nd drive (primary drive would be an SSD).
From what I understand, I cannot swap out a HDD and DVD in the ultrabay--if going with a second HDD, the HDD is permanently installed. This implies that you make the pre purchase decision to either have a HDD or DVD player connected by USB and the other in the ultrabay.
Would one opt to have the HDD in the ultrabay due to increased data throughput vs. a USB 3x port?
View 5 Replies
View Related
Apr 23, 2010
How do I turn off the UltraNav pointing device? I just use the Trackpoint and its very frustrating to keep brushing against the UltraNav and move the cursor unexpectedly. Note that my T400 doesn't have either the Thinkvantage Productivity Center or the Thinkpad Configuration programs installed.
View 8 Replies
View Related
May 30, 2014
I just opened my laptop today, and when I used F1 to unmute, it 'clicked' a sort of odd, plasticky click. I hit it again a few times, and it always clicked. So I took the key off to check. I didn't see anything wrong, no broken plastic. After taking it off and putting it back on a few times, it now only clicks when I apply pressure in the top left area of the key.
View 3 Replies
View Related
Oct 1, 2014
I have just bought a T530 for my sister, which is due to arrive soon, but on closer viewing, I realise that it doesn't actually have a webcam. Looking at the pictures of the T530, it seems that the bezel doesn't have the necessary hole for the webcam to see out of. It looks like the space is completely filled in. Are all T530 front bezels the same? Is it possible that it is just some kind of blanking plate in the space where the webcam is behind, which can be removed?
I have been searching online but to no avail. I am not sure if I need to buy a whole new bezel for the T530 + a 720p camera (part number: 04W1364?)+ a viewing window to go in the bezel?
Here is the ebay listing of the T530 I have bought: [URL] .....
and here are the parts I am thinking of buying... do I need to buy a new T530 bezel as well? [URL] .....
View 2 Replies
View Related
Nov 26, 2012
I'm an owner of T430. I have toshiba hitachi 500gb and mini ssd 16gb running windows 7
Right now as I was working on an assignment i got a Microsoft Warning that my Hard drive was failing and that i have to run a back up (which I am doing right now)
Never had this problem and I've been using computer for awhile now and it's my first time seeing the warning window. Is there a way to see if this is a "real" problem? is it caused by viruses? and is it covered by my warranty?
I just ran lenovo solution center hard ware scan and passed everything except my mini ssd. with a code WHD00D001-UI4W8F.
So it seems like my hard drive is working fine, I had some problems with hardware scan failing my mini ssd before.
View 1 Replies
View Related
Oct 13, 2013
T400 - ONE
I have a problem with two T400 thinkpads. The first T400 was dead when I bought it ( suspected graphics card ) . Well I managed to get this laptop to boot up. The screen was black but I found by chance that if shine a lamp or light on the screen it is working. Now being able to see what I was dooing on the screen faintly. So I updated the bios & that did not fix the problem but I was well happy about finding out this trick. I then added 8Gb kingston ram which works with my other T400 laptops. I installed Win 7 ultimate. The laptop is working fine. No issues just extreamley dark screen almost black "but working" Very strange indeed.
T400 - TWO
Now the second laptop was working fine. But I was swapping the parts with the non working laptop to determine the problem. Now I have two T400 laptops with a dark almost black screen. But over about a month working on them I am making progress. I am determind not to give up on these computers. This is not like fixing or repairing a computer. More like rezerecting a computer. I did not intend to spend so much time on these laptops but I have found a common problem that effects a lot of people. I would love to know why a working laptop when re- assembled gives an almost black screen & still works. Normally I would just buy a new motherboard & bin the defekt one. What I need is some command codes to try to make the screen brighter. Is this planned obsiletion or just a graphic defekt myth. Because after throwing away more supposidly dead motherboards with a graphic defekt than I can count. I am starting to think that if I get the brightness back on my computers I will have sloved a major black screen problem. It is not the graphic processor. I have been playing fifa 14 with a lamp shining on the screen. It played fine, not jumpy ,no colour stripes just very dark.
View 9 Replies
View Related
Oct 23, 2013
We just bought 15 T430S model N1RLPGE/2356LPG. We install all our notebooks with a running DHCP/PXE environment. A formerly ordered notebook, same type, but an older BIOS (Version 2.02) accurately got itself an IP address during PXE boot and startet the installation. The new T430S (all delivered with BIOS version 2.55) don't even get an IP. I already tried updating the BIOS to the newest version 2.56, but this didn't solve the issue. I checked everything at least twice.
MAC address for IP reservation: correct. Swich (Cisco) portfast is enabled: correct. An older notebook with BIOS 2.02, installing smooth and sound.
When I start the BIOS version 2.56 notebook with a Knoppix DVD, I get the assigned IP address. But not during PXE setup. I also checked the available BIOS and PXE options of the notebook/ethernet card. No options that solved this issue.
View 9 Replies
View Related
Aug 17, 2014
I recently got a T430 and the H key doesnt work when i press it with 2 other keys at one time all i hear is a beep also it was a gift so i cant return it....
View 7 Replies
View Related
